Screws Onto Recoil Spring To Prevent Loss Of Plug During Disassembly
Machined steel recoil plug has mil-spec flange punched into the side so the recoil spring can be wound into the plug before seating in the slide. Prevents the plug from flying off spring during field stripping and getting lost or hitting the operator, possibly causing injury. Precision-turned for proper fit in full-size Government model pistols, with flat, diamond-pattern knurling on the front. If you lose the plug, your gun can t operate, and you re done for the day. Keep one or two of these in your range box or field maintenance kit for backup.
Si Avvita Alla Molla Di Rinculo Per Prevenire La Perdita Del Tappo Durante Lo Smontaggio
Il tappo di rinculo in acciaio lavorato ha una flangia mil-spec forgiata sul lato, permettendo di avvolgere la molla di rinculo attorno al tappo prima di posizionarlo nella carrello. Questo previene che il tappo si sganci dalla molla durante lo smontaggio sul campo e si perda o colpisca l'operatore, causando potenzialmente infortuni. Realizzato con precisione per adattarsi perfettamente alle pistole modello Government full-size, con zigrinatura piatta a forma di diamante sulla parte frontale. Se perdi il tappo, la tua arma non può funzionare e la tua giornata di tiro è compromessa. Tieni uno o due di questi nella tua scatola da tiro o nel kit di manutenzione da campo come riserva.
SPECIFICHE: Acciaio, brunito. Lunghezza 1½ (3.8cm), diametro esterno .495 (12.6mm). Adatto per modelli Government mil-spec.
Altro...
Punteggi dei clienti per CYLINDER & SLIDE MIL-SPEC RECOIL SPRING PLUG
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4,7
This plug Rocks(23/08/2009)
This is the plug all 1911s should have. Just like John Moses Browning intended. The key is the flange that allows the recoil spring to screw into the plug, keeping the plug in place when field stripping your 1911. No more flying plugs, and no more crawling on the floor in the corner to retrieve it. Add to that the typical high quality and beautifully done checkering, and you have the plug that should have come in your 1911 to begin with. There is one downside, no stainless steel. Are you listening Bill?
EXCELLENT REPLACEMENT!!!(23/03/2010)
Dont wait. Order it now and replace that nasty Springfield government one it came with. This item is perfect and fits a heck of alot better than the factory part.
Flange works great(18/11/2011)
The punched flange allows you to "screw" the recoil spring on to the plug so that when you go to field strip, the plug is less likely to go airborn. I like the old-school look of the diamond knurling and it looks great my TRP. The fact that it comes from Cylinder and Slide means it's top-notch.
Great Idea!(17/12/2011)
This is a great recoil spring plug. Anyone who has ever accidentally launched one across the room while disassembling a 1911 will immediately appreciate this product. Too bad Cylinder & Slide doesn't make them for the Combat Commander. I'm going to have to trim the last one I ordered with a tubing cutter to use it in my Commander.
Original Spec is Still the Best(27/10/2013)
This plug captures the recoil spring, just as the original 1911 plans specified, making field stripping easier by keeping parts together.
Somehow this thoughtful detail isn't standard anymore, even with higher end 1911s. But at least replacing your recoils spring plug with this part is easy and inexpensive.
Bluing is very dark, almost black.
Looks nice(02/10/2014)
I had planned to replace the full length guide rod & plug in my RIA 1911, since it makes field stripping a PITA. The C&S part looked fantastic with a nice satin blued finish. Then I measured it with my digital micrometer. The ordinance specifications for the recoil plug is 0.4985"+0/-0.005". The C&S part measured 0.4946-0.4957". So the plug is in spec, but a bit egg shaped.
Worth 3 times the money(15/05/2015)
I've purchased 2 of these. One is in my 1911 Government model and one is in my Commander.
The one for the Commander was easily trimmed down to length with a standard tubing cutter.
These plugs make it so much easier to field strip with out the possibility of having to chase the plug all over the place.
N. prodotto: 206000042 CYLINDER & SLIDE MIL-SPEC RECOIL SPRING PLUG Parti Fabbricante: CS0437000000004374 Il tappo di rinculo in acciaio lavorato ha una flangia mil-spec forgiata sul lato, permettendo di avvolgere la molla di rinculo attorno al tappo prima di posizionarlo nella carrello. Questo previene che il tappo si sganci dalla molla durante lo smontaggio sul campo e si perda o colpisca l'operatore, causando potenzialmente infortuni. Realizzato con precisione per adattarsi perfettamente alle pistole modello Government full-size, con zigrinatura piatta a forma di diamante sulla parte frontale. Se perdi il tappo, la tua arma non può funzionare e la tua giornata di tiro è compromessa. Tieni uno o due di questi nella tua scatola da tiro o nel kit di manutenzione da campo come riserva.
