Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Mount per mira red dot Trijicon RMR di alta qualità
Il BOMAR TRIJICON RMR SIGHT MOUNT è progettato per offrire una soluzione robusta e affidabile per montare la tua mira red dot Trijicon RMR o Holosun HS507C.
Caratteristiche del prodotto:
- Materiale: Alluminio 7075
- Rivestimento: Nero opaco Hardcoat
- Dimensioni: Lunghezza totale: 1.780", Larghezza totale: 1.1"
- Hardware di montaggio: (2) viti a testa piatta 6-32, (1) vite di bloccaggio 6-32 X 3/16
Compatibilità:
Questo mount si adatta a:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
Questo mount non si adatta a:
Istruzioni per l'installazione:
- Rimuovere la mira posteriore*
- Installare il mount EGW nella slitta
- Serrare la vite di bloccaggio (se applicabile)
- Posizionare la mira red dot sul mount EGW (mettere un piccolo pezzo di carta tra la mira red dot e il mount faciliterà la rimozione e impedirà il contatto con il Loctite).
- Applicare Loctite blu sulle viti di montaggio fornite
- Serrare le viti di montaggio a 15in/lbs
Le viti a testa piatta fornite sono compatibili con Trijicon RMR e richiedono una chiave a brugola da 5/64'' per l'installazione.