Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia
700598350470 100037261
Strike Industries is proud to introduce a revolutionary new product The Universal (Optics) Mount for Glock. It has the lowest height-over-bore mount in the industry without the hassle of cutting your slide or cost of buying an aftermarket slide! We have put many hours and 1000's of rounds down range with most of the more popular red dot optics on the market with no problems whatsoever! This includes the Burris* Fast* Fire* II & III, Leupold* Delta Point* reflex sights, Docters* II & III, EoTech* MRDS*, Trijicon* RMR,* Vortex Venom and Viper, and many others. The mount itself is secured to the slide via the dove tail with 6 set screws. Two in the dovetail cut and one forward and aft of the dovetail and two more to prevent any shift. This provides a steady, sturdy and rugged mount that will repeatedly hold zero. Other mounting hardware included is 6mm, 8mm and 10mm screws (two of each) that are used to fit and secure most of the popular optics out there. (Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Trijicon RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM.   Disclaimer- You may mark your slide when using this mount to properly secure the mount. It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation. Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
74.9 74.9 1 EUR
N. prodotto: 100037261
STRIKE INDUSTRIES G.U.M. UNIVERSAL OPTIC MOUNT FOR GLOCK
Parti Fabbricante: SIGLOCKGUM 700598350470 Strike Industries è orgogliosa di presentare un prodotto rivoluzionario: il supporto universale per ottiche (Universal Optics Mount) per Glock. Offre il montaggio con l'altezza dal fusto più bassa del settore senza la necessità di modificare la carrello o il costo di acquistare un carrello aftermarket! Abbiamo impiegato molte ore e sparato migliaia di colpi con alcune delle ottiche a punto rosso più popolari sul mercato senza alcun problema! Questo include i mirini reflex Burris* Fast* Fire* II & III, Leupold* Delta Point*, Docters* II & III, EoTech* MRDS*, Trijicon* RMR,* Vortex Venom e Viper, e molti altri. Il supporto è fissato al carrello tramite la coda di rondine con 6 viti di bloccaggio. Due nella coda di rondine, una davanti e una dietro la coda di rondine e due ulteriori per prevenire qualsiasi spostamento. Ciò fornisce un supporto stabile, solido e robusto che manterrà ripetutamente il punto zero. Altra ferramenta inclusa comprende viti da 6mm, 8mm e 10mm (due di ciascuna) che sono utilizzate per adattare e fissare la maggior parte delle ottiche popolari in circolazione. (A seconda dell'ottica che possedete, dovrete trovare le viti che corrispondono alla vostra particolare ottica. Ci sono due viti speciali per Trijicon RMR. Una volta che avete fissato il GUM al vostro carrello e trovato il giusto perno (due set di perni di rinforzo inclusi) per la vostra ottica, procedete con il montaggio della vostra ottica sul perno e utilizzate le ultime due viti di fissaggio più lunghe per assicurare la vostra ottica al GUM. Disclaimer: Potreste segnare il vostro carrello quando utilizzate questo supporto per fissarlo correttamente. Si raccomanda vivamente di far installare il GUM da un armaiolo e di utilizzare gli strumenti corretti per l'installazione. Il Leupold Delta Point* può essere montato, ma non con perni di rinforzo per garantire il 100%
74.9 EUR 0 74,90 € *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Glock Colore: Nero Materiale: Alluminio Numero di basi: 1 pezzo Tipo: Basi per adattatori

Caratteristiche

Adatto per: Glock Colore: Nero Materiale: Alluminio Numero di basi: 1 pezzo Tipo: Basi per adattatori Peso della spedizione: 0,046kg Altezza di spedizione: 38mm Larghezza di spedizione: 32mm Lunghezza di spedizione: 76mm




Strike Industries is proud to introduce a revolutionary new product The Universal (Optics) Mount for Glock. It has the lowest height-over-bore mount in the industry without the hassle of cutting your slide or cost of buying an aftermarket slide! We have put many hours and 1000's of rounds down range with most of the more popular red dot optics on the market with no problems whatsoever! This includes the Burris* Fast* Fire* II & III, Leupold* Delta Point* reflex sights, Docters* II & III, EoTech* MRDS*, Trijicon* RMR,* Vortex Venom and Viper, and many others. The mount itself is secured to the slide via the dove tail with 6 set screws. Two in the dovetail cut and one forward and aft of the dovetail and two more to prevent any shift. This provides a steady, sturdy and rugged mount that will repeatedly hold zero. Other mounting hardware included is 6mm, 8mm and 10mm screws (two of each) that are used to fit and secure most of the popular optics out there. (Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Trijicon RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM.   Disclaimer- You may mark your slide when using this mount to properly secure the mount. It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation. Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
Newsletter