Installs Easily; Choose Your Sling Position On Collapsible Stocks; Made In The U.S.A.
No gunsmithing required, extra heavy-duty ambidextrous sling swivel mount simply clamps onto the buffer tube. Includes 1¼", mil-spec., push-button, quick-detach sling swivel that can be mounted on either side or the center of the adapter body. Fits adjustable M4-type buttstocks Hard coat anodized, 6061 aluminum body with a matte black finish is built to take extreme duty use without failure. Won t interfere with the operation of stock. Makes an excellent choice for adding an easy quick-release feature to any single-point, two-point, or three-point tactical sling. Made in the USA.
SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required.
Altro...
Facile da installare; Scegli la posizione della cinghia su calci telescopici; Prodotto negli Stati Uniti d'America.
Non richiede l'intervento di un armaiolo, supporto per cinghia ambidestro extra resistente che si fissa semplicemente al tubo di buffer. Include una staffa girevole a sgancio rapido mil-spec da 1¼", con pulsante, che può essere montata su entrambi i lati o al centro del corpo dell'adattatore. Adatto per calci regolabili di tipo M4. Corpo in alluminio 6061 anodizzato duro con finitura nera opaca, costruito per sopportare un uso estremo senza guasti. Non interferisce con il funzionamento del calcio. Rappresenta un'ottima scelta per aggiungere una funzione di sgancio rapido a qualsiasi cinghia tattica monopunto, bipunto o tripunto. Prodotto negli USA.
SPECIFICHE: Alluminio 6061, anodizzato duro, colore nero opaco. Adatto per calcio telescopico a 4 o 6 posizioni. Non richiede l'intervento di un armaiolo.
Altro...
Punteggi dei clienti per MIDWEST INDUSTRIES MCTAR-30HD SLING ADAPTER
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 3,8
Definitely buy again.(24/01/2010)
Easy install and heavy duty. Used hunting and target shooting.
A good sling holder(12/04/2011)
I like that the sling adapter came with extra screws. The screws are small and easily lost so by adding twice as many as needed, MI was thinking about the customster. THe sling adapter did not fit flush with my M-4 but it's very close and secure. If it was flush I would have given 5 stars. I am proud of this purchase and will not need a new adapter
A great product but...(17/07/2011)
This is a simple and good quality product, but is obviously designed for a different stock/buffer tube than mine. The locator pin lug is too long to but into the stock nut, I will cut off the 1/2" lug so it is flush fitting. It is also 2/100 of an inch oversize for the buffer tube, but there is a ridge. which I will grind off to fit. I can't help but think that this has been designed back to front. On the positive is the three point quick attachment points for the swivel.
Adapter has to be milled down to fit!(21/02/2014)
I had to mill off 1/8 inch from the lug that protrudes out at the bottom. Also had to mill more out of the slot where buffer tube is, to make this thing fit the Colt LE6920MP-B. AFTER all the milling it now fits excellent.
N. prodotto: 100002876 MIDWEST INDUSTRIES MCTAR-30HD SLING ADAPTER Parti Fabbricante: MCTAR30HD816537010319 Non richiede l'intervento di un armaiolo, supporto per cinghia ambidestro extra resistente che si fissa semplicemente al tubo di buffer. Include una staffa girevole a sgancio rapido mil-spec da 1¼", con pulsante, che può essere montata su entrambi i lati o al centro del corpo dell'adattatore. Adatto per calci regolabili di tipo M4. Corpo in alluminio 6061 anodizzato duro con finitura nera opaca, costruito per sopportare un uso estremo senza guasti. Non interferisce con il funzionamento del calcio. Rappresenta un'ottima scelta per aggiungere una funzione di sgancio rapido a qualsiasi cinghia tattica monopunto, bipunto o tripunto. Prodotto negli USA.
104.9EUR9104,90 €
*
Tempi di consegna circa 12-16 giorni. 9 pz. nel magazzino USA
Installs Easily; Choose Your Sling Position On Collapsible Stocks; Made In The U.S.A.
No gunsmithing required, extra heavy-duty ambidextrous sling swivel mount simply clamps onto the buffer tube. Includes 1¼", mil-spec., push-button, quick-detach sling swivel that can be mounted on either side or the center of the adapter body. Fits adjustable M4-type buttstocks Hard coat anodized, 6061 aluminum body with a matte black finish is built to take extreme duty use without failure. Won t interfere with the operation of stock. Makes an excellent choice for adding an easy quick-release feature to any single-point, two-point, or three-point tactical sling. Made in the USA.
SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required.
Altro...
Facile da installare; Scegli la posizione della cinghia su calci telescopici; Prodotto negli Stati Uniti d'America.
Non richiede l'intervento di un armaiolo, supporto per cinghia ambidestro extra resistente che si fissa semplicemente al tubo di buffer. Include una staffa girevole a sgancio rapido mil-spec da 1¼", con pulsante, che può essere montata su entrambi i lati o al centro del corpo dell'adattatore. Adatto per calci regolabili di tipo M4. Corpo in alluminio 6061 anodizzato duro con finitura nera opaca, costruito per sopportare un uso estremo senza guasti. Non interferisce con il funzionamento del calcio. Rappresenta un'ottima scelta per aggiungere una funzione di sgancio rapido a qualsiasi cinghia tattica monopunto, bipunto o tripunto. Prodotto negli USA.
SPECIFICHE: Alluminio 6061, anodizzato duro, colore nero opaco. Adatto per calcio telescopico a 4 o 6 posizioni. Non richiede l'intervento di un armaiolo.
Altro...
Punteggi dei clienti per MIDWEST INDUSTRIES MCTAR-30HD SLING ADAPTER
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 3,8
Definitely buy again.(24/01/2010)
Easy install and heavy duty. Used hunting and target shooting.
A good sling holder(12/04/2011)
I like that the sling adapter came with extra screws. The screws are small and easily lost so by adding twice as many as needed, MI was thinking about the customster. THe sling adapter did not fit flush with my M-4 but it's very close and secure. If it was flush I would have given 5 stars. I am proud of this purchase and will not need a new adapter
A great product but...(17/07/2011)
This is a simple and good quality product, but is obviously designed for a different stock/buffer tube than mine. The locator pin lug is too long to but into the stock nut, I will cut off the 1/2" lug so it is flush fitting. It is also 2/100 of an inch oversize for the buffer tube, but there is a ridge. which I will grind off to fit. I can't help but think that this has been designed back to front. On the positive is the three point quick attachment points for the swivel.
Adapter has to be milled down to fit!(21/02/2014)
I had to mill off 1/8 inch from the lug that protrudes out at the bottom. Also had to mill more out of the slot where buffer tube is, to make this thing fit the Colt LE6920MP-B. AFTER all the milling it now fits excellent.