Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

Le maniche di bedding regolabili si installano facilmente e si adattano a quasi tutti i tipi di calci, senza necessità di tagli o lavorazioni aggiuntive.

BROWNELLS ADJUSTABLE PILLAR BEDDING SLEEVE

080910000

Caratteristiche

  • Peso della spedizione: 0,027kg

Dettagli dell'elemento

Made in Usa
0 0 1 EUR

Non disponibile.

N. prodotto: 080910000

Avvisa quando diventa disponibile 38.9 EUR

Descrizione:

Mostra originale (inglese)

Scopri la versatilità delle maniche di bedding regolabili!

Le maniche di bedding completamente regolabili sono facili da installare e si adattano a quasi tutti i tipi e dimensioni di calci. Leggere e con anelli di regolazione pre-contornati, si muovono su un albero completamente filettato, permettendoti di adattarle per una vestibilità esatta senza tagli, limature o lavorazioni aggiuntive che richiedono tempo.

Dettagli del prodotto

  • Vendute in coppia: lunga per la vite posteriore, corta per la vite anteriore.
  • SPECIFICHE:
    • Manica - acciaio, .296" (7.5mm) ID, 7/16"-20 tpi.
    • Anello di regolazione - alluminio, .560" (14mm) OD.
    • Anteriore - .700" (17mm) lungo.
    • Posteriore - 1.16" (2.9cm) lungo.
  • Nota: L'installazione richiede modifiche al calcio e al bedding sintetico. Vendute solo in coppie.


Caratteristiche

  • Peso della spedizione: 0,027kg

Dettagli dell'elemento

Made in Usa

Recensioni dei clienti

Valutazioni dei clienti (2)

5 / 5
Assolutamente raccomandato

Brownells USA Phenomenal Product! 04/08/2013

I recently used these for the first time on a Win Model 70 Super Grade, CRF, made in the 80's out of the CT plant. I have used Brownell's Acraglass Gel with steel ferrels for pillars for years on other rifles, but decided to try these adjustable pillars for this project. As the previous reviewer stated, getting the holes drilled precisely is critical. I used a 1/2" bit, then a Dremmel tool to enlarge the holes, so that the pillars just slid in an out of the stock. This allowed me to adjust them precisely before gluing in place and making the final adjustments to the sleeve. What is so great about this product is that you can precisely adjust the pillars to get the action of your rifle to lay perfectly in the stock with a perfect free float. Of course then I glass bedded the action, tang, and floor plate area. If you take your time, the product is very easy to use and the results will astound you as to how accurate a factory rifle can be when bedded properly.

Assolutamente raccomandato

Brownells USA Works great. 20/06/2012

I used these to pillar bed a pre 64 Winchester. They are great for someone who is doing a home job. They adjust a little to easy and would move when being placed in the hole. A dab of grease on the thread where the nuts are sitting will help. Make sure you have the correct size Forstner bit. I could not find a single local store that carries this size (9/16). If I could do it again I would get the piloted Forstner bit sold by Brownells (Stock #:080-909-000WB). It is not cheap, but it cost the same as a local machinist charged me to drill the holes in my stock. You could do it with a hand drill at home but these holes must be perfectly straight or you are defeating the purpose.

Lo sapevi?

Informazioni sul produttore

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Ops! Qualcosa è andato storto.

Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.

Torna all'inizio