Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Mount per Trijicon RMR per CZ SHADOW 2: qualità e precisione
Scopri il mount EGW per Trijicon RMR, progettato specificamente per il CZ SHADOW 2. Realizzato in 7075 Aluminum con una finitura Matte Black Hardcoat, questo accessorio è fondamentale per migliorare la tua esperienza di tiro.
Caratteristiche del prodotto:
- Materiale: 7075 Aluminum
- Rivestimento: Matte Black Hardcoat
- Lunghezza totale: 1.780"
- Larghezza totale: 1.1"
- Hardware di montaggio: (2) viti a testa piatta 6-32, (1) vite di bloccaggio 6-32 X 3/16
- Compatibilità: Trijicon RMR, Holosun HS507C
Questo mount è compatibile con:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
Nota: Questo mount non è compatibile con i modelli Rock Island 1911s.
Istruzioni per l'installazione:
- Rimuovi il mirino posteriore dalla tua arma*
- Installa il mount EGW nel dovetail
- Serra la vite di bloccaggio (se applicabile)
- Posiziona il red dot sight sul mount EGW (inserire un piccolo pezzo di carta tra il red dot sight e il mount faciliterà la rimozione e proteggerà il red dot sight dal Loctite)
- Applica Loctite blu sulle viti di montaggio fornite
- Serra le viti di montaggio a 15in/lbs
Nota: Le viti incluse richiedono una chiave a brugola da 5/64'' per l'installazione.