Caratteristiche
- Colore: Nero
- Finitura: Nero
- Materiale: Rubber
- Tipo di arma: Universal Rifles
- Peso della spedizione: 0,077kg
- Altezza di spedizione: 10mm
- Larghezza di spedizione: 155mm
- Lunghezza di spedizione: 168mm
- UPC: 730412000526
N. prodotto: 440703316
N. fab.: 703-316
730412000526 Stacca e attacca a qualsiasi poggiatesta e metti fine alla sensazione di dolore e affaticamento il giorno dopo il tiro. Gomma assorbente di rinculo Sorbothane® autentica, pretagliata con un retro adesivo per un'installazione rapida su fucili o carabine a forte rinculo. Tre spessori consentono rapidi aggiustamenti dell'altezza del poggiatesta.Il RIFLE CHEEK-EEZ di KICK-EEZ è la soluzione ideale per chi desidera attenuare il rinculo e prevenire lividi al viso durante le sessioni di tiro. Questo prodotto innovativo è progettato per essere facilmente applicato a qualsiasi cheekpiece.
Applicalo semplicemente e metti fine alla sensazione di affaticamento e dolore il giorno dopo una giornata di tiro. Realizzato in Sorbothane®, un gomma assorbente degli urti, il CHEEK-EEZ è pre-tagliato con una parte adesiva per un'installazione rapida su fucili e carabine a forte rinculo.
Non lasciare che il rinculo rovini la tua esperienza di tiro. Scegli RIFLE CHEEK-EEZ e migliora il tuo comfort!
Simple, effective solution 12/01/2015
Installed my first one on a MagPul PRS-G3 adjustable, tactical stock. Very simple to lay on and then razor trim to fit as I liked it. Softens the cold hardness of the cheek piece, and blends in exceptionally well. 2nd one placed on a Command Arms A-2 buttstock with similar ease and good fit/appearance. We'll add longevity comments in a few months.
Must Have... 11/10/2013
I use the Kick-Ezz pads on all my rifles with scopes and cannot get along without 'em.
The 1/16" thick pad was ordered for a 2.5-10 Nikon scoped AR-15 using a shorter A1 stock. I carefully trimmed 1/2" off the forward portion of the pad which gave it a cleaner look on the shorter stock.
To determine the location for the pad on an AR-15 you'll need to fully extend the charge handle and place a mark on the stock plus 1/8 inch otherwise the charge handle will contact the pad.
I also recommend placing a centerline on the pad so to align it with the faint mold line that generally runs down the center of AR stocks. The adhesive on the pads is indeed sticky so knowing where to position it is very important.
Align the pad to the center marks, press lightly and gradually lower the sides into position. Do not stretch the pad or allow it to kink.
My scope has a 4" eye relief and is mounted using a cantilever mount which gave a comfortable cheek weld.
Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.