Caratteristiche
- Modello:
700
- Tipo di arma:
Remington
- Peso della spedizione: 0,068kg
- Altezza di spedizione: 8mm
- Larghezza di spedizione: 71mm
- Lunghezza di spedizione: 147mm
- UPC: 050806008366
N. prodotto: 080097700
050806008366 Lo strumento a molla fornisce una pressione costante e diretta per mantenere i lobi del bullone perpendicolari al ricevitore durante la lappatura con abrasivo in carburo di silicio da 600 a 800 grana. Fornisce risultati migliori rispetto alla semplice pressione delle dita. I manicotti a vite intercambiabili si adattano alle azioni popolari elencate di seguito.Tempi di consegna circa 12-16 giorni.
Gli Strumenti di Lappatura BOLT con manicotto filettato sono progettati esclusivamente per il Remington 700. Questo strumento a molla offre una pressione costante e diretta per mantenere i lugs del bolt perfettamente allineati contro il ricevitore durante la lappatura con abrasivi in carburo di silicio da 600 a 800 grit.
Il set per M14/M1A include un plunger di grande diametro e un manico di lappatura speciale necessari per questi modelli. Il manicotto grande Mauser si adatta alle azioni Mauser a grande anello, mentre il manicotto piccolo si adatta alle azioni Mauser a piccolo anello. Il manicotto piccolo Savage si adatta alle azioni Savage in tutti i calibri tranne Rem Ultra Mag (RUM), Rem SA Ultra Mag (RSUM) e Win Short Mag (WSM). Il manicotto grande Savage si adatta solo alle azioni Savage nei calibri RUM, RSUM e WSM.
Un set per una sola arma contiene il corpo dello strumento per il bolt, il plunger e il manicotto della dimensione corretta per il modello indicato. Il set per M14/M1A contiene il corpo dello strumento per il bolt, il plunger di grande diametro, il manicotto della dimensione corretta e uno speciale strumento di lappatura per bolt unico per M14/M1A/M1 Garand. Il kit include tutti gli strumenti necessari per lappare tutti i modelli elencati nella tabella.
*Prezzo speciale, vedere qui sotto.
700
Remington
Very nice fit of parts. 31/08/2015
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.
Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.