Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia
793811763348 430105324
The Strike Industries Extended Magazine Plate for GLOCK™ G19 (9mm) was designed to provide smoother magazine reloading through a low drag/no snag design while maintaining maximum magazine capacity with any OEM Double Stack GLOCK™ magazine for G19. The Extended Magazine Plate (EMP) provides an additional +5 rounds to any G19 GLOCK™ magazine. Included is our special steel locking plate, which compared to other magazine extensions on the market, features a hook design which adds extra locking security to increase reliability when fully loaded with rounds. WARNING: DO NOT OVERTIGHTEN set screw when installing the steel locking plate. Steel locking plate may appear "loose" however when the set screw is flush with the back of the EMP body, you do not have to tighten any more. Overtightening from this point on will potentially damage your product. See instructional video for proper installation of item. If you are unsure, please contact our customer support team or consult with your local gunsmith. Package includes: 1x Magazine Plate Extension for GLOCK™ G19 1x Extended length spring 1x Steel locking plate 1x Steel locking plate set screw Features: Plus 5 round capacity for 9mm Low drag/No snag design Impact-resistant polymer Includes Locking steel plate COMPATIBILITY: SI EMP Pocket Clip NOT COMPATIBLE: G23 (.40 Cal) 10-round magazines SI Grip Plug Tool For GLOCK™ for GEN3 or GEN4&5 NOTE: Not for sale to California residents due to 10-round state laws. The checkout process will show NO shipping method available. COMPATIBILITY: For GLOCK™ factory OEM G19 double stack magazines ETS Magazines that are over 10 rounds. Please note we cannot control or even be aware if ETS ever changes their design and the SI EMP no longer is compatible Magwell: tested to work with SI Magwell, Magpul and JP Enterprises It is the responsibility of the customer to know and abide with local gun laws. DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
31.9 31.9 1 EUR
N. prodotto: 430105324
STRIKE INDUSTRIES SI MAGAZINE PLATE FOR GLOCK 19
Parti Fabbricante: SI-EMP-G19 793811763348 La Strike Industries Extended Magazine Plate per GLOCK™ G19 (9mm) è stata progettata per garantire un caricamento più fluido del caricatore attraverso un design a bassa resistenza/senza intoppi, mantenendo al contempo la massima capacità del caricatore con qualsiasi caricatore OEM Double Stack per GLOCK™ G19. La Extended Magazine Plate (EMP) fornisce +5 colpi aggiuntivi a qualsiasi caricatore GLOCK™ G19. Inclusa c'è la nostra speciale piastra di bloccaggio in acciaio che, rispetto ad altre estensioni di caricatori sul mercato, presenta un design ad uncino che aggiunge un'ulteriore sicurezza di bloccaggio per aumentare l'affidabilità quando è completamente carico di colpi. AVVERTENZA: NON STRINGERE eccessivamente la vite di fissaggio durante l'installazione della piastra di bloccaggio in acciaio. La piastra di bloccaggio in acciaio può sembrare "lenta", tuttavia quando la vite di fissaggio è a filo con il retro del corpo EMP, non è necessario stringere ulteriormente. Stringere oltre questo punto potenzialmente danneggerà il prodotto. Guarda il video istruzionale per un'installazione corretta dell'articolo. Se non sei sicuro, si prega di contattare il nostro team di supporto clienti o di consultare il tuo armaiolo locale. Il pacchetto include: 1x Estensione Piastra del Caricatore per GLOCK™ G19 1x Molla di lunghezza estesa 1x Piastra di bloccaggio in acciaio 1x Vite di fissaggio della piastra di bloccaggio in acciaio Caratteristiche: Capacità aggiuntiva di 5 colpi per 9mm Design a bassa resistenza/senza intoppi Polimero resistente agli urti Include piastra di bloccaggio in acciaio COMPATIBILITÀ: SI EMP Pocket Clip NON COMPATIBILE: Caricatori G23 (.40 Cal) da 10 colpi SI Grip Plug Tool per GLOCK™ per GEN3 o GEN4&5 NOTA: Non in vendita per i residenti in California a causa delle leggi statali sui caricatori da 10 colpi. Il processo di checkout mostrerà che nessun metodo di spedizione è disponibile. COMPATIBILITÀ: Per caricatori OEM G19 double stack di fabbrica GLOCK™ Caricatori ETS che sono oltre i 10 colpi. Si prega di notare che non possiamo controllare o essere a conoscenza se ETS cambia il loro design e il SI EMP non è più compatibile Magwell: testato per funzionare con SI Magwell, Magpul e JP Enterprises È responsabilità del cliente conoscere e rispettare le leggi locali sulle armi. AVVERTENZA: -Questo prodotto non è fabbricato, autorizzato, approvato o garantito da GLOCK. GLOCK non garantisce né dichiara che questo prodotto sia compatibile con le pistole GLOCK. --“GLOCK” è un marchio registrato di GLOCK, Inc. ed è uno dei tanti marchi di proprietà di GLOCK, Inc. e GLOCK Ges.m.b.H. Né Strike Industries Inc. né questo sito sono affiliati in alcun modo con, o altrimenti approvati da, GLOCK, Inc. o GLOCK Ges.m.b.H. L'uso di “GLOCK” in questa pagina serve solo a pubblicizzare la vendita di pistole, parti o componenti GLOCK. -AVVERTENZA PROPOSIZIONE 65 DELLA CALIFORNIA:- AVVERTENZA: Questo prodotto contiene sostanze chimiche note allo Stato della California per causare il cancro e difetti alla nascita o altri danni riproduttivi. Per maggiori informazioni: www.P65Warnings.ca.gov
31.9 EUR 7 31,90 € *
Tempi di consegna circa 12-16 giorni.
7 pz. nel magazzino USA
Caratteristiche: Adatto per: Glock Modello: 19 Tipo: Extension

