The M-LOK MVG is a light weight vertical foregrip that attaches directly to M-LOK compatible hand guards and forends. The M-LOK MVG is made from the same high quality polymer as other Magpul products, and uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, the M-LOK MVG has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
SPECS: Color- Black, Flat Dark Earth, Gray, or O.D. Green. Material- Polymer.
Altro...
Il MVG M-LOK è un foregrip verticale peso leggero che si attacca direttamente al M-LOK paramani compatibili e calciature. Il M-LOK MVG fatta dallo stesso polimero di alta qualità come altri prodotti Magpul e utilizza la nuova texture Magpul TSP per controllo positivo in tutti gli ambienti. Con contorni arrotondati e una lunghezza più corta, il MVG M-LOK è stato ottimizzato per l'uso con il metodo"pollice break" di ripresa e può essere utilizzato anche come un foregrip verticale tradizionale.
Specifiche: colore nero, terra piatta scuro, grigio o verde O.D.. Polimero materiale -.
Altro...
Punteggi dei clienti per MAGPUL M-LOK VERTICAL GRIP POLYMER BLACK
Numero di punteggi: 6
Da brownells.com: 5
Punteggio medio: 4
Good, If Limited, Option(14/03/2016)
The MLOK system allows for tighter drop-in handguards by letting you add or remove accessories without removing the guard. The system involves pairing screws with rectangular lock nuts set to a precise height (often found through trial and error) and inserting the complete assembly into the mounting slots. The two screws may share the same slot or bridge adjacent ones, offering flexibility on position. An allen wrench is then inserted through the bottom to actuate the screw heads and thereby turn the nuts about ninety degrees, hopefully clamping them to the interior plate and holding them as you continue tightening. Visual confirmation of nut position is important, but difficult in many positions. Once achieved, though, the mount is very tight and secure. The grip itself is somewhat narrower and arguably a touch shorter than its MOE forbear, and sports a rougher texture on the sides. The concave zone at the top is more pronounced, which combines with the narrower profile for a distinctly slimmer feel. I'd personally like to see a more "full-sized" version in the future, but for now this is the only MLOK vertical grip I can find. In any event, it works reasonably well for a variety of gripping styles, if not spectacularly for any one of them, so it's hard to complain.
Good for lightweight builds(30/06/2016)
A pain to install, it can and will damage poly handguards if one is not careful and tightens the screws too much. Lightweight, stable, and comfy though.
Awesome Vertical Grip(23/07/2017)
As of right now, this appears to be one of the only vertical grips that attatch directly to M-Lok compatible handguards. Installed easily into my V-Seven Weapon Systems M-Lok handguard. Very secure mounting system and slim enough to install under a low profile gas block. Looks very clean and fits flush with the handguard. The grip is fairly short, and aids in a thumb break grip and really helps with pulling the rifle into your shoulder during recoil. Very comfortable grip texture and lightweight at only 1.4oz in total. Great Magpul quality as usual. Thank you Brownells.
Mlok hardware junk (11/05/2018)
Followed the instructions grip was tighten on the mlok rail and it still had play. The vertical grip itself is fine it's the caming mlok t nuts that are junk. I'm switching them out with the standard reliable mount n slot hard ware.
Magpul M-Lok(21/06/2018)
I see guys on line doing video's for installing M-Lok items...Its super simple,adjust the screws like the instructions say...add a touch of blue lok-tight and tighten 15 foot pounds. Or remove the handguards and follow the instructions.
This grip is a little shorter than the Magpul non MOE...will leave your pinky finger wanting more room. But will do the job and will tighten down so well when you hit the ground, it will stay in place.*"*Plus the FACT standarf Magpul gear will not work on a weapon with Magpul MOE M-Lok slots...
The M-LoK slots on hand guards are bigger and wider than standard Magpul hand guards...FYI
Ottimo, grip e dimensioni perfette.(20/02/2016)
Ben realizzato, con una superficie grippante davvero efficace. Il montaggio è semplicissimo, ma al tempi stesso molto solido.
N. prodotto: 100016130 MAGPUL M-LOK VERTICAL GRIP POLYMER BLACK Parti Fabbricante: MAG597BLK873750004655 Il MVG M-LOK è un foregrip verticale peso leggero che si attacca direttamente al M-LOK paramani compatibili e calciature. Il M-LOK MVG fatta dallo stesso polimero di alta qualità come altri prodotti Magpul e utilizza la nuova texture Magpul TSP per controllo positivo in tutti gli ambienti. Con contorni arrotondati e una lunghezza più corta, il MVG M-LOK è stato ottimizzato per l'uso con il metodo"pollice break" di ripresa e può essere utilizzato anche come un foregrip verticale tradizionale.
37.9EUR037,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Made in Usa
Classificazione per l'export dagli US: 0A501.y.1
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 100016134 MAGPUL M-LOK VERTICAL GRIP POLYMER FLAT DARK EARTH Parti Fabbricante: MAG597FDE873750004662 Il MVG M-LOK è un foregrip verticale peso leggero che si attacca direttamente al M-LOK paramani compatibili e calciature. Il M-LOK MVG fatta dallo stesso polimero di alta qualità come altri prodotti Magpul e utilizza la nuova texture Magpul TSP per controllo positivo in tutti gli ambienti. Con contorni arrotondati e una lunghezza più corta, il MVG M-LOK è stato ottimizzato per l'uso con il metodo"pollice break" di ripresa e può essere utilizzato anche come un foregrip verticale tradizionale.
