Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Scopri il montaggio perfetto per il tuo Trijicon RMR!
Il EAA WITNESS ELITE MATCH TRIJICON RMR SIGHT MOUNT è progettato per offrire una soluzione robusta e affidabile per il montaggio del tuo mirino red dot Trijicon RMR. Realizzato in alluminio 7075 con un rivestimento nero opaco, questo supporto è la scelta ideale per i tiratori esigenti.
Dettagli del prodotto:
- Materiale: Alluminio 7075
- Rivestimento: Nero opaco Hardcoat
- Dimensioni: Lunghezza totale: 1.780", Larghezza totale: 1.1"
- Hardware di montaggio: (2) Viti a testa piatta 6-32, (1) Vite di fissaggio 6-32 X 3/16
- Compatibilità: Trijicon RMR, Holosun HS507C
- Compatibile con: Baby Desert Eagle (Post 2006), EAA Witness Elite Match
- Non compatibile con: Rock Island 1911s
Istruzioni per l'installazione:
- Rimuovere il mirino posteriore*
- Installare il montaggio EGW nel dovetail
- Serrare la vite di fissaggio (se applicabile)
- Posizionare il mirino red dot sul montaggio EGW (mettere un piccolo pezzo di carta tra il mirino e il montaggio faciliterà la rimozione e proteggerà il mirino dall'Loctite)
- Applicare Loctite blu sulle viti di montaggio fornite
- Serrare le viti di montaggio a 15in/lbs
Le 2 viti a testa piatta sono fornite per il Trijicon RMR. Le viti incluse richiedono una chiave a brugola da 5/64'' per l'installazione.