Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

Il gas block in acciaio leggero e regolabile consente di ottimizzare l'estrazione e l'espulsione, senza forare il tubo del gas e si adatta a tubi free float.

PRECISION REFLEX ADJUSTABLE LOW-PROFILE GAS BLOCK

090222552715 714000019

Caratteristiche

  • Diametro interno: .750
  • Materiale: Acciaio
  • Tipo: Low-Profile
  • Tipo di arma: AR-15
  • Peso della spedizione: 0,059kg
  • Altezza di spedizione: 25mm
  • Larghezza di spedizione: 83mm
  • Lunghezza di spedizione: 146mm
  • UPC: 090222552715

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x
  • Specifiche:
  • Adatto per: AR-15
  • Diametro interno: .750
  • Materiale: Acciaio
  • Tipo: Low-Profile
0 0 1 EUR

Descrizione:

Mostra originale (inglese)

Blocco gas regolabile a profilo basso AR-15 per prestazioni ottimali.

Il blocco gas in acciaio leggero presenta una porta gas regolabile che consente di sintonizzare la quantità di gas per un'estrazione e un'espulsione affidabili, in base alle munizioni utilizzate.

Caratteristiche principali:

  • La vite di regolazione chiude o apre la porta nel blocco, senza influenzare il tubo gas; non è necessaria la foratura del tubo gas.
  • Si adatta sotto i tubi free float e non interferisce con la visione attraverso ottiche o mirini a punto rosso.
  • Doppie viti di bloccaggio sul fondo del blocco fissano saldamente il blocco al barile.

Specifiche:

Materiale: Acciaio, anodizzato hardcoat, finitura nera opaca.
Dimensioni: 1" (2.5cm) di lunghezza, 1.37" (3.4cm) di altezza, peso 1 oz. (28g).
Compatibilità: Si adatta a barili con diametro esterno di .750" nella posizione del blocco gas.



Caratteristiche

  • Diametro interno: .750
  • Materiale: Acciaio
  • Tipo: Low-Profile
  • Tipo di arma: AR-15
  • Peso della spedizione: 0,059kg
  • Altezza di spedizione: 25mm
  • Larghezza di spedizione: 83mm
  • Lunghezza di spedizione: 146mm
  • UPC: 090222552715

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

Recensioni dei clienti

Valutazioni dei clienti (3)

3,3 / 5
Assolutamente raccomandato

Brownells USA Great product made my AR-47 run PERFECT 09/01/2016

I bout a fully assembled 7.62X39 upper with a 7" barrel. From the factory named from a Florida city (state armory) and it did not work at all (& they were not supportive). I went through different buffer weights up to 9mm with no luck. I installed this adjustable gas block and have fired 240 rounds today with no stoppage. Start with the gas adjusting screw in and move it one turn out until your AR cycles to remove the shot round and feed the next. Then go at a half turn more (1-1/2 was too much) This worked for me.

Raccomandato

Brownells USA Precision Reflex 07/06/2015

This is a great product if you do your homework and pre-fit\measure all aspects prior to permanently installing it. The one gotcha would be gas hole alignment. If your barrel's gas hole was drilled with the assumption that you will be using a fore end cap then you must shim the gas block out from the shoulder to get gas hole alignment. Also, pre-check the gas tube fit and gas hole alignment as well as open up the gas adjustment screw all the way to expose the hole and make it easy to get visual gas hole alignment. The .750 size fit was perfect on my CMMG barrel which I pre-tested. I selected this gas block because the adjusment screw faces the front and not to the rear of the rifle. I gave it 4 stars because there is always room for improvement.

Lo sapevi?

Informazioni sul produttore

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Ops! Qualcosa è andato storto.

Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.

Torna all'inizio