37.9EUR20737,90 €
*
Tempi di consegna circa 14-21 giorni. Più di 10 pz. nel magazzino USA
Caratteristiche:Attachment: M-LOKColore: Flat Dark EarthMateriale: Polymer
N. prodotto: 100016136 MAGPUL M-LOK VERTICAL GRIP POLYMER GRAY Parti Fabbricante: MAG597GRY873750004679 Il MVG M-LOK è un foregrip verticale peso leggero che si attacca direttamente al M-LOK paramani compatibili e calciature. Il M-LOK MVG fatta dallo stesso polimero di alta qualità come altri prodotti Magpul e utilizza la nuova texture Magpul TSP per controllo positivo in tutti gli ambienti. Con contorni arrotondati e una lunghezza più corta, il MVG M-LOK è stato ottimizzato per l'uso con il metodo"pollice break" di ripresa e può essere utilizzato anche come un foregrip verticale tradizionale.
37.9EUR8337,90 €
*
Tempi di consegna circa 14-21 giorni. Più di 10 pz. nel magazzino USA
N. prodotto: 100016139 MAGPUL M-LOK VERTICAL GRIP POLYMER O.D. GREEN Parti Fabbricante: MAG597ODG873750004686 Il MVG M-LOK è un foregrip verticale peso leggero che si attacca direttamente al M-LOK paramani compatibili e calciature. Il M-LOK MVG fatta dallo stesso polimero di alta qualità come altri prodotti Magpul e utilizza la nuova texture Magpul TSP per controllo positivo in tutti gli ambienti. Con contorni arrotondati e una lunghezza più corta, il MVG M-LOK è stato ottimizzato per l'uso con il metodo"pollice break" di ripresa e può essere utilizzato anche come un foregrip verticale tradizionale.
37.9EUR5037,90 €
*
Tempi di consegna circa 14-21 giorni. Più di 10 pz. nel magazzino USA
The M-LOK MVG is a light weight vertical foregrip that attaches directly to M-LOK compatible hand guards and forends. The M-LOK MVG is made from the same high quality polymer as other Magpul products, and uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, the M-LOK MVG has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
SPECS: Color- Black, Flat Dark Earth, Gray, or O.D. Green. Material- Polymer.
Altro...
Il MVG M-LOK è un foregrip verticale peso leggero che si attacca direttamente al M-LOK paramani compatibili e calciature. Il M-LOK MVG fatta dallo stesso polimero di alta qualità come altri prodotti Magpul e utilizza la nuova texture Magpul TSP per controllo positivo in tutti gli ambienti. Con contorni arrotondati e una lunghezza più corta, il MVG M-LOK è stato ottimizzato per l'uso con il metodo"pollice break" di ripresa e può essere utilizzato anche come un foregrip verticale tradizionale.
Specifiche: colore nero, terra piatta scuro, grigio o verde O.D.. Polimero materiale -.
Altro...
Punteggi dei clienti per MAGPUL M-LOK VERTICAL GRIP POLYMER BLACK
Numero di punteggi: 6
Da brownells.com: 5
Punteggio medio: 4
Good, If Limited, Option(14/03/2016)
The MLOK system allows for tighter drop-in handguards by letting you add or remove accessories without removing the guard. The system involves pairing screws with rectangular lock nuts set to a precise height (often found through trial and error) and inserting the complete assembly into the mounting slots. The two screws may share the same slot or bridge adjacent ones, offering flexibility on position. An allen wrench is then inserted through the bottom to actuate the screw heads and thereby turn the nuts about ninety degrees, hopefully clamping them to the interior plate and holding them as you continue tightening. Visual confirmation of nut position is important, but difficult in many positions. Once achieved, though, the mount is very tight and secure. The grip itself is somewhat narrower and arguably a touch shorter than its MOE forbear, and sports a rougher texture on the sides. The concave zone at the top is more pronounced, which combines with the narrower profile for a distinctly slimmer feel. I'd personally like to see a more "full-sized" version in the future, but for now this is the only MLOK vertical grip I can find. In any event, it works reasonably well for a variety of gripping styles, if not spectacularly for any one of them, so it's hard to complain.
Good for lightweight builds(30/06/2016)
A pain to install, it can and will damage poly handguards if one is not careful and tightens the screws too much. Lightweight, stable, and comfy though.
Awesome Vertical Grip(23/07/2017)
As of right now, this appears to be one of the only vertical grips that attatch directly to M-Lok compatible handguards. Installed easily into my V-Seven Weapon Systems M-Lok handguard. Very secure mounting system and slim enough to install under a low profile gas block. Looks very clean and fits flush with the handguard. The grip is fairly short, and aids in a thumb break grip and really helps with pulling the rifle into your shoulder during recoil. Very comfortable grip texture and lightweight at only 1.4oz in total. Great Magpul quality as usual. Thank you Brownells.
Mlok hardware junk (11/05/2018)
Followed the instructions grip was tighten on the mlok rail and it still had play. The vertical grip itself is fine it's the caming mlok t nuts that are junk. I'm switching them out with the standard reliable mount n slot hard ware.
Magpul M-Lok(21/06/2018)
I see guys on line doing video's for installing M-Lok items...Its super simple,adjust the screws like the instructions say...add a touch of blue lok-tight and tighten 15 foot pounds. Or remove the handguards and follow the instructions.
This grip is a little shorter than the Magpul non MOE...will leave your pinky finger wanting more room. But will do the job and will tighten down so well when you hit the ground, it will stay in place.*"*Plus the FACT standarf Magpul gear will not work on a weapon with Magpul MOE M-Lok slots...
The M-LoK slots on hand guards are bigger and wider than standard Magpul hand guards...FYI
Ottimo, grip e dimensioni perfette.(20/02/2016)
Ben realizzato, con una superficie grippante davvero efficace. Il montaggio è semplicissimo, ma al tempi stesso molto solido.