24.9EUR024,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: 1911Modello: Government
Adatto per:
1911
Modello:
Government
Peso della spedizione: 0,009kgLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Screws Onto Recoil Spring To Prevent Loss Of Plug During Disassembly
Machined steel recoil plug has mil-spec flange punched into the side so the recoil spring can be wound into the plug before seating in the slide. Prevents the plug from flying off spring during field stripping and getting lost or hitting the operator, possibly causing injury. Precision-turned for proper fit in full-size Government model pistols, with flat, diamond-pattern knurling on the front. If you lose the plug, your gun can t operate, and you re done for the day. Keep one or two of these in your range box or field maintenance kit for backup.
Si Avvita Alla Molla Di Rinculo Per Prevenire La Perdita Del Tappo Durante Lo Smontaggio
Il tappo di rinculo in acciaio lavorato ha una flangia mil-spec forgiata sul lato, permettendo di avvolgere la molla di rinculo attorno al tappo prima di posizionarlo nella carrello. Questo previene che il tappo si sganci dalla molla durante lo smontaggio sul campo e si perda o colpisca l'operatore, causando potenzialmente infortuni. Realizzato con precisione per adattarsi perfettamente alle pistole modello Government full-size, con zigrinatura piatta a forma di diamante sulla parte frontale. Se perdi il tappo, la tua arma non può funzionare e la tua giornata di tiro è compromessa. Tieni uno o due di questi nella tua scatola da tiro o nel kit di manutenzione da campo come riserva.
SPECIFICHE: Acciaio, brunito. Lunghezza 1½ (3.8cm), diametro esterno .495 (12.6mm). Adatto per modelli Government mil-spec.
Altro...
Punteggi dei clienti per CYLINDER & SLIDE MIL-SPEC RECOIL SPRING PLUG
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4,7
This plug Rocks(23/08/2009)
This is the plug all 1911s should have. Just like John Moses Browning intended. The key is the flange that allows the recoil spring to screw into the plug, keeping the plug in place when field stripping your 1911. No more flying plugs, and no more crawling on the floor in the corner to retrieve it. Add to that the typical high quality and beautifully done checkering, and you have the plug that should have come in your 1911 to begin with. There is one downside, no stainless steel. Are you listening Bill?
EXCELLENT REPLACEMENT!!!(23/03/2010)
Dont wait. Order it now and replace that nasty Springfield government one it came with. This item is perfect and fits a heck of alot better than the factory part.
Flange works great(18/11/2011)
The punched flange allows you to "screw" the recoil spring on to the plug so that when you go to field strip, the plug is less likely to go airborn. I like the old-school look of the diamond knurling and it looks great my TRP. The fact that it comes from Cylinder and Slide means it's top-notch.
Great Idea!(17/12/2011)
This is a great recoil spring plug. Anyone who has ever accidentally launched one across the room while disassembling a 1911 will immediately appreciate this product. Too bad Cylinder & Slide doesn't make them for the Combat Commander. I'm going to have to trim the last one I ordered with a tubing cutter to use it in my Commander.
Original Spec is Still the Best(27/10/2013)
This plug captures the recoil spring, just as the original 1911 plans specified, making field stripping easier by keeping parts together.
Somehow this thoughtful detail isn't standard anymore, even with higher end 1911s. But at least replacing your recoils spring plug with this part is easy and inexpensive.
Bluing is very dark, almost black.
Looks nice(02/10/2014)
I had planned to replace the full length guide rod & plug in my RIA 1911, since it makes field stripping a PITA. The C&S part looked fantastic with a nice satin blued finish. Then I measured it with my digital micrometer. The ordinance specifications for the recoil plug is 0.4985"+0/-0.005". The C&S part measured 0.4946-0.4957". So the plug is in spec, but a bit egg shaped.
Worth 3 times the money(15/05/2015)
I've purchased 2 of these. One is in my 1911 Government model and one is in my Commander.
The one for the Commander was easily trimmed down to length with a standard tubing cutter.
These plugs make it so much easier to field strip with out the possibility of having to chase the plug all over the place.