Use With ACRAGLAS~, ACRA-QUICK? or ACRA-20? For Stronger-Than-New Repairs On Cracked/Split Stocks
With this Kit, plus ACRAGLAS and a vari-speed drill, you can do quick, easy, sure-to-hold repair jobs on cracked or broken stocks. Pins go in easily, won't further split the stock; cannot pull or shoot out; can be cut off at any length. Made of "half- hard" brass alloy. 60° flat-top threads for best holding. After broken surfaces are coated with ACRAGLAS and clamped tightly, drill pin hole with drill provided. Coat pin with ACRAGLAS also, and run it into hole with vari-speed drill at slow speed. After cured, cut off and dress ends.
SPECS: 2½" (6.3cm) overall length with 2" (5.1cm) threaded. Kit contains: 12 each of 1/8" (3.2mm) and 3/32" (2.4mm) Stock Repair Pins, plus (1) 1/8" (3.2mm) & (1) 3/32" (2.4mm) jobber length drills.
Altro...
Uso con ACRAGLAS ~, ACRA-QUICK? o ACRA-20? Per le riparazioni più forte rispetto a nuove scorte di cracking/Split
Con questo Kit, oltre a ACRAGLAS e un trapano vari-velocità, si possono fare i lavori di riparazione rapida, facile e sicuro per tenere scorte incrinate o rotte. Perni andare facilmente, non dividere ulteriormente il brodo; non può tirare o sparare fuori; può essere tagliato a qualsiasi lunghezza. Realizzati in lega di ottone "half-hard". discussioni a coperchio piatto di 60° per la migliore tenuta. Dopo aver rotti superfici sono rivestite con ACRAGLAS e fissata saldamente, perno forare con il trapano fornito. Cappotto anche pin con ACRAGLAS ed eseguito nel foro con vari-velocità trapano a bassa velocità. Dopo curato, tagliato e vestire le estremità.
Specifiche: 2½"(6,3 cm) lunghezza complessiva con 2" (5.1 cm) filettato. Kit contiene: 12 di 1/8"(3.2 mm) e 3/32" (2.4 mm) Stock riparazione perni, più (1) 1/8"(3.2 mm) & Trapani (1) 3/32" (2.4 mm) jobber lunghezza.
Altro...
Punteggi dei clienti per BROWNELLS STOCK REPAIR PINS 1/8" 12 PACK
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
Best to have(01/02/2011)
I have been using the pins on broken stocks for years. They are great to use on broken stocks. They keep the broken stocks together when used right.
Outstanding!!(28/12/2009)
I used it to repair a stock that had been badly split. It belonged to a friend who wanted to pass his rifle that his grandfather owned to his son for Christmas. It was a .30-06, and after testing the fix at the range, I was impressed with the strength it added to the stock.
A VERY strong and reliable solution, and very easy to install.
It would be nice to have instructions on how best to install it so that it shows on only one side of the stock. There are many ways you can go with that, but what is the best?
N. prodotto: 080565125 BROWNELLS STOCK REPAIR PINS 1/8" 12 PACK Con questo Kit, oltre a ACRAGLAS e un trapano vari-velocità, si possono fare i lavori di riparazione rapida, facile e sicuro per tenere scorte incrinate o rotte. Perni andare facilmente, non dividere ulteriormente il brodo; non può tirare o sparare fuori; può essere tagliato a qualsiasi lunghezza. Realizzati in lega di ottone "half-hard". discussioni a coperchio piatto di 60° per la migliore tenuta. Dopo aver rotti superfici sono rivestite con ACRAGLAS e fissata saldamente, perno forare con il trapano fornito. Cappotto anche pin con ACRAGLAS ed eseguito nel foro con vari-velocità trapano a bassa velocità. Dopo curato, tagliato e vestire le estremità.
46.9EUR4446,90 €
*
Tempi di consegna circa 14-21 giorni. Più di 10 pz. nel magazzino USA
Peso della spedizione: 0,023kgAltezza: 8mmLarghezza: 69mmLunghezza: 97mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 080565093 BROWNELLS STOCK REPAIR PINS 3/32" 12 PACK Con questo Kit, oltre a ACRAGLAS e un trapano vari-velocità, si possono fare i lavori di riparazione rapida, facile e sicuro per tenere scorte incrinate o rotte. Perni andare facilmente, non dividere ulteriormente il brodo; non può tirare o sparare fuori; può essere tagliato a qualsiasi lunghezza. Realizzati in lega di ottone "half-hard". discussioni a coperchio piatto di 60° per la migliore tenuta. Dopo aver rotti superfici sono rivestite con ACRAGLAS e fissata saldamente, perno forare con il trapano fornito. Cappotto anche pin con ACRAGLAS ed eseguito nel foro con vari-velocità trapano a bassa velocità. Dopo curato, tagliato e vestire le estremità.
