Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

Il die L.E. Wilson Bushing Full Length permette di dimensionare il collo della cartuccia e il corpo contemporaneamente, garantendo precisione e durata nel tempo.

L.E. WILSON MATRICE FULL-LENGTH 300 REMINGTON SAUM BUSHING

300 REMINGTON SAUM BUSHING FULL LENGTH DIE

815145026484 749018752
Varianti
Filtri:
Variations:

Varianti:

Cartuccia: 300 SAUM (Remington SA Ultra Mag) Matrice tipo: Bushing Full Length Die N. prodotto: 749018752
Non disponibile
124.54 EUR 0 124,54 € *
-5 %
Cartuccia: 308 Winchester Matrice tipo: Full Length Sizing Dies N. prodotto: 749016624
Acquistabile
174.9 EUR 5 174,90 € * 184,90 €
-5 %
Cartuccia: 6.5 x 47 mm Lapua N. prodotto: 749017490
Acquistabile
174.9 EUR 2 174,90 € * 184,90 €
-5 %
Cartuccia: 284 Winchester N. prodotto: 749017496
Acquistabile
174.9 EUR 2 174,90 € * 184,90 €
-5 %
Cartuccia: 30 BR (Benchrest) Remington N. prodotto: 749017499
Acquistabile
174.9 EUR 4 174,90 € * 184,90 €
-6 %
Cartuccia: 6mm PPC N. prodotto: 749017487
Acquistabile
169.9 EUR 2 169,90 € * 179,90 €
-5 %
Cartuccia: 6 mm Dasher N. prodotto: 749017485
Acquistabile
174.9 EUR 4 174,90 € * 184,90 €
-6 %
Cartuccia: 6.5 Creedmoor N. prodotto: 749017492
Acquistabile
169.9 EUR 8 169,90 € * 179,90 €
-5 %
Cartuccia: 6.5 mm - 284 Norma N. prodotto: 749017491
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
-5 %
Cartuccia: 22-250 Remington N. prodotto: 749017482
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
-5 %
Cartuccia: 6 mm BR Norma N. prodotto: 749017484
Acquistabile
174.9 EUR 4 174,90 € * 184,90 €
-5 %
Cartuccia: 6mm PPC Match N. prodotto: 749017489
Acquistabile
174.9 EUR 3 174,90 € * 184,90 €
-5 %
Cartuccia: 300 AAC Blackout N. prodotto: 749017498
Acquistabile
179.9 EUR 2 179,90 € * 189,90 €
-5 %
Cartuccia: 30-06 Springfield Matrice tipo: Bushing Full Length Die N. prodotto: 749018012
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
-5 %
Cartuccia: 300 WSM (Winchester Short Mag) Matrice tipo: Bushing Full Length Die N. prodotto: 749018015
Acquistabile
174.9 EUR 2 174,90 € * 184,90 €
-5 %
Cartuccia: 300 Remington Ultra Magnum Matrice tipo: Bushing Full Length Die N. prodotto: 749018751
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
-6 %
Cartuccia: 300 Winchester Magnum Matrice tipo: Bushing Full Length Die N. prodotto: 749018753
Acquistabile
169.9 EUR 3 169,90 € * 179,90 €
-5 %
Cartuccia: 338 Lapua Mag Matrice tipo: Bushing Full Length Die N. prodotto: 749018754
Acquistabile
179.9 EUR 3 179,90 € * 189,90 €
-5 %
Cartuccia: 7 mm SAUM (Remington SA Ultra Mag) Matrice tipo: Bushing Full Length Die N. prodotto: 749018756
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
-5 %
Matrice full-length con boccola 300 PRC 300 PRC BUSHING FULL LENGTH DIE
174.9 EUR 2 174,90 € * 184,90 €
Acquistabile
Cartuccia: 300 PRC Matrice tipo: Bushing Full Length Die N. prodotto: 749018870
Acquistabile
174.9 EUR 2 174,90 € * 184,90 €
-5 %
Matrice full-length con bussola 5.56MM 5.56MM BUSHING FULL LENGTH DIE
174.9 EUR 1 174,90 € * 184,90 €
Acquistabile
Cartuccia: 5.56 mm NAa Matrice tipo: Bushing Full Length Die N. prodotto: 749018866
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
Cartuccia: 6mm BR-A Matrice tipo: Bushing Full Length Die N. prodotto: 749018871
Cartuccia: 6mm XC II Matrice tipo: Bushing Full Length Die N. prodotto: 749018874
Cartuccia: 6.5 Grendel Matrice tipo: Bushing Full Length Die N. prodotto: 749018876
Cartuccia: 6.5 PRC Matrice tipo: Bushing Full Length Die N. prodotto: 749018875
Cartuccia: 6 mm ARC Matrice tipo: Bushing Full Length Die N. prodotto: 749018878
Cartuccia: 7 mm Remington Magnum Matrice tipo: Bushing Full Length Die N. prodotto: 749018877
Cartuccia: 25 Creedmoor Matrice tipo: Bushing Full Length Die N. prodotto: 430114479
Cartuccia: 6 GT Matrice tipo: Bushing Full Length Die N. prodotto: 430114480
Cartuccia: 7mm PRC Matrice tipo: Bushing Full Length Die N. prodotto: 430114481
Cartuccia: 22 Creedmoor Matrice tipo: Full Length Sizing Die N. prodotto: 430116132
Cartuccia: 22 PPC Matrice tipo: Full Length Sizing Die N. prodotto: 430116133
Cartuccia: 280 Ackley Improved Matrice tipo: Full Length Sizing Die N. prodotto: 430116134
Cartuccia: 223 Remington Matrice tipo: Full Length Sizing Dies N. prodotto: 749016621
Cartuccia: 28 Nosler Matrice tipo: Bushing Full Length Die N. prodotto: 749018869
Cartuccia: 280 Remington Matrice tipo: Full Length Sizing Die N. prodotto: 430116135
Cartuccia: 300 Norma Mag Matrice tipo: Full Length Sizing Die N. prodotto: 430116136
Cartuccia: 338 Norma Mag Matrice tipo: Full Length Sizing Die N. prodotto: 430116137
Cartuccia: 33 XC Matrice tipo: Full Length Sizing Die N. prodotto: 430116138
Cartuccia: 6.8 mm Western Matrice tipo: Full Length Sizing Die N. prodotto: 430116139
Cartuccia: 8.6 Blackout Matrice tipo: Full Length Sizing Die N. prodotto: 430116140
Cartuccia: 224 Valkyrie Matrice tipo: Bushing Full Length Die N. prodotto: 749018867
Cartuccia: 26 Nosler Matrice tipo: Bushing Full Length Die N. prodotto: 749018868
Cartuccia: 6 mm BRX Matrice tipo: Bushing Full Length Die N. prodotto: 749018872
159.9 189.9 46 EUR

