Shock-absorbing polyurethane buffer replaces the bolt stop pin to eliminate metal-to-metal contact and extend receiver life. Cushions the bolt’s rearward motion to help prevent receiver cracking, reduce felt recoil, and enable quieter cycling.
SPECS: Polyurethane. Fits 10/22 in .22 LR only. This buffer may be manufactured in various colors but when properly installed it will not be visible.
Altro...
Aiuta a Prolungare la Vita del Ricevitore & Ridurre il Rinculo Avvertito
Il buffer in poliuretano assorbi-urto sostituisce il perno di arresto del carrello per eliminare il contatto metallo-metallo e prolungare la vita del ricevitore. Ammortizza il movimento all'indietro del carrello per aiutare a prevenire la rottura del ricevitore, ridurre il rinculo avvertito e consentire un ciclo di sparo più silenzioso.
SPECS: Poliuretano. Adatto solo per 10/22 in calibro .22 LR. Questo buffer può essere prodotto in vari colori ma, una volta installato correttamente, non sarà visibile.
Altro...
Punteggi dei clienti per TACTICAL SOLUTIONS, LLC 10/22 SHOCK BUFFER
Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 2,6
Good product.(29/11/2011)
Easy to install and works as described.
Poor Quality Control, Uneven Ends(21/12/2011)
The buffer provided looks nothing like the picture and is jet black, it is cut too short and at an angle on one end. Really poor quality control... it will probalby do the job but will look unfitted.
Works Okay(08/05/2012)
There's no rocket science going into this part. I can't really tell if it reduces felt recoil (and doubt that it does) but it makes sense that it would extend the life of the receiver and bolt. For this price, I don't see how this can be a bad thing.
TacSol should be embarrassed(03/06/2012)
Like the other reviewer said, a filmsy plastic tubing, poorly cut. I think the packaging costs more than the product itself. Anyone could go to a hardware store and buy a roll of cheap plastic tubing and cut it to size, which is what it looks like they did.
I would send it back, but shipping will cost more than the part itself.
DO NOT BUY!
bought two bad mistake(01/11/2012)
buffer pins are not straight ends sheared off and not perpindicular also too short
Waste of money(16/01/2013)
Quality was poor, ends not cut straight and cylinder was slighty disformed. Item fits snugly but will not go all the way through. Even added a drop of breakfree and did not help. Using the slightest hand pressure exerted to make it flush, the end will mushroom. Buy at your own risk...
Easy install(16/10/2016)
The one I received was a better fit than the factory installed seel buffer that fell out once receiver was removed from stock. Well made good fit.
run away(22/01/2018)
I love most all of Tactical Solutions products but not this one.
too difficult to install(02/02/2018)
may work for the intended purpose, but way too difficult to install. they will never go back in when I remove them to remove bolt.
N. prodotto: 100006001 TACTICAL SOLUTIONS, LLC 10/22 SHOCK BUFFER Parti Fabbricante: XRACCBF879971001961 Il buffer in poliuretano assorbi-urto sostituisce il perno di arresto del carrello per eliminare il contatto metallo-metallo e prolungare la vita del ricevitore. Ammortizza il movimento all'indietro del carrello per aiutare a prevenire la rottura del ricevitore, ridurre il rinculo avvertito e consentire un ciclo di sparo più silenzioso.
13.9EUR1313,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
Adatto per:
Ruger
Modello:
10/22
Peso della spedizione: 0,005kgAltezza di spedizione: 33mmLarghezza di spedizione: 69mmLunghezza di spedizione: 89mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Shock-absorbing polyurethane buffer replaces the bolt stop pin to eliminate metal-to-metal contact and extend receiver life. Cushions the bolt’s rearward motion to help prevent receiver cracking, reduce felt recoil, and enable quieter cycling.
SPECS: Polyurethane. Fits 10/22 in .22 LR only. This buffer may be manufactured in various colors but when properly installed it will not be visible.
Altro...
Aiuta a Prolungare la Vita del Ricevitore & Ridurre il Rinculo Avvertito
Il buffer in poliuretano assorbi-urto sostituisce il perno di arresto del carrello per eliminare il contatto metallo-metallo e prolungare la vita del ricevitore. Ammortizza il movimento all'indietro del carrello per aiutare a prevenire la rottura del ricevitore, ridurre il rinculo avvertito e consentire un ciclo di sparo più silenzioso.
SPECS: Poliuretano. Adatto solo per 10/22 in calibro .22 LR. Questo buffer può essere prodotto in vari colori ma, una volta installato correttamente, non sarà visibile.
Altro...
Punteggi dei clienti per TACTICAL SOLUTIONS, LLC 10/22 SHOCK BUFFER
Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 2,6
Good product.(29/11/2011)
Easy to install and works as described.
Poor Quality Control, Uneven Ends(21/12/2011)
The buffer provided looks nothing like the picture and is jet black, it is cut too short and at an angle on one end. Really poor quality control... it will probalby do the job but will look unfitted.
Works Okay(08/05/2012)
There's no rocket science going into this part. I can't really tell if it reduces felt recoil (and doubt that it does) but it makes sense that it would extend the life of the receiver and bolt. For this price, I don't see how this can be a bad thing.
TacSol should be embarrassed(03/06/2012)
Like the other reviewer said, a filmsy plastic tubing, poorly cut. I think the packaging costs more than the product itself. Anyone could go to a hardware store and buy a roll of cheap plastic tubing and cut it to size, which is what it looks like they did.
I would send it back, but shipping will cost more than the part itself.
DO NOT BUY!
bought two bad mistake(01/11/2012)
buffer pins are not straight ends sheared off and not perpindicular also too short
Waste of money(16/01/2013)
Quality was poor, ends not cut straight and cylinder was slighty disformed. Item fits snugly but will not go all the way through. Even added a drop of breakfree and did not help. Using the slightest hand pressure exerted to make it flush, the end will mushroom. Buy at your own risk...
Easy install(16/10/2016)
The one I received was a better fit than the factory installed seel buffer that fell out once receiver was removed from stock. Well made good fit.
run away(22/01/2018)
I love most all of Tactical Solutions products but not this one.
too difficult to install(02/02/2018)
may work for the intended purpose, but way too difficult to install. they will never go back in when I remove them to remove bolt.