CN5F (Castle Nut, A5, Forward Controls) is an extended version of CNF Forward Controls Design (FCD) have been making since 2018. CN5F is designed specifically for the superb Vltor A5 system, CN5F is 0.1" longer, and is as long as FCD can make a castle nut while ensuring backward compatibility, and the stock's ability to fully collapse on Vltor's RE-A5 and FCD's RE5F. Note: not all stocks will fully collapse on A5 compatible REs. For more information on the differences between RE-A5, RE5F and RE10/A5SR, please follow this link: https://www.forwardcontrolsdesign.com/Vltor-RE-A5-vs-RE10-A5SR_ep_78-1.html CN5F aims to cover as much of the threaded area of a receiver extension (RE) as possible. It could be made longer, but it will run into backward compatibility issues with some REs' timing when installing the castle nut and end plate on the RE. CN5F is made specifically for the Vltor A5 system, and it will allow even the longest carbine stocks to fully collapse on RE-A5 and FCD's RE5F. While CN5F will also work on standard TDP spec length RE, the additional length of the castle nut will prevent the carbine stock to fully collapse. Other than its length, CN5F shares common features with its smaller brother, CNF. The TDP spec castle nut is a simple and robust fastener that is almost perfect for the job it's tasked to perform. Over the years, FCD have consistently come up with two minor gripes, first is its staking notches seem rather shallow and short, second is FCD don't enjoy using the castle nut's wrench notches as serrations (FCD's fingers invariably find their way to these sharp cutouts) to rotate it towards to the end plate while installing it. CN5F (Castle Nut, Forward Controls) is based on the TDP spec castle nut, with couple of changes: 0.1" longer. Staking notches angle changed from 45 to 30 degrees, this results in longer (25% longer than TDP spec) and deeper notches than found on TDP castle nuts. Number of staking notches increased from 3 to 4, spaced equally on the CNF. The castle nut is to be staked in two places, FCD are not advocating staking in more than two places, CNF's 4 staking notches mean that, at all times, 3 will be visible and available for staking, it simply gives the user more staking location options. Coarse serrations on the wrench side of the nut, a single use feature to make it easier while rotating the CNF towards the end plate. It is FCD’s opinion that a castle nut should be staked per TM, CNF's and CN5F's longer and deeper notch reinforces the belief, that once installed and staked, it will not loosen without the user's deliberate action. Forward Controls Design like the idea of quick detach, but some things on an AR are meant to stay put, and considerable effort was made to ensure that by the original designers. CNF and CN5F are a continuation and evolution in that direction. CN5F is billet machined in 4140 PH steel, and black nitrided (Cerakoted FDE, OD green, and burnt bronze also available). As with everything Forward Controls Design produces, it is proudly made in the USA. Weight: 0.51oz Material: 4140 PH Made in USA
Scopri il Castello A5 di Forward Controls Design
Il CN5F (Castello A5, Forward Controls) è una versione estesa del castello CNF che Forward Controls Design (FCD) produce dal 2018. Progettato specificamente per il sistema Vltor A5, il CN5F è lungo 0.1" in più, garantendo al contempo la compatibilità con i modelli precedenti e la capacità di collassare completamente sulle estensioni RE-A5 di Vltor e RE5F di FCD. Si prega di notare che non tutte le spalle si collasseranno completamente su RE compatibili con A5.
Per ulteriori informazioni sulle differenze tra RE-A5, RE5F e RE10/A5SR, visita il seguente link: Differenze tra RE-A5 e RE10/A5SR.
Il CN5F è progettato per coprire il maggior numero possibile di aree filettate su un'estensione del ricevitore (RE). Sebbene potrebbe essere realizzato più lungo, ciò comporterebbe problemi di compatibilità con il tempismo di alcune RE durante l'installazione del castello e della piastra finale. Il CN5F è realizzato specificamente per il sistema Vltor A5, permettendo anche alle spalle più lunghe di collassare completamente su RE-A5 e RE5F di FCD. Anche se il CN5F funziona anche su RE di lunghezza standard TDP, la lunghezza aggiuntiva del castello impedirà alla spalla di collassare completamente.
Caratteristiche principali
- Lunghezza: 0.1" più lungo rispetto al castello TDP standard.
- Angolo delle notches di staking cambiato da 45 a 30 gradi, risultando in notches più lunghe (25% più lunghe rispetto alle notches TDP) e più profonde.
- Numero di notches di staking aumentato da 3 a 4, equamente distribuite sul CNF.
- Serrature grossolane sul lato della chiave, per facilitare la rotazione del CNF verso la piastra finale.
FCD ritiene che un castello debba essere fissato secondo il manuale TM. Le notches più lunghe e profonde di CNF e CN5F rafforzano la convinzione che, una volta installato e fissato, non si allenterà senza un'azione deliberata da parte dell'utente. Forward Controls Design apprezza l'idea di sgancio rapido, ma alcune cose su un AR devono rimanere in posizione, e sono stati fatti notevoli sforzi per garantire ciò dai progettisti originali. CNF e CN5F rappresentano una continuazione e un'evoluzione in quella direzione.
Il CN5F è lavorato a macchina in acciaio 4140 PH e trattato con nitrurazione nera (disponibile anche in Cerakote FDE, verde OD e bronzo bruciato). Come tutto ciò che produce Forward Controls Design, è orgogliosamente realizzato negli USA.
Peso: 0.51oz
Materiale: 4140 PH
Prodotto negli USA