Low Profile, No-Snag Design For Self Defense Pistols
No sharp edges to drag on holsters or snag clothing because these low profile sights are designed specifically for concealed carry. EDM machined from 4140 steel, then heat-treated to Rc 38-40 and vacuum tempered. Fully Adjustable (Adj.) models are click-adjustable for windage and elevation. Serrated (Sert.) models feature fine line serrations on the rear surface of the sight. Available to fit 1911 pistols equipped with Novak low mount style dovetail.
Design a basso profilo senza spigoli per pistole da difesa personale
Nessun bordo tagliente che possa impigliarsi nelle fondine o agganciare i vestiti, poiché questi mirini a basso profilo sono progettati specificamente per il porto occultato. Sono lavorati con EDM da acciaio 4140, poi trattati termicamente a Rc 38-40 e temperati al vuoto. I modelli completamente regolabili (Adj.) sono regolabili con click per deriva e alzo. I modelli zigrinati (Sert.) presentano zigrinature a linee sottili sulla superficie posteriore del mirino. Disponibili per pistole 1911 equipaggiate con taglio a coda di rondine stile Novak low mount.
SPECS: Acciaio 4140, finitura blu, opaca. Lo-Mount - adatto per taglio a coda di rondine stile Novak 65° x .495”.
Altro...
Punteggi dei clienti per KENSIGHT MFG LOW MOUNT, ADJ./SERT.
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
Very happy(09/07/2011)
I installed this rear sight on an RIA Tactical 45. My slide was already cut for a Novak Low Mount sight, so only minimal fitting was required. Not a "drop in" wich is a plus in my book, I was able to get a nice tight fit in about an hour. I like having the low mount defensive sight profile in an adjustable sight, and the serrations reduce glare very well. I paired this rear sight with a Kensight front and I really like the combo, I get a nice sharp sight picture. This set up is ideal for my purposes wich includes pin shooting and defense. I have'nt put alot of rounds through my pistol(less than 1000) with this sight, but so far it seems to be holding up just fine. I am very happy with my experiance so far.
N. prodotto: 100002640 KENSIGHT MFG LOW MOUNT, ADJ./SERT. Parti Fabbricante: 860618755377866185 Nessun bordo tagliente che possa impigliarsi nelle fondine o agganciare i vestiti, poiché questi mirini a basso profilo sono progettati specificamente per il porto occultato. Sono lavorati con EDM da acciaio 4140, poi trattati termicamente a Rc 38-40 e temperati al vuoto. I modelli completamente regolabili (Adj.) sono regolabili con click per deriva e alzo. I modelli zigrinati (Sert.) presentano zigrinature a linee sottili sulla superficie posteriore del mirino. Disponibili per pistole 1911 equipaggiate con taglio a coda di rondine stile Novak low mount.
124.9EUR2124,90 €
*
Tempi di consegna circa 12-16 giorni. 2 pz. nel magazzino USA
Adatto per:
1911
Colore delle mire:
Black
Modello:
Commander,Government,Officers
Tipo:
Regolabili,Low-Profile
Peso della spedizione: 0,005kgAltezza di spedizione: 8mmLarghezza di spedizione: 64mmLunghezza di spedizione: 107mm
Low Profile, No-Snag Design For Self Defense Pistols
No sharp edges to drag on holsters or snag clothing because these low profile sights are designed specifically for concealed carry. EDM machined from 4140 steel, then heat-treated to Rc 38-40 and vacuum tempered. Fully Adjustable (Adj.) models are click-adjustable for windage and elevation. Serrated (Sert.) models feature fine line serrations on the rear surface of the sight. Available to fit 1911 pistols equipped with Novak low mount style dovetail.
Design a basso profilo senza spigoli per pistole da difesa personale
Nessun bordo tagliente che possa impigliarsi nelle fondine o agganciare i vestiti, poiché questi mirini a basso profilo sono progettati specificamente per il porto occultato. Sono lavorati con EDM da acciaio 4140, poi trattati termicamente a Rc 38-40 e temperati al vuoto. I modelli completamente regolabili (Adj.) sono regolabili con click per deriva e alzo. I modelli zigrinati (Sert.) presentano zigrinature a linee sottili sulla superficie posteriore del mirino. Disponibili per pistole 1911 equipaggiate con taglio a coda di rondine stile Novak low mount.
SPECS: Acciaio 4140, finitura blu, opaca. Lo-Mount - adatto per taglio a coda di rondine stile Novak 65° x .495”.
Altro...
Punteggi dei clienti per KENSIGHT MFG LOW MOUNT, ADJ./SERT.
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
Very happy(09/07/2011)
I installed this rear sight on an RIA Tactical 45. My slide was already cut for a Novak Low Mount sight, so only minimal fitting was required. Not a "drop in" wich is a plus in my book, I was able to get a nice tight fit in about an hour. I like having the low mount defensive sight profile in an adjustable sight, and the serrations reduce glare very well. I paired this rear sight with a Kensight front and I really like the combo, I get a nice sharp sight picture. This set up is ideal for my purposes wich includes pin shooting and defense. I have'nt put alot of rounds through my pistol(less than 1000) with this sight, but so far it seems to be holding up just fine. I am very happy with my experiance so far.