Carry more ammunition “at the ready”: Professional operators who are unwilling to sacrifice quality, performance, and durability, will find Mesa Tactical’s polymer shotshell carriers to be an especially attractive and economical alternative to the low-cost consumer grade plastic shell holders offered by competitors. SureShell® Polymer Shotshell Carriers are made from durable, impact resistant polymer. This shotshell carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. The Sureshell receiver mounting system for Remington 870, 1100 and 11-87 shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Models are available with and without integral Picatinny rails for mounting optics. Like all SureShell carriers, the new polymer SureShell shotshell carriers work well in all climates and environments, and are designed to withstand the daily use and abuse to which arsenal weapons are commonly subjected. This system securely holds shells in place until needed at which time they are readily accessible and easily removed for rapid reloading.
SPECS: Injection molded from glass filled polymer, lightweight aluminum backplate, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 6-Round Sidemount – 6¼” (15.8cm) long x 1½” high. 5.4 oz. (152g) wt. Rem 8-Round Sidemount – 7¾” (19.7) long x 1½” high. 7 oz. (200g) wt. Remington Picatinny fits models 870/1100/11-87 (may require modification to gun). 7” (15.8cm) long x 2½” (6.3cm) high. 7.6 oz. (215g) wt. Mossberg fits models 500/590. 6-round ony. 6-3⁄8" (16.2cm) long x 1-3⁄8" (3.5cm) high. 5.2 oz. (147g) wt.Benelli Sidemount fits M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) long x 2½” high. 6.3 oz. (179g) wt. Benelli Picatinny available for M2 (requires drilling tapping receiver to fit M1), M4/M1014, and Supernova. Benelli M2 6-Round Picatinny – 6” long x 2 (5.1cm)” high. 7.4 oz. (210g) wt. Benelli M4/M1014 6-Round Picatinny – 6” long x 2” (5.1cm) high. 7.5 oz. (213g) wt.
* Requires use of shorter forend on Rem 870.
+ Requires minor forend alterations to fit Rem 1100/11-87.
** Requires drilling/tapping receiver to fit M1.
Porta cartucce SURESHELL POLYMER: la scelta ideale per i professionisti
Il porta cartucce SURESHELL POLYMER di MESA TACTICAL PRODUCTS è progettato per coloro che non vogliono compromettere qualità, prestazioni e durata. Questo sistema di porta cartucce in polimero è un'alternativa economica e attraente rispetto ai porta cartucce in plastica di bassa qualità offerti dai concorrenti.
Caratteristiche del prodotto:
- Materiale: Realizzato in polimero resistente agli urti e durevole.
- Configurazione: Disponibile in configurazione da sei cartucce.
- Sistema di montaggio: Include una piastra posteriore in alluminio leggero con inserti filettati in ottone.
- Sistema di frizione: Dotato di un innovativo sistema di frizione in gomma duale che tiene le cartucce in posizione.
- Protezione: Alcuni modelli includono guarnizioni in gomma die-cut per proteggere la finitura del fucile.
- Compatibilità: Sistema di montaggio compatibile con fucili Remington 870, 1100 e 11-87.
Questo sistema tiene le cartucce in posizione fino al momento del bisogno, rendendole facilmente accessibili e rapidamente rimovibili per un ricaricamento veloce. I modelli sono disponibili con e senza rotaie Picatinny integrate per il montaggio di ottiche, e funzionano bene in tutti i climi e ambienti, resistendo all'uso quotidiano e agli abusi a cui sono sottoposti gli armamenti.
Specifiche:
- Iniezione stampata in polimero rinforzato con vetro, piastra posteriore in alluminio leggera, finitura nera opaca.
- Modelli disponibili per calibro 12 solo.
- Tutti i modelli includono hardware di montaggio, guarnizione in gomma e istruzioni per l'installazione.
- Modelli per mano destra solo.
- Il montaggio laterale Remington si adatta ai modelli 870/1100/11-87 (potrebbe richiedere modifiche al fucile).
- Montaggio laterale Rem 6-Round: 6¼” (15.8cm) di lunghezza x 1½” di altezza. Peso: 5.4 oz. (152g).
- Montaggio laterale Rem 8-Round: 7¾” (19.7cm) di lunghezza x 1½” di altezza. Peso: 7 oz. (200g).
- Montaggio Picatinny Remington: 7” (15.8cm) di lunghezza x 2½” (6.3cm) di altezza. Peso: 7.6 oz. (215g).
- Montaggio Mossberg per modelli 500/590: solo 6 cartucce. 6-3/8" (16.2cm) di lunghezza x 1-3/8" (3.5cm) di altezza. Peso: 5.2 oz. (147g).
- Montaggio Benelli per M1/M2/M3: Benelli 6-Round Sidemount – 6” (15.2cm) di lunghezza x 2½” di altezza. Peso: 6.3 oz. (179g).
- Picatinny Benelli disponibile per M2 (richiede perforazione del ricevitore per adattarsi a M1), M4/M1014, e Supernova.
- Benelli M2 6-Round Picatinny – 6” di lunghezza x 2” (5.1cm) di altezza. Peso: 7.4 oz. (210g).
- Benelli M4/M1014 6-Round Picatinny – 6” di lunghezza x 2” (5.1cm) di altezza. Peso: 7.5 oz. (213g).
* Richiede l'uso di un forend più corto su Rem 870. + Richiede modifiche minori al forend per adattarsi a Rem 1100/11-87. ** Richiede perforazione/tapping del ricevitore per adattarsi a M1.