Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope.
Supporto interamente lavorato in acciaio indurito con montaggio a tre punti, fornisce una base stabile e sicura per il montaggio di ottiche con grande obiettivo. Si fissa facilmente alla scanalatura della guida del caricatore e al perno di montaggio del ricevitore senza modifiche al fucile. Una robusta vite di bloccaggio anteriore assicura una stabilità solida come la roccia all'anello del ricevitore. Il canale di mira consente l'uso di mirini di ferro di riserva senza rimuovere l'ottica.
SPECS: Acciaio 4140, nero, finitura al nitrurato. Indurito a Rc 60-62. Lunghezza 5.38" (13.6cm). Altezza 1.875" (4.7cm). Peso 10.9 oz (310 g).
Altro...
Punteggi dei clienti per SMITH ENTERPRISE M14 SCOPE MOUNT
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3,3
Should have bought a Sadlak.(14/11/2010)
I've been trying to get this mount to work for over 3 yrs. Shoots 20" high with MK IV scope adjusted to full down limit (that's 45 minutes down from mechanical center). Tried different rings (Smith, Burris Signature), adding shims between rings and mount, raising front of mount with forward setscrew. Shoots groups under 1" @ 100yds when installed per instructions with Smith rings, but 20" high. Shot like a shotgun (6" groups) with other attempts to lower point of impact. Mount manufacturer said SA, NM, M1A not manufactured to tolerance. It groups under an inch! Should have bought a Sadlak.
One of the Best Mounts for M1A/M14(16/12/2010)
This is a good Mount. A little more difficult to install than a regular mount like bolt guns but this is due to the nature of the M14. Sadlak and Smith Enterprise are very much alike if not exactly. The Mounts are manufactured to G.I. receiver specs. I have installed these on many M14's in Iraq. But some Springfield's Receivers are not to G.I. specs. You can send the rifle to Smith Enterprise or another competent gunsmith who is good with these style of rifles. I would recommend this mount wholeheartedly. I've never had problems with it that could not be overcame.
Rock Solid(09/08/2012)
Great mount, not the easiest to install but well worth the time and money. Before trying to put it on - Read the instructions!
N. prodotto: 851000001 SMITH ENTERPRISE M14 SCOPE MOUNT Parti Fabbricante: 2006 Supporto interamente lavorato in acciaio indurito con montaggio a tre punti, fornisce una base stabile e sicura per il montaggio di ottiche con grande obiettivo. Si fissa facilmente alla scanalatura della guida del caricatore e al perno di montaggio del ricevitore senza modifiche al fucile. Una robusta vite di bloccaggio anteriore assicura una stabilità solida come la roccia all'anello del ricevitore. Il canale di mira consente l'uso di mirini di ferro di riserva senza rimuovere l'ottica.
589.9EUR6589,90 €
*
Tempi di consegna circa 12-16 giorni. 6 pz. nel magazzino USA
Caratteristiche:Adatto per: SpringfieldColore: NeroMateriale: AcciaioModello: M14, M1ANumero di basi: 1 pezzoTipo: Basi tattiche
Adatto per:
Springfield
Colore:
Nero
Materiale:
Acciaio
Modello:
M14,M1A
Numero di basi:
1 pezzo
Tipo:
Basi tattiche
Peso della spedizione: 0,363kgAltezza di spedizione: 41mmLarghezza di spedizione: 91mmLunghezza di spedizione: 165mm
Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope.
Supporto interamente lavorato in acciaio indurito con montaggio a tre punti, fornisce una base stabile e sicura per il montaggio di ottiche con grande obiettivo. Si fissa facilmente alla scanalatura della guida del caricatore e al perno di montaggio del ricevitore senza modifiche al fucile. Una robusta vite di bloccaggio anteriore assicura una stabilità solida come la roccia all'anello del ricevitore. Il canale di mira consente l'uso di mirini di ferro di riserva senza rimuovere l'ottica.
SPECS: Acciaio 4140, nero, finitura al nitrurato. Indurito a Rc 60-62. Lunghezza 5.38" (13.6cm). Altezza 1.875" (4.7cm). Peso 10.9 oz (310 g).
Altro...
Punteggi dei clienti per SMITH ENTERPRISE M14 SCOPE MOUNT
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3,3
Should have bought a Sadlak.(14/11/2010)
I've been trying to get this mount to work for over 3 yrs. Shoots 20" high with MK IV scope adjusted to full down limit (that's 45 minutes down from mechanical center). Tried different rings (Smith, Burris Signature), adding shims between rings and mount, raising front of mount with forward setscrew. Shoots groups under 1" @ 100yds when installed per instructions with Smith rings, but 20" high. Shot like a shotgun (6" groups) with other attempts to lower point of impact. Mount manufacturer said SA, NM, M1A not manufactured to tolerance. It groups under an inch! Should have bought a Sadlak.
One of the Best Mounts for M1A/M14(16/12/2010)
This is a good Mount. A little more difficult to install than a regular mount like bolt guns but this is due to the nature of the M14. Sadlak and Smith Enterprise are very much alike if not exactly. The Mounts are manufactured to G.I. receiver specs. I have installed these on many M14's in Iraq. But some Springfield's Receivers are not to G.I. specs. You can send the rifle to Smith Enterprise or another competent gunsmith who is good with these style of rifles. I would recommend this mount wholeheartedly. I've never had problems with it that could not be overcame.
Rock Solid(09/08/2012)
Great mount, not the easiest to install but well worth the time and money. Before trying to put it on - Read the instructions!