48.9EUR2248,90 €
*
Tempi di consegna circa 14-21 giorni. Più di 10 pz. nel magazzino USA
Peso della spedizione: 0,023kgLarghezza: 83mmLunghezza: 146mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 080565000 BROWNELLS STOCK REPAIR PIN KIT050806103474 Con questo Kit, oltre a ACRAGLAS e un trapano vari-velocità, si possono fare i lavori di riparazione rapida, facile e sicuro per tenere scorte incrinate o rotte. Perni andare facilmente, non dividere ulteriormente il brodo; non può tirare o sparare fuori; può essere tagliato a qualsiasi lunghezza. Realizzati in lega di ottone "half-hard". discussioni a coperchio piatto di 60° per la migliore tenuta. Dopo aver rotti superfici sono rivestite con ACRAGLAS e fissata saldamente, perno forare con il trapano fornito. Cappotto anche pin con ACRAGLAS ed eseguito nel foro con vari-velocità trapano a bassa velocità. Dopo curato, tagliato e vestire le estremità.
69.9EUR069,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Use With ACRAGLAS~, ACRA-QUICK? or ACRA-20? For Stronger-Than-New Repairs On Cracked/Split Stocks
With this Kit, plus ACRAGLAS and a vari-speed drill, you can do quick, easy, sure-to-hold repair jobs on cracked or broken stocks. Pins go in easily, won't further split the stock; cannot pull or shoot out; can be cut off at any length. Made of "half- hard" brass alloy. 60° flat-top threads for best holding. After broken surfaces are coated with ACRAGLAS and clamped tightly, drill pin hole with drill provided. Coat pin with ACRAGLAS also, and run it into hole with vari-speed drill at slow speed. After cured, cut off and dress ends.
SPECS: 2½" (6.3cm) overall length with 2" (5.1cm) threaded. Kit contains: 12 each of 1/8" (3.2mm) and 3/32" (2.4mm) Stock Repair Pins, plus (1) 1/8" (3.2mm) & (1) 3/32" (2.4mm) jobber length drills.
Altro...
Uso con ACRAGLAS ~, ACRA-QUICK? o ACRA-20? Per le riparazioni più forte rispetto a nuove scorte di cracking/Split
Con questo Kit, oltre a ACRAGLAS e un trapano vari-velocità, si possono fare i lavori di riparazione rapida, facile e sicuro per tenere scorte incrinate o rotte. Perni andare facilmente, non dividere ulteriormente il brodo; non può tirare o sparare fuori; può essere tagliato a qualsiasi lunghezza. Realizzati in lega di ottone "half-hard". discussioni a coperchio piatto di 60° per la migliore tenuta. Dopo aver rotti superfici sono rivestite con ACRAGLAS e fissata saldamente, perno forare con il trapano fornito. Cappotto anche pin con ACRAGLAS ed eseguito nel foro con vari-velocità trapano a bassa velocità. Dopo curato, tagliato e vestire le estremità.
Specifiche: 2½"(6,3 cm) lunghezza complessiva con 2" (5.1 cm) filettato. Kit contiene: 12 di 1/8"(3.2 mm) e 3/32" (2.4 mm) Stock riparazione perni, più (1) 1/8"(3.2 mm) & Trapani (1) 3/32" (2.4 mm) jobber lunghezza.
Altro...
Punteggi dei clienti per BROWNELLS STOCK REPAIR PINS 1/8" 12 PACK
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
Best to have(01/02/2011)
I have been using the pins on broken stocks for years. They are great to use on broken stocks. They keep the broken stocks together when used right.
Outstanding!!(28/12/2009)
I used it to repair a stock that had been badly split. It belonged to a friend who wanted to pass his rifle that his grandfather owned to his son for Christmas. It was a .30-06, and after testing the fix at the range, I was impressed with the strength it added to the stock.
A VERY strong and reliable solution, and very easy to install.
It would be nice to have instructions on how best to install it so that it shows on only one side of the stock. There are many ways you can go with that, but what is the best?