Carry more ammunition “at the ready”: Professional operators who are unwilling to sacrifice quality, performance, and durability, will find Mesa Tactical’s polymer shotshell carriers to be an especially attractive and economical alternative to the low-cost consumer grade plastic shell holders offered by competitors. SureShell® Polymer Shotshell Carriers are made from durable, impact resistant polymer. This shotshell carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. The Sureshell receiver mounting system for Remington 870, 1100 and 11-87 shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Models are available with and without integral Picatinny rails for mounting optics. Like all SureShell carriers, the new polymer SureShell shotshell carriers work well in all climates and environments, and are designed to withstand the daily use and abuse to which arsenal weapons are commonly subjected. This system securely holds shells in place until needed at which time they are readily accessible and easily removed for rapid reloading.
SPECS: Injection molded from glass filled polymer, lightweight aluminum backplate, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 6-Round Sidemount – 6¼” (15.8cm) long x 1½” high. 5.4 oz. (152g) wt. Rem 8-Round Sidemount – 7¾” (19.7) long x 1½” high. 7 oz. (200g) wt. Remington Picatinny fits models 870/1100/11-87 (may require modification to gun). 7” (15.8cm) long x 2½” (6.3cm) high. 7.6 oz. (215g) wt. Mossberg fits models 500/590. 6-round ony. 6-3⁄8" (16.2cm) long x 1-3⁄8" (3.5cm) high. 5.2 oz. (147g) wt.Benelli Sidemount fits M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) long x 2½” high. 6.3 oz. (179g) wt. Benelli Picatinny available for M2 (requires drilling tapping receiver to fit M1), M4/M1014, and Supernova. Benelli M2 6-Round Picatinny – 6” long x 2 (5.1cm)” high. 7.4 oz. (210g) wt. Benelli M4/M1014 6-Round Picatinny – 6” long x 2” (5.1cm) high. 7.5 oz. (213g) wt.
* Requires use of shorter forend on Rem 870.
+ Requires minor forend alterations to fit Rem 1100/11-87.
** Requires drilling/tapping receiver to fit M1.
Trasporta più munizioni “pronte all'uso” con SURESHELL!
I portamunizioni in polimero SureShell® di Mesa Tactical offrono un'alternativa economica e di alta qualità per gli operatori professionisti che non vogliono compromettere prestazioni e durata. Realizzati in polimero resistente agli urti, questi portamunizioni sono disponibili in una configurazione da sei cartucce e presentano portacartucce stampati ad iniezione in polimero rinforzato con vetro, fissati al ricevitore tramite una leggera piastra posteriore in alluminio con inserti filettati in ottone.
Il portamunizioni SureShell include anche un innovativo sistema di attrito a doppio gomma che tiene saldamente in posizione le cartucce. Alcuni modelli sono dotati di guarnizioni in gomma die-cut autoadesive ad alta temperatura per proteggere la finitura del fucile ospitante. Il sistema di montaggio SureShell per i fucili Remington 870, 1100 e 11-87 utilizza una combinazione di fissaggi in acciaio avvitati in un perno in acciaio (nella parte posteriore) e viti Chicago abbinate (nella parte anteriore) per un attacco più sicuro al fucile, senza il rischio di pizzicare il ricevitore.
La piastra di montaggio presenta anche una finestra sopra la posizione del numero di serie del fucile, facilitando il lavoro agli armieri per inventariare le loro armi. I modelli sono disponibili con e senza rotaie Picatinny integrate per il montaggio di ottiche. Come tutti i portamunizioni SureShell, i nuovi portamunizioni in polimero funzionano bene in tutti i climi e ambienti, e sono progettati per resistere all'uso e all'abuso quotidiano a cui sono comunemente sottoposte le armi d'arsenale. Questo sistema tiene saldamente in posizione le cartucce fino al momento del bisogno, rendendole facilmente accessibili e rapidamente rimovibili per un ricaricamento veloce.
SPECIFICHE:
- Stampato ad iniezione in polimero rinforzato con vetro
- Piastra posteriore in alluminio leggera
- Colore: nero opaco
- Per calibri da 12 gauge solo
- Tutti i modelli includono hardware di montaggio, guarnizione in gomma e istruzioni per l'installazione
- Modelli solo per mano destra
- Il montaggio laterale Remington si adatta ai modelli 870/1100/11-87 (potrebbe richiedere modifiche al fucile)
- Montaggio laterale Rem 6-Round – 6¼” (15.8cm) lunghezza x 1½” altezza, peso 5.4 oz. (152g)
- Montaggio laterale Rem 8-Round – 7¾” (19.7cm) lunghezza x 1½” altezza, peso 7 oz. (200g)
- Picatinny Remington si adatta ai modelli 870/1100/11-87 (potrebbe richiedere modifiche al fucile) – 7” (15.8cm) lunghezza x 2½” (6.3cm) altezza, peso 7.6 oz. (215g)
- Mossberg si adatta ai modelli 500/590 – solo 6 round, 6-3/8" (16.2cm) lunghezza x 1-3/8" (3.5cm) altezza, peso 5.2 oz. (147g)
- Montaggio laterale Benelli si adatta a M1/M2/M3 – Benelli 6-Round Sidemount – 6” (15.2cm) lunghezza x 2½” altezza, peso 6.3 oz. (179g)
- Picatinny Benelli disponibile per M2 (richiede foratura e filettatura del ricevitore per adattarsi a M1), M4/M1014 e Supernova
- Benelli M2 6-Round Picatinny – 6” lunghezza x 2” (5.1cm) altezza, peso 7.4 oz. (210g)
- Benelli M4/M1014 6-Round Picatinny – 6” lunghezza x 2” (5.1cm) altezza, peso 7.5 oz. (213g)
- * Richiede l'uso di un calcio più corto su Rem 870.
- + Richiede piccole modifiche al calcio per adattarsi a Rem 1100/11-87.
- ** Richiede foratura/filettatura del ricevitore per adattarsi a M1.