Non disponibile.

N. prodotto: 749018752

N. fab.: FLD-3RSAUM

Avvisa quando diventa disponibile 124.54 EUR
159.9 189.9 46 EUR
Descrizione Specification Recensioni dei clienti Accessories

L.E. WILSON MATRICE FULL-LENGTH 300 REMINGTON SAUM BUSHING

Avvisa quando diventa disponibile

Descrizione:

Mostra originale (inglese)

Scopri la precisione con i dies a bushing full length di L.E. Wilson!

Il Wilson Bushing Type Full Length Sizing Die è progettato per offrirti la massima flessibilità nella ricarica delle munizioni. Questo die ti consente di dimensionare il collo della cartuccia secondo la tensione desiderata, mentre contemporaneamente dimensiona anche il resto del corpo della cartuccia.

Caratteristiche del prodotto:

  • Include un'asta di decapping ad altezza regolabile.
  • Un punzone di decapping extra è incluso.
  • Non contiene un espansore.
  • Realizzato in acciaio di alta qualità trattato termicamente.
  • I dies a bushing full length imitano il dimensionamento del collo dei dies di dimensionamento del collo di Wilson, lasciando 3/16” nella parte inferiore del collo della cartuccia non dimensionato, una pratica preferita da molti tiratori per una maggiore precisione.
  • Realizzato con materiali di alta qualità - indurito secondo le specifiche L.E. Wilson.
  • Più duro di un bullone di grado 8.
  • Bushings intercambiabili.
  • Compatibile con presse di ricarica standard da 7/8 pollici.
  • Dimensiona le dimensioni della spalla e del corpo.
  • Parti in acciaio inossidabile per una finitura durevole e a lungo termine.
  • Chiusura a dado L.E. Wilson, spessore di .225" dal bordo interno al bordo esterno, altezza di .270" e larghezza totale OD di 1.250".
  • Il neck bushing è venduto separatamente; si consiglia di utilizzare i neck bushings L.E. Wilson, ma i bushings Redding sono compatibili.

