Introducing the newest addition to the EGW lineup: The Hunter series picatinny scope mount. EGW saw the need for a shorter, lighter, heavy duty, picatinny scope mount and this is what they came up with. After countless hours of prototyping and testing, the Hunter mount was born. Featuring: 7075 T6 aluminum for an extremely durable yet lightweight construction. Type III hardcoat anodizing protects the mount from whatever nature can throw at it. Chamfered edges provide a snag free hunt. A compact overall length sheds 15% of its weight compared to our other Heavy Duty mounts. This mount comes standard with a bevel on both sides making it ambidextrous. The bolt pattern on the Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. They machine these in our shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). EGW recommends: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Bergara B14 Long Action (#6 Screws) Bergara Premier Long Action (#8 Screws) Remington 700 Long Action Remington 700 Long Action (#8 Screws) Remington 700 Long Action Police Tactical (#8 Screws) Remington 721 Long Action Remington 725 Long Action Christensen Arms Long Action Mauser M18 (All Calibers) Sauer 100 (All Calibers) Sauer 101 (All Calibers)
Scopri il nuovo supporto per ottica picatinny della serie Hunter di EGW!
EGW ha riconosciuto la necessità di un supporto per ottica picatinny più corto, leggero e robusto, e così è nato il montaggio Hunter. Dopo innumerevoli ore di prototipazione e test, il supporto Hunter è stato realizzato.
Caratteristiche principali:
- Materiale: Alluminio 7075 T6 per una costruzione estremamente resistente ma leggera.
- Protezione: Anodizzazione dura di tipo III che protegge il supporto da qualsiasi condizione atmosferica.
- Design: Bordo smussato per una caccia senza impigli.
- Compattezza: Lunghezza complessiva compatta che riduce del 15% il peso rispetto ad altri supporti Heavy Duty.
- Ambidestro: Viene fornito standard con un bisello su entrambi i lati.
Il modello di montaggio per Remington 700 Long Action è compatibile con fucili Remington 700 Long Action (esempio 30-06, 300 Win mag), oltre ai modelli 740 e 40x. Tuttavia, il montaggio Remington 700 NON si adatta ai fucili Howa 1500 o Weatherby Vanguard. Sebbene il modello di bullone sia simile, il resto del montaggio (porta di espulsione, lunghezza, ecc.) lo rende inutilizzabile su questi due fucili.
EGW consiglia di misurare la distanza dei fori nel tuo ricevitore per confermare che corrisponda alle dimensioni pubblicate. Le scanalature picatinny si estendono per tutta la lunghezza del binario, offrendo flessibilità nell'installazione di anelli per ottiche e altri accessori. Il canale centrale riduce la massa complessiva del supporto e, nella maggior parte dei casi, non ostacolerà l'uso di mire in ferro di fabbrica.
I montaggi per ottiche a pezzo unico di EGW sono la scelta ovvia per cacciatori e tiratori tattici. Vengono lavorati nel loro laboratorio utilizzando uno dei loro centri di lavorazione. Dopo la lavorazione, i montaggi vengono levigati, sabbiati e anodizzati di tipo III per una durata prolungata.
Installazione:
EGW raccomanda un torque di 20 pollici-lbs e una goccia di loctite blu (loctite venduto separatamente).
Consigli di utilizzo:
- 0 MOA: se si spara da 0 a 500 yard.
- 20 MOA: se si spara da 500 a 1000 yard.
Quando si azzera il fucile con un montaggio da 20 MOA, EGW consiglia di azzerare a 200 yard. L'intero montaggio e gli accessori (dai dadi di montaggio e chiave fino all'imballaggio) sono realizzati negli USA.
Compatibilità:
- Bergara B14 Long Action (#6 Viti)
- Bergara Premier Long Action (#8 Viti)
- Remington 700 Long Action
- Remington 700 Long Action (#8 Viti)
- Remington 700 Long Action Police Tactical (#8 Viti)
- Remington 721 Long Action
- Remington 725 Long Action
- Christensen Arms Long Action
- Mauser M18 (Tutti i Calibri)
- Sauer 100 (Tutti i Calibri)
- Sauer 101 (Tutti i Calibri)