Handy kit contains all the parts you need to mount a new mainspring housing on your 1911, or reburish the internal components to factory-new condition. Includes standard, factory weight (23 lb.) hammer spring to help ensure positive ignition and restore your pistol s reliability by replacing an old, weak spring. Also includes mainspring cap, cap pin, and retaining pin, so you don t ruin a good-looking new housing s appearance with old, dinged hardware. Kit available with blued or stainless external components to match your pistol s finish. Installation instructions included.
SPECS: Kit contains factory weight hammer spring, mainspring cap, cap pin, mainspring housing retainer pin, and instructions. Fits full-size 1911 Government Model, Commander, and clones.
Altro...
Aiuta a mantenere la vostra pistola in esecuzione in modo affidabile
Pratico kit contiene tutti i pezzi che necessari per montare un nuovo alloggiamento della molla principale sul tuo 1911, o reburish i componenti interni alla condizione di fabbrica nuova. Include molla di martello del peso (23 lb.) fabbrica standard, per contribuire a garantire ad accensione comandata e ripristinare l'affidabilità di s pistola sostituendo una vecchia, debole molla. Include tappo a molla, perno tappo e perno di ritegno, don aspetto di rovina un bell'aspetto nuovo alloggiamento s t con hardware vecchio, dinged. Kit disponibili con componenti esterne azzurrate o inossidabile per abbinare la vostra pistola s finitura. Istruzioni per l'installazione incluse.
Specifiche: Kit contiene primavera di fabbrica peso martello, perno tappo, tappo molla principale movente principale ospita il perno di fermo e le istruzioni. Modello di governo si inserisce 1911 Full-size, comandante e cloni.
Altro...
Punteggi dei clienti per BROWNELLS 1911 MAINSPRING HOUSING REBUILD KIT BLUED
Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 5
SA mil spec and ed brown flat ms housing(15/04/2012)
Bought this and the ed brown flat mainspring housing to replace the ILS housing on the back of my SA mil spec. the parts are perfect, no flaws. FYI this kit is not needed if wanting to change out the ILS housing with something else, you can use the stock parts provided in the SA ILS housing with another housing... but these parts are nice and are a welcome upgrade. Make sure you wear safety glasses while messing with your MS housing, especially if you're not using a bench vise!!
1911 Mainspring Housing rebuild kit(23/06/2018)
I recently purchased three of the SS spring sets for my SA 1911-A1 in 9mm and 45 ACP plus my older Ruger 1911 45 ACP. I installed the spring kits in new Ed Brown arched mainspring housings. The ones with the vertical grooves. What a difference. The arched grip feels so much more comfortable over a flat housing design. Plus the bottom of the frame / grip no longer digs into the palm of my hand. I was contemplating doing a "Bobtail" on each of my pistols but this was a much easier and cheaper solution with great results. The spring kit is everything you need to rebuild a mainspring housing. As a kit the overall price is cheaper than purchasing each component on their own. Good product and a great price. Thanks Brownells.
It's perfect(24/08/2010)
Drops right in to your mainspring housing if you need to replace the spring, pins, all the internals. Handy if you want to delete any safety lock mechanisms that are associated with the MSH like the Springfield Armory ILS.
The spring is a 23# (the spec rating) Wolff Spring
Very helpful, complete kit.(25/03/2011)
Used in conjunction with a new Springfield Armory 20 LPI Flat Mainspring Housing without ILS. Replaced the Arched ILS Mainspring Housing/ Mainspring hardware that came with my SA 1911-A1 GI Model.
Kit allowed me to rid the gun of this silly "safety" feature, and get that classic slim look and feel that 1911's were meant to have. Parts were well-packaged, well-labeled, and the mainspring is a Wolff 23 lb'er. Easy 4 minute install with common hand tools and a little patience. Hammer fall and trigger pull are slightly more crisp, and I now have full confidence in the parts in the Mainspring housing area.
Very good kit(09/04/2011)
I like it, comes with every thing you need to replace your factory set up. This is a good replacement for pistols equipped with the ISL in the mainspring housing. This kit gets the job done.
Great.(10/04/2011)
Got this with my new mainspring housing/magwell. Works and fits great.
Perfect(07/03/2013)
Great little kit. Just drop it in and go. Perfect.
Springfield Owners: This will work with the Springfield ILS,and includes a mainspring cap, which Springfield's don't have, so if you change out to an Ed Brown or S&A magwell, this makes it super easy.
Easy ILS replacement(24/02/2014)
Bought this to replace ILS internals when replacing MSH for a magwell setup on a Springer Loaded. Easy to install with a little patience in installing housing pin. Used 18 lb hammer spring instead of the factory 23 lb spring which was included. Nice kit and handy to have on handif you own several 1911s.
