Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia

APEX TACTICAL SPECIALTIES INC
RED M&P SHIELD ACTION ENHANCEMENT TRIGGER

856008005598 100017521
The Shield Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a red anodized, solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%.  It features a smooth face with a center mounted pivoting safety that maintains factory safety values.  The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face. The Apex Shield Duty/Carry Kit was designed to provide the M&P Shield pistol owner a smooth, consistent trigger pull that is approximately 2 lbs lighter(based on variations in factory tolerances) with the advantages of shorter over-travel and more detectable trigger reset.  The kit itself is engineered to be drop-in and should not require further gunsmithing.  However, Armorer or gunsmith installation of the Ultimate Striker Block into the Shield slide is strongly recommended. The Shield Action Enhancement Trigger Only is perfect for use with the M&P Shield already equipped with the apex Shield Duty/Carry Kit.  Works with all Smith & Wesson M&P Shield pistols in 9mm and .40 calibers, does not work in the Shield 45.  

SPECS: Kit includes:  Red Anodized Aluminum Shield Action Enhancement Trigger, Shield Duty/Carry Kit(Fully machined sear, Ultimate Striker Block, Striker Block Spring, Sear Spring(1/8"), 4lb rated Trigger Return Spring, Trigger Return Spring Installation Shield Slave Pin, Talon Tactical Tool). Trigger Only includes:  Red Anodiezed Aluminum Shield Action Enhancement Trigger, Shield Trigger Return Spring Installation Slave Pin.
 

284.9 284.9 2 EUR
N. prodotto: 100017521
APEX TACTICAL SPECIALTIES INC RED M&P SHIELD ACTION ENHANCEMENT TRIGGER ONLY
Parti Fabbricante: 100-057 856008005598 Il kit Shield Action Enhancement Trigger sostituisce direttamente il grilletto a cerniera di fabbrica con un corpo di grilletto solido in alluminio anodizzato rosso che riduce il pre-viaggio e il post-viaggio di circa il 20%. È caratterizzato da una superficie liscia con una sicurezza pivotante montata al centro che mantiene i valori di sicurezza di fabbrica. La barra di sicurezza pivotante montata al centro impedisce l'attivazione involontaria creando un blocco del grilletto che non si disimpegna a meno che il tiratore non posizioni direttamente il dito sulla faccia del grilletto. Il kit Apex Shield Duty/Carry è stato progettato per fornire al proprietario della pistola M&P Shield una trazione del grilletto liscia e consistente che è approssimativamente 2 libbre più leggera (in base alle variazioni delle tolleranze di fabbrica) con i vantaggi di un post-viaggio più corto e un reset del grilletto più percepibile. Il kit è progettato per essere drop-in e non dovrebbe richiedere ulteriori lavori di armaiolo. Tuttavia, si raccomanda vivamente l'installazione dell'Ultimate Striker Block nello scivolo della Shield da parte di un armaiolo o di un gunsmith. Il solo Shield Action Enhancement Trigger è perfetto per l'uso con la M&P Shield già dotata del kit Apex Shield Duty/Carry. Funziona con tutte le pistole Smith & Wesson M&P Shield in calibri 9mm e .40, non è compatibile con la Shield 45.
Avvisa quando diventa disponibile
Non disponibile.
Caratteristiche: Adatto per: Smith & Wesson Finitura: Red Modello: M&P Shield

Caratteristiche

Adatto per: Smith & Wesson Finitura: Red Modello: M&P Shield Peso della spedizione: 0,018kg Altezza di spedizione: 20mm Larghezza di spedizione: 74mm Lunghezza di spedizione: 137mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c



N. prodotto: 100017520
APEX TACTICAL SPECIALTIES INC RED M&P SHIELD ACTION ENHANCEMENT TRIGGER KIT
Parti Fabbricante: 100-056 856008005581 Il kit Shield Action Enhancement Trigger sostituisce direttamente il grilletto a cerniera di fabbrica con un corpo di grilletto solido in alluminio anodizzato rosso che riduce il pre-viaggio e il post-viaggio di circa il 20%. È caratterizzato da una superficie liscia con una sicurezza pivotante montata al centro che mantiene i valori di sicurezza di fabbrica. La barra di sicurezza pivotante montata al centro impedisce l'attivazione involontaria creando un blocco del grilletto che non si disimpegna a meno che il tiratore non posizioni direttamente il dito sulla faccia del grilletto. Il kit Apex Shield Duty/Carry è stato progettato per fornire al proprietario della pistola M&P Shield una trazione del grilletto liscia e consistente che è approssimativamente 2 libbre più leggera (in base alle variazioni delle tolleranze di fabbrica) con i vantaggi di un post-viaggio più corto e un reset del grilletto più percepibile. Il kit è progettato per essere drop-in e non dovrebbe richiedere ulteriori lavori di armaiolo. Tuttavia, si raccomanda vivamente l'installazione dell'Ultimate Striker Block nello scivolo della Shield da parte di un armaiolo o di un gunsmith. Il solo Shield Action Enhancement Trigger è perfetto per l'uso con la M&P Shield già dotata del kit Apex Shield Duty/Carry. Funziona con tutte le pistole Smith & Wesson M&P Shield in calibri 9mm e .40, non è compatibile con la Shield 45.
284.9 EUR 4 284,90 € *
Tempi di consegna circa 12-16 giorni.
4 pz. nel magazzino USA
Caratteristiche: Adatto per: Smith & Wesson Finitura: Red Modello: M&P Shield
The Shield Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a red anodized, solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%.  It features a smooth face with a center mounted pivoting safety that maintains factory safety values.  The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face. The Apex Shield Duty/Carry Kit was designed to provide the M&P Shield pistol owner a smooth, consistent trigger pull that is approximately 2 lbs lighter(based on variations in factory tolerances) with the advantages of shorter over-travel and more detectable trigger reset.  The kit itself is engineered to be drop-in and should not require further gunsmithing.  However, Armorer or gunsmith installation of the Ultimate Striker Block into the Shield slide is strongly recommended. The Shield Action Enhancement Trigger Only is perfect for use with the M&P Shield already equipped with the apex Shield Duty/Carry Kit.  Works with all Smith & Wesson M&P Shield pistols in 9mm and .40 calibers, does not work in the Shield 45.  

SPECS: Kit includes:  Red Anodized Aluminum Shield Action Enhancement Trigger, Shield Duty/Carry Kit(Fully machined sear, Ultimate Striker Block, Striker Block Spring, Sear Spring(1/8"), 4lb rated Trigger Return Spring, Trigger Return Spring Installation Shield Slave Pin, Talon Tactical Tool). Trigger Only includes:  Red Anodiezed Aluminum Shield Action Enhancement Trigger, Shield Trigger Return Spring Installation Slave Pin.
 

Newsletter