HUNT SCOPE RINGS Given the success of their MATCH and TACTICAL scope mounts, Area 419 knew what the HUNT rings needed to be. Light, rigid, and able to hold onto an optic in a dramatic recoiling environment. To do this was no small manufacturing task. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made. Like most rings, these begin as separate parts. Area 419 are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, Area 419 produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in their world-class machining centers. Rings are then brought off the machine in sets, and packaged together so you know that your rings were made for one another, and you can rely on them for decades. Is it overkill? Probably. But Area 419 think it’s the right way. So that’s what Area 419 are going to do. NOTE: TO KEEP THE SIZE AND WEIGHT OF THESE RINGS TO A MINIMUM, THERE ARE NO ACCESSORY ATTACHMENT POINTS ON THESE RINGS. IF YOU WANT TO BE ABLE TO ADD ACCESSORIES TO YOUR RINGS, PLEASE CHECK OUT THEIR MATCH OR TACTICAL OFFERINGS. Specifications: Material: 7075 Aerospace Grade Billet Aluminum (with Stainless Steel Hardware) Coating: Type 3 Hardcoat Anodize (internal bore is raw aluminum) Weight: 4 oz/set (30mm Medium)
Scopri i supporti per ottiche HUNT di AREA 419
I supporti per ottiche HUNT di AREA 419 sono progettati per offrire una soluzione leggera e rigida, in grado di mantenere l'ottica saldamente in posizione anche in ambienti con forti rinculi.
Descrizione del prodotto
Dopo il successo dei loro supporti per ottiche MATCH e TACTICAL, AREA 419 ha saputo creare i supporti HUNT. Questo non è stato un compito di produzione semplice. Siamo scesi in un tunnel di ricerca, arrivando a un processo che garantisce supporti abbinati al foro finale, con interni in alluminio grezzo, per una presa sull'ottica più affidabile e precisa rispetto a qualsiasi altro prodotto sul mercato.
Come la maggior parte dei supporti, questi iniziano come parti separate. AREA 419 produce le basi e i cappucci in lotti. Mentre molti produttori inviano queste parti per anodizzazione e poi le assemblano, AREA 419 segue ulteriori passaggi. Una volta che queste parti tornano dall'anodizzazione, vengono completamente assemblate, riposizionate in apposite staffe e i cappucci vengono serrati secondo le specifiche su spessori appositamente realizzati (per dare spazio ai supporti di serrarsi sull'ottica), e infine forati come set nei loro centri di lavorazione di classe mondiale. I supporti vengono poi rimossi dalla macchina in set e confezionati insieme, garantendo che i tuoi supporti siano stati realizzati per funzionare in perfetta sintonia e che tu possa fare affidamento su di essi per decenni.
È eccessivo? Probabilmente. Ma AREA 419 crede che sia il modo giusto. Ecco perché AREA 419 procederà in questo modo.
Nota: Per mantenere le dimensioni e il peso di questi supporti al minimo, non ci sono punti di attacco per accessori su di essi. Se desideri aggiungere accessori ai tuoi supporti, ti invitiamo a controllare le loro offerte MATCH o TACTICAL.
Specifiche
- Materiale: Alluminio Billet di grado aerospaziale 7075 (con hardware in acciaio inossidabile)
- Rivestimento: Tipo 3 Hardcoat Anodize (il foro interno è in alluminio grezzo)
- Peso: 4 oz/set (30mm Medio)