Great all-around kit!(17/06/2014)
These parts fit wonderfully in my newly purchased Ed Brown Blank MSH! What is great about this kit is that they didn't just take parts from "no name" manufacturers; they took some of the best parts they could find and combined them into one package! The mainspring was a little stiff at first but, after cocking the hammer about 50 times, it loosened up. The only real con I can give about this kit is that it is a little tricky to install without a vice (Had to have another person hold the mainspring down while I installed the pin). But, I'm not going to deduct a star because of that. Overall, this is a great kit for those who are either buying a new MSH or just want to replace worn parts.
SUPERB Quality(01/08/2017)
I used this mainspring build kit to build up a Ruger flat mainspring housing. I have to say I was much more than just pleased by the parts that were included. Everything fit perfectly and effortlessly into the MS housing and works great. While the pins are all high quality and came in Brownells labeled bags, the mainspring itself is (at least in my kit and another reviewerâs) a Wolf spring.
All the parts you may lose (04/09/2018)
A nice kit to rebuild or replace lost parts of the 1911 Main Spring Housing. I had to build a lanyard loop housing for my Walther Colt 22LR 1911. Rail Gun and this kit has all the parts
N. prodotto: 080000549 BROWNELLS 1911 MAINSPRING HOUSING REBUILD KIT BLUED Pratico kit contiene tutti i pezzi che necessari per montare un nuovo alloggiamento della molla principale sul tuo 1911, o reburish i componenti interni alla condizione di fabbrica nuova. Include molla di martello del peso (23 lb.) fabbrica standard, per contribuire a garantire ad accensione comandata e ripristinare l'affidabilità di s pistola sostituendo una vecchia, debole molla. Include tappo a molla, perno tappo e perno di ritegno, don aspetto di rovina un bell'aspetto nuovo alloggiamento s t con hardware vecchio, dinged. Kit disponibili con componenti esterne azzurrate o inossidabile per abbinare la vostra pistola s finitura. Istruzioni per l'installazione incluse.
21.9EUR021,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Adatto per:
1911
Peso della spedizione: 0,023kgAltezza: 8mmLarghezza: 109mmLunghezza: 198mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 080000550 BROWNELLS 1911 MAINSPRING HOUSING REBUILD KIT STAINLESS Pratico kit contiene tutti i pezzi che necessari per montare un nuovo alloggiamento della molla principale sul tuo 1911, o reburish i componenti interni alla condizione di fabbrica nuova. Include molla di martello del peso (23 lb.) fabbrica standard, per contribuire a garantire ad accensione comandata e ripristinare l'affidabilità di s pistola sostituendo una vecchia, debole molla. Include tappo a molla, perno tappo e perno di ritegno, don aspetto di rovina un bell'aspetto nuovo alloggiamento s t con hardware vecchio, dinged. Kit disponibili con componenti esterne azzurrate o inossidabile per abbinare la vostra pistola s finitura. Istruzioni per l'installazione incluse.
25.9EUR325,90 €
*
Tempi di consegna circa 12-16 giorni. 3 pz. nel magazzino USA
Handy kit contains all the parts you need to mount a new mainspring housing on your 1911, or reburish the internal components to factory-new condition. Includes standard, factory weight (23 lb.) hammer spring to help ensure positive ignition and restore your pistol s reliability by replacing an old, weak spring. Also includes mainspring cap, cap pin, and retaining pin, so you don t ruin a good-looking new housing s appearance with old, dinged hardware. Kit available with blued or stainless external components to match your pistol s finish. Installation instructions included.
SPECS: Kit contains factory weight hammer spring, mainspring cap, cap pin, mainspring housing retainer pin, and instructions. Fits full-size 1911 Government Model, Commander, and clones.
Altro...
Aiuta a mantenere la vostra pistola in esecuzione in modo affidabile
Pratico kit contiene tutti i pezzi che necessari per montare un nuovo alloggiamento della molla principale sul tuo 1911, o reburish i componenti interni alla condizione di fabbrica nuova. Include molla di martello del peso (23 lb.) fabbrica standard, per contribuire a garantire ad accensione comandata e ripristinare l'affidabilità di s pistola sostituendo una vecchia, debole molla. Include tappo a molla, perno tappo e perno di ritegno, don aspetto di rovina un bell'aspetto nuovo alloggiamento s t con hardware vecchio, dinged. Kit disponibili con componenti esterne azzurrate o inossidabile per abbinare la vostra pistola s finitura. Istruzioni per l'installazione incluse.