Caratteristiche

Adatto per: Glock Modello: 19 Tipo: Extension Peso della spedizione: 0,045kg Altezza di spedizione: 235mm Larghezza di spedizione: 32mm Lunghezza di spedizione: 102mm




The Strike Industries Extended Magazine Plate for GLOCK™ G19 (9mm) was designed to provide smoother magazine reloading through a low drag/no snag design while maintaining maximum magazine capacity with any OEM Double Stack GLOCK™ magazine for G19. The Extended Magazine Plate (EMP) provides an additional +5 rounds to any G19 GLOCK™ magazine. Included is our special steel locking plate, which compared to other magazine extensions on the market, features a hook design which adds extra locking security to increase reliability when fully loaded with rounds. WARNING: DO NOT OVERTIGHTEN set screw when installing the steel locking plate. Steel locking plate may appear "loose" however when the set screw is flush with the back of the EMP body, you do not have to tighten any more. Overtightening from this point on will potentially damage your product. See instructional video for proper installation of item. If you are unsure, please contact our customer support team or consult with your local gunsmith. Package includes: 1x Magazine Plate Extension for GLOCK™ G19 1x Extended length spring 1x Steel locking plate 1x Steel locking plate set screw Features: Plus 5 round capacity for 9mm Low drag/No snag design Impact-resistant polymer Includes Locking steel plate COMPATIBILITY: SI EMP Pocket Clip NOT COMPATIBLE: G23 (.40 Cal) 10-round magazines SI Grip Plug Tool For GLOCK™ for GEN3 or GEN4&5 NOTE: Not for sale to California residents due to 10-round state laws. The checkout process will show NO shipping method available. COMPATIBILITY: For GLOCK™ factory OEM G19 double stack magazines ETS Magazines that are over 10 rounds. Please note we cannot control or even be aware if ETS ever changes their design and the SI EMP no longer is compatible Magwell: tested to work with SI Magwell, Magpul and JP Enterprises It is the responsibility of the customer to know and abide with local gun laws. DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
ATTENZIONE: prima dell'acquisto leggi l'informativa che trovi nel banner giallo in homepage! Per ordinare scrivi a assistenzaclienti@brownells.it inviando copia di documenti in corso di validità che attestino l'appartenenza ad una delle categorie autorizzate all'acquisto.
32,90 € * 31,90 € - 2.299,90 €*
Newsletter