Strike Industries is proud to introduce a revolutionary new product The Universal (Optics) Mount for Glock. It has the lowest height-over-bore mount in the industry without the hassle of cutting your slide or cost of buying an aftermarket slide! We have put many hours and 1000's of rounds down range with most of the more popular red dot optics on the market with no problems whatsoever! This includes the Burris* Fast* Fire* II & III, Leupold* Delta Point* reflex sights, Docters* II & III, EoTech* MRDS*, Trijicon* RMR,* Vortex Venom and Viper, and many others. The mount itself is secured to the slide via the dove tail with 6 set screws. Two in the dovetail cut and one forward and aft of the dovetail and two more to prevent any shift. This provides a steady, sturdy and rugged mount that will repeatedly hold zero. Other mounting hardware included is 6mm, 8mm and 10mm screws (two of each) that are used to fit and secure most of the popular optics out there. (Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Trijicon RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM. Disclaimer- You may mark your slide when using this mount to properly secure the mount. It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation. Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
Scopri il nuovo supporto universale per ottiche G.U.M. per Glock®!
Strike Industries è orgogliosa di presentare un prodotto rivoluzionario: il supporto universale (ottiche) per Glock. Questo supporto è il più basso del settore in termini di altezza sopra il mirino, senza la necessità di tagliare il tuo carrello o spendere per un carrello aftermarket!
Abbiamo trascorso molte ore e migliaia di colpi con la maggior parte degli ottici a punto rosso più popolari sul mercato, senza alcun problema! Questo include:
- Burris* Fast* Fire* II & III
- Leupold* Delta Point* mirini reflex
- Docters* II & III
- EoTech* MRDS*
- Trijicon* RMR*
- Vortex Venom e Viper
- e molti altri.
Il supporto stesso è fissato al carrello tramite il dovetail con 6 viti di fissaggio: due nel taglio dovetail e una anteriore e posteriore al dovetail, oltre a due ulteriori viti per prevenire qualsiasi spostamento. Questo fornisce un supporto stabile, robusto e resistente che manterrà ripetutamente il punto d'impatto.
Il resto dell'hardware di montaggio incluso comprende viti da 6mm, 8mm e 10mm (due di ciascuna) utilizzate per adattare e fissare la maggior parte degli ottici popolari. (A seconda dell'ottica che possiedi, dovrai trovare le viti che corrispondono al tuo ottica specifico. Ci sono due viti speciali per il Trijicon RMR.)
Una volta fissato il GUM al tuo carrello e trovati i supporti corretti (due set di supporti rinforzati inclusi) per il tuo ottica, procedi a montare il tuo ottica sul supporto e utilizza le ultime due viti di fissaggio più lunghe per fissare il tuo ottica al GUM.
Nota: Potresti segnare il tuo carrello durante l'uso di questo supporto per fissarlo correttamente. Si consiglia vivamente di far installare il GUM da un armaiolo e di utilizzare gli strumenti corretti per l'installazione. Il Leupold Delta Point* può essere montato, ma non con i supporti rinforzati per garantire il 100% di sicurezza.