Specifiche: Kit contiene primavera di fabbrica peso martello, perno tappo, tappo molla principale movente principale ospita il perno di fermo e le istruzioni. Modello di governo si inserisce 1911 Full-size, comandante e cloni.
Altro...
Punteggi dei clienti per BROWNELLS 1911 MAINSPRING HOUSING REBUILD KIT BLUED
Numero di punteggi: 11
Da brownells.com: 11
Punteggio medio: 5
SA mil spec and ed brown flat ms housing(15/04/2012)
Bought this and the ed brown flat mainspring housing to replace the ILS housing on the back of my SA mil spec. the parts are perfect, no flaws. FYI this kit is not needed if wanting to change out the ILS housing with something else, you can use the stock parts provided in the SA ILS housing with another housing... but these parts are nice and are a welcome upgrade. Make sure you wear safety glasses while messing with your MS housing, especially if you're not using a bench vise!!
1911 Mainspring Housing rebuild kit(23/06/2018)
I recently purchased three of the SS spring sets for my SA 1911-A1 in 9mm and 45 ACP plus my older Ruger 1911 45 ACP. I installed the spring kits in new Ed Brown arched mainspring housings. The ones with the vertical grooves. What a difference. The arched grip feels so much more comfortable over a flat housing design. Plus the bottom of the frame / grip no longer digs into the palm of my hand. I was contemplating doing a "Bobtail" on each of my pistols but this was a much easier and cheaper solution with great results. The spring kit is everything you need to rebuild a mainspring housing. As a kit the overall price is cheaper than purchasing each component on their own. Good product and a great price. Thanks Brownells.
It's perfect(24/08/2010)
Drops right in to your mainspring housing if you need to replace the spring, pins, all the internals. Handy if you want to delete any safety lock mechanisms that are associated with the MSH like the Springfield Armory ILS.
The spring is a 23# (the spec rating) Wolff Spring
Very helpful, complete kit.(25/03/2011)
Used in conjunction with a new Springfield Armory 20 LPI Flat Mainspring Housing without ILS. Replaced the Arched ILS Mainspring Housing/ Mainspring hardware that came with my SA 1911-A1 GI Model.
Kit allowed me to rid the gun of this silly "safety" feature, and get that classic slim look and feel that 1911's were meant to have. Parts were well-packaged, well-labeled, and the mainspring is a Wolff 23 lb'er. Easy 4 minute install with common hand tools and a little patience. Hammer fall and trigger pull are slightly more crisp, and I now have full confidence in the parts in the Mainspring housing area.
Very good kit(09/04/2011)
I like it, comes with every thing you need to replace your factory set up. This is a good replacement for pistols equipped with the ISL in the mainspring housing. This kit gets the job done.
Great.(10/04/2011)
Got this with my new mainspring housing/magwell. Works and fits great.
Perfect(07/03/2013)
Great little kit. Just drop it in and go. Perfect.
Springfield Owners: This will work with the Springfield ILS,and includes a mainspring cap, which Springfield's don't have, so if you change out to an Ed Brown or S&A magwell, this makes it super easy.
Easy ILS replacement(24/02/2014)
Bought this to replace ILS internals when replacing MSH for a magwell setup on a Springer Loaded. Easy to install with a little patience in installing housing pin. Used 18 lb hammer spring instead of the factory 23 lb spring which was included. Nice kit and handy to have on handif you own several 1911s.
Great all-around kit!(17/06/2014)
These parts fit wonderfully in my newly purchased Ed Brown Blank MSH! What is great about this kit is that they didn't just take parts from "no name" manufacturers; they took some of the best parts they could find and combined them into one package! The mainspring was a little stiff at first but, after cocking the hammer about 50 times, it loosened up. The only real con I can give about this kit is that it is a little tricky to install without a vice (Had to have another person hold the mainspring down while I installed the pin). But, I'm not going to deduct a star because of that. Overall, this is a great kit for those who are either buying a new MSH or just want to replace worn parts.
SUPERB Quality(01/08/2017)
I used this mainspring build kit to build up a Ruger flat mainspring housing. I have to say I was much more than just pleased by the parts that were included. Everything fit perfectly and effortlessly into the MS housing and works great. While the pins are all high quality and came in Brownells labeled bags, the mainspring itself is (at least in my kit and another reviewerâs) a Wolf spring.
All the parts you may lose (04/09/2018)
A nice kit to rebuild or replace lost parts of the 1911 Main Spring Housing. I had to build a lanyard loop housing for my Walther Colt 22LR 1911. Rail Gun and this kit has all the parts