Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia

EGW
SAKO A-7 LA STEEL ULTIMATE DUTY PICATINNY SCOPE MOUNT

841370113729 296000773
These mounts are a customer overrun and have an integrated recoil lug. This base sits at approximately 0.39"" high and is not recommended for use with quick disconnect rings, due to the valley down the center. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002"". After machining; the mounts are sand blasted. The steel rails are Mil Spec parkerized for a durable rust resistant finish. This mount is only available in 20 MOA -for shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW HD Scope Rings to make it a complete package! Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
159.9 159.9 1 EUR
N. prodotto: 296000773
EGW SAKO A-7 LA 1-PIECE PICATINNY BASE 20 MOA
Parti Fabbricante: 86802 841370113729 Queste basi sono un eccesso di produzione e hanno un fermacolpi integrato. Questa base si posiziona a circa 0,39" di altezza e non è consigliata per l'uso con anelli di sgancio rapido, a causa della valle al centro. Le scanalature Picatinny si estendono per tutta la lunghezza della slitta, offrendo flessibilità al tiratore nel montaggio degli anelli per cannocchiale e altri accessori. Le scanalature sono tarate secondo le specifiche MIL-STD 1913 mantenendo tolleranze di +/-0,002". Dopo la lavorazione, le basi sono sabbiati. Le rotaie in acciaio sono parkerizzate secondo le specifiche militari per una finitura resistente e antiruggine. Questo supporto è disponibile solo con 20 MOA - per tiri da 500 a 1000 yard. Quando si azzerano le armi con un supporto da 20 MOA, EGW raccomanda di azzerare a 200 yard. Compatibile con anelli per cannocchiale Picatinny o Weaver. Aggiungi EGW HD Scope Rings per completare il pacchetto! Installazione: EGW raccomanda 20 inch lbs di coppia e una goccia di loctite blu (loctite è venduto separatamente).
159.9 EUR 0 159,90 € *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Sako Colore: Nero Elevation: 20 MOA Materiale: Acciaio Modello: A7 Numero di basi: 1 pezzo Tipo: Picatinny Rail Tipo di azione: Long

Caratteristiche

Adatto per: Sako Colore: Nero Elevation: 20 MOA Materiale: Acciaio Modello: A7 Numero di basi: 1 pezzo Tipo: Picatinny Rail Tipo azione: Long Peso della spedizione: 0,102kg

Dettagli dell'elemento

Made in Usa



These mounts are a customer overrun and have an integrated recoil lug. This base sits at approximately 0.39"" high and is not recommended for use with quick disconnect rings, due to the valley down the center. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002"". After machining; the mounts are sand blasted. The steel rails are Mil Spec parkerized for a durable rust resistant finish. This mount is only available in 20 MOA -for shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. Compatible with Picatinny or Weaver scope rings. Add EGW HD Scope Rings to make it a complete package! Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Newsletter