The DDM4 V7 SLW AR15 style rifle is one of the lightest, fastest-handling rifles available in the DDM4 line-up, tipping the scales at under 6 lbs. Built around a Cold Hammer Forged, 14.5 inch Lightweight profile barrel, the V7 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16 inch minimum barrel length. The mid-length gas system provides smooth and reliable cycling under any conditions and reduces both perceived recoil and wear on moving parts. A free-floating MFR 13.5 M-LOK handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 SLW has plenty of room for the sights, optics, and accessories the operator may require. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip. FEATURES: LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5"" Lightweight Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP tested, Chrome Lined, Properly Staked Gas Key BUFFER: H Buffer SIGHTS: Sold Separately HANDGUARD: Daniel Defense MFR 13.5", CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding Made in the USA! SPECIFICATIONS: Mounting System - M-LOK Caliber - 5.56mm NATO Muzzle Thread - 1 ⁄ 2 × 28 TPI (Threads Per Inch) Gas System - Mid-length Barrel Length - 14.5" Barrel Profile - Lightweight Product Weight - 5.9 Length - 31 1/2” – 34 ¾” Magazine - DD Magazine with 32-round capacity in the same size magazine as industry-standard 30-round magazines Case - Daniel Defense Full-Latch Impact Plastic Case
Fucile semiautomatico DDM4 V7 SLW: leggero, veloce e affidabile!
Il fucile DDM4 V7 SLW in stile AR15 è uno dei fucili più leggeri e maneggevoli disponibili nella linea DDM4, con un peso inferiore a 6 lbs. Costruito attorno a un canna leggera profilo Cold Hammer Forged di 14,5 pollici, il V7 SLW è dotato di un estensore di flash che è fissato e saldato per raggiungere la lunghezza minima della canna di 16 pollici richiesta dalla NFA.
Il sistema a gas di lunghezza media offre un ciclo fluido e affidabile in qualsiasi condizione e riduce sia il rinculo percepito che l'usura delle parti in movimento. Un handguard MFR 13.5 M-LOK flottante offre un incredibile risparmio di peso, oltre a un raffreddamento, ergonomia e modularità superiori, mantenendo la forza e la durabilità attese da Daniel Defense.
Con i punti di attacco M-LOK che si estendono lungo 7 posizioni e un rail Picatinny 1913 ininterrotto nella parte superiore, il V7 SLW ha ampio spazio per i mirini, ottiche e accessori di cui l'operatore potrebbe aver bisogno. L'impugnatura di ricarica ambidestra GRIP-N-RIP si adatta a tiratori mancini e destri. Questo fucile è anche dotato di un calciolo ergonomico Daniel Defense e impugnatura a pistola.
Caratteristiche:
- LOWER RECEIVER: Mil-Spec con Enhanced Flared Magazine Well e punto di attacco QD Swivel sul retro. CNC Machined in Alluminio 7075-T6
- UPPER RECEIVER: Mil-Spec con segni di indicizzazione e M4 Feed Ramps. CNC Machined in Alluminio 7075-T6
- BARREL: Acciaio Chrome Moly Vanadium, Cold Hammer Forged, 1:7 Twist, 14.5" Lightweight Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, e HP/MPI Tested
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined in Acciaio 4140 indurito e rivestimento Mil-Spec Heavy Phosphate, Mid-length, Direct Impingement
- MUZZLE DEVICE: Pinned e Welded Daniel Defense Flash Suppressor, Extended, in Acciaio Inossidabile 17-4 PH, finitura Salt Bath Nitride
- BOLT CARRIER GROUP: Profilo M16, Mil-Spec MP tested, Chrome Lined, Gas Key correttamente fissato
- BUFFER: H Buffer
- SIGHTS: Venduti separatamente
- HANDGUARD: Daniel Defense MFR 13.5", CNC Machined in Alluminio 6061-T6, M-LOK Attachment, Type III Hard Coat Anodized
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, corpo CNC Machined in Alluminio 7075-T6, manici e gancio CNC Machined in Alluminio 6061-T6, perni a molla in acciaio inossidabile pesanti, Type III Hard Coat Anodized
- RECEIVER EXTENSION: Estensione Mil-Spec 7075-T6 in Alluminio a 6 posizioni
- BUTTSTOCK: Calciolo Daniel Defense, in Polimero rinforzato con vetro con rivestimento Soft Touch
- PISTOL GRIP: Impugnatura a pistola Daniel Defense, in Polimero rinforzato con vetro con rivestimento Soft Touch
Prodotto realizzato negli USA!
Specifiche:
- Mounting System: M-LOK
- Calibro: 5.56mm NATO
- Muzzle Thread: 1 ⁄ 2 × 28 TPI (Threads Per Inch)
- Gas System: Mid-length
- Barrel Length: 14.5"
- Barrel Profile: Lightweight
- Product Weight: 5.9 lbs
- Length: 31 1/2” – 34 ¾”
- Magazine: DD Magazine con capacità di 32 colpi nella stessa dimensione delle riviste standard da 30 colpi
- Case: Daniel Defense Full-Latch Impact Plastic Case
Aiuto e contatti
Newsletter
Visualizzazione classica
Visualizzazione mobile