Affidati a L.E. Wilson per un'esperienza di ricarica senza pari!



Caratteristiche

  • Cartuccia:
    300 SAUM (Remington SA Ultra Mag)
  • Matrice tipo:
    Bushing Full Length Die
  • Peso della spedizione: 0,27kg
  • Altezza di spedizione: 44mm
  • Larghezza di spedizione: 51mm
  • Lunghezza di spedizione: 152mm
  • UPC: 815145026484

Dettagli dell'elemento

Made in Usa

Recensioni dei clienti

Valutazioni dei clienti (1)

4 / 5
Raccomandato

Brownells USA Great Die . . . . but 03/08/2018

This is a terrific die! Don't get me wrong. It was easy to get set up by following the instructions, no problem there. It sizes cases very consistently and saves me a couple of steps in the prep department. The problem I had was that alignment of the cartridge in the case holder was critical. If the cartridge was not precisely aligned, the flat at the bottom of the decapping rod would catch the top of the case neck and bend a chunk of it inward. RIP expensive cartridge. I resolved that problem by chucking the decapping rod into the lathe and making a radius to the decapping pin. Problem solved. Gonna get one of these for my 30BR too!!

Varianti:

Cartuccia: 300 SAUM (Remington SA Ultra Mag) Matrice tipo: Bushing Full Length Die N. prodotto: 749018752
Non disponibile
124.54 EUR 0 124,54 € *
-5 %
Cartuccia: 308 Winchester Matrice tipo: Full Length Sizing Dies N. prodotto: 749016624
Acquistabile
174.9 EUR 5 174,90 € * 184,90 €
-5 %
Cartuccia: 6.5 x 47 mm Lapua N. prodotto: 749017490
Acquistabile
174.9 EUR 2 174,90 € * 184,90 €
-5 %
Cartuccia: 284 Winchester N. prodotto: 749017496
Acquistabile
174.9 EUR 2 174,90 € * 184,90 €
-5 %
Cartuccia: 30 BR (Benchrest) Remington N. prodotto: 749017499
Acquistabile
174.9 EUR 4 174,90 € * 184,90 €
-6 %
Cartuccia: 6mm PPC N. prodotto: 749017487
Acquistabile
169.9 EUR 2 169,90 € * 179,90 €
-5 %
Cartuccia: 6 mm Dasher N. prodotto: 749017485
Acquistabile
174.9 EUR 4 174,90 € * 184,90 €
-6 %
Cartuccia: 6.5 Creedmoor N. prodotto: 749017492
Acquistabile
169.9 EUR 8 169,90 € * 179,90 €
-5 %
Cartuccia: 6.5 mm - 284 Norma N. prodotto: 749017491
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
-5 %
Cartuccia: 22-250 Remington N. prodotto: 749017482
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
-5 %
Cartuccia: 6 mm BR Norma N. prodotto: 749017484
Acquistabile
174.9 EUR 4 174,90 € * 184,90 €
-5 %
Cartuccia: 6mm PPC Match N. prodotto: 749017489
Acquistabile
174.9 EUR 3 174,90 € * 184,90 €
-5 %
Cartuccia: 300 AAC Blackout N. prodotto: 749017498
Acquistabile
179.9 EUR 2 179,90 € * 189,90 €
-5 %
Cartuccia: 30-06 Springfield Matrice tipo: Bushing Full Length Die N. prodotto: 749018012
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
-5 %
Cartuccia: 300 WSM (Winchester Short Mag) Matrice tipo: Bushing Full Length Die N. prodotto: 749018015
Acquistabile
174.9 EUR 2 174,90 € * 184,90 €
-5 %
Cartuccia: 300 Remington Ultra Magnum Matrice tipo: Bushing Full Length Die N. prodotto: 749018751
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
-6 %
Cartuccia: 300 Winchester Magnum Matrice tipo: Bushing Full Length Die N. prodotto: 749018753
Acquistabile
169.9 EUR 3 169,90 € * 179,90 €
-5 %
Cartuccia: 338 Lapua Mag Matrice tipo: Bushing Full Length Die N. prodotto: 749018754
Acquistabile
179.9 EUR 3 179,90 € * 189,90 €
-5 %
Cartuccia: 7 mm SAUM (Remington SA Ultra Mag) Matrice tipo: Bushing Full Length Die N. prodotto: 749018756
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
-5 %
Matrice full-length con boccola 300 PRC 300 PRC BUSHING FULL LENGTH DIE
174.9 EUR 2 174,90 € * 184,90 €
Acquistabile
Cartuccia: 300 PRC Matrice tipo: Bushing Full Length Die N. prodotto: 749018870
Acquistabile
174.9 EUR 2 174,90 € * 184,90 €
-5 %
Matrice full-length con bussola 5.56MM 5.56MM BUSHING FULL LENGTH DIE
174.9 EUR 1 174,90 € * 184,90 €
Acquistabile
Cartuccia: 5.56 mm NAa Matrice tipo: Bushing Full Length Die N. prodotto: 749018866
Acquistabile
174.9 EUR 1 174,90 € * 184,90 €
Cartuccia: 6mm BR-A Matrice tipo: Bushing Full Length Die N. prodotto: 749018871
Cartuccia: 6mm XC II Matrice tipo: Bushing Full Length Die N. prodotto: 749018874
Cartuccia: 6.5 Grendel Matrice tipo: Bushing Full Length Die N. prodotto: 749018876
Cartuccia: 6.5 PRC Matrice tipo: Bushing Full Length Die N. prodotto: 749018875
Cartuccia: 6 mm ARC Matrice tipo: Bushing Full Length Die N. prodotto: 749018878
Cartuccia: 7 mm Remington Magnum Matrice tipo: Bushing Full Length Die N. prodotto: 749018877
Cartuccia: 25 Creedmoor Matrice tipo: Bushing Full Length Die N. prodotto: 430114479
Cartuccia: 6 GT Matrice tipo: Bushing Full Length Die N. prodotto: 430114480
Cartuccia: 7mm PRC Matrice tipo: Bushing Full Length Die N. prodotto: 430114481
Cartuccia: 22 Creedmoor Matrice tipo: Full Length Sizing Die N. prodotto: 430116132
Cartuccia: 22 PPC Matrice tipo: Full Length Sizing Die N. prodotto: 430116133
Cartuccia: 280 Ackley Improved Matrice tipo: Full Length Sizing Die N. prodotto: 430116134
Cartuccia: 223 Remington Matrice tipo: Full Length Sizing Dies N. prodotto: 749016621
Cartuccia: 28 Nosler Matrice tipo: Bushing Full Length Die N. prodotto: 749018869
Cartuccia: 280 Remington Matrice tipo: Full Length Sizing Die N. prodotto: 430116135
Cartuccia: 300 Norma Mag Matrice tipo: Full Length Sizing Die N. prodotto: 430116136
Cartuccia: 338 Norma Mag Matrice tipo: Full Length Sizing Die N. prodotto: 430116137
Cartuccia: 33 XC Matrice tipo: Full Length Sizing Die N. prodotto: 430116138
Cartuccia: 6.8 mm Western Matrice tipo: Full Length Sizing Die N. prodotto: 430116139
Cartuccia: 8.6 Blackout Matrice tipo: Full Length Sizing Die N. prodotto: 430116140
Cartuccia: 224 Valkyrie Matrice tipo: Bushing Full Length Die N. prodotto: 749018867
Cartuccia: 26 Nosler Matrice tipo: Bushing Full Length Die N. prodotto: 749018868
Cartuccia: 6 mm BRX Matrice tipo: Bushing Full Length Die N. prodotto: 749018872

Lo sapevi?

Informazioni sul produttore

Operatore economico responsabile secondo il regolamento UE

Brownells Italia srl
Via Dante Alighieri 163
25068 Sarezzo
Italia
service@brownells.it

Ops! Qualcosa è andato storto.

Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.

Torna all'inizio