Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia
811291030023 100061466
Mountain Tactical Company is proud to announce our Gen3 Elite Series Stainless Steel Recoil lugs for your Tikka T3 and Tikka T3x rifle. Mountain Tactical’s latest generation of recoil lugs are a significant upgrade from the second generation of lugs.  Previously, we used 316 marine grade stainless steel which had a yield strength of 89,000 psi.  This was a major improvement from the factory aluminum lug which has a yield strength of 21,000 psi or the T3x mild steel lug which has a yield strength of 36,000 psi (significantly less than the standard psi generated by modern rifle cartridges).  Now we have upgraded the stainless steel we use to 17-4PH H900 stainless steel.  The yield strength of this remarkable steel is 200,000 psi. That is 33% stronger than Grade 5 Titanium! Mountain Tactical proudly manufactures their Gen3 Elite Series Stainless Steel Recoil Lugs from 17-4PH H900 Stainless Steel for the ultimate in weather resistance and a lifetime of service. Installation is simple.  Simply remove the two action screws and separate your action from the stock.  Using a pair of pliers, remove the existing metal piece from the stock.  Then push the Elite Series Recoil Lug into the same recess.  Put your action and stock back together and tighten your action screws.  You are done! Note that sometimes it can take a little longer to line up your action and stock because of the tighter tolerances of the recoil lug. The Mountain Tactical Company Elite Series Recoil Lugs for the Tikka T3 are of the finest quality you will find anywhere.
59.9 59.9 1 EUR
N. prodotto: 100061466
MOUNTAIN TACTICAL T3/T3X LUG
Parti Fabbricante: T3T3XESL 811291030023 Mountain Tactical Company è orgogliosa di presentare i nostri controllori di rinculo in acciaio inossidabile Serie Elite Gen3 per il vostro fucile Tikka T3 e Tikka T3x. I controllori di rinculo di ultima generazione di Mountain Tactical rappresentano un significativo miglioramento rispetto alla seconda generazione di controllori. In precedenza, utilizzavamo acciaio inossidabile marino di grado 316 con una resistenza allo snervamento di 89.000 psi. Questo rappresentava un grande miglioramento rispetto al controlloro di rinculo in alluminio di fabbrica che ha una resistenza allo snervamento di 21.000 psi o al controlloro di rinculo in acciaio dolce T3x con una resistenza di 36.000 psi (significativamente inferiore allo standard psi generato dalle moderne cartucce da fucile). Ora abbiamo migliorato l'acciaio inossidabile utilizzato al 17-4PH H900. La resistenza allo snervamento di questo straordinario acciaio è di 200.000 psi. Questo è il 33% più forte del Titanio di Grado 5! Mountain Tactical produce con orgoglio i loro controllori di rinculo in acciaio inossidabile Serie Elite Gen3 in acciaio inossidabile 17-4PH H900 per la massima resistenza alle intemperie e una lunga durata. L'installazione è semplice. Basta rimuovere le due viti di azionamento e separare l'azione dal calcio. Utilizzando un paio di pinze, rimuovere il pezzo metallico esistente dal calcio. Poi inserire il controlloro di rinculo Serie Elite nello stesso incavo. Rimettere insieme l'azione e il calcio e stringere le viti di azionamento. E il gioco è fatto! Si noti che a volte può essere necessario un po' più di tempo per allineare l'azione e il calcio a causa delle tolleranze più strette del controlloro di rinculo. I controllori di rinculo della Serie Elite di Mountain Tactical Company per il Tikka T3 sono della migliore qualità che troverete in qualsiasi luogo.
59.9 EUR 0 59,90 € *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Tikka Modello: T3, T3x

Caratteristiche

Adatto per: Tikka Modello: T3x,T3 Peso della spedizione: 0,025kg Altezza di spedizione: 152mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 152mm

Dettagli dell'elemento

Made in Usa



Mountain Tactical Company is proud to announce our Gen3 Elite Series Stainless Steel Recoil lugs for your Tikka T3 and Tikka T3x rifle. Mountain Tactical’s latest generation of recoil lugs are a significant upgrade from the second generation of lugs.  Previously, we used 316 marine grade stainless steel which had a yield strength of 89,000 psi.  This was a major improvement from the factory aluminum lug which has a yield strength of 21,000 psi or the T3x mild steel lug which has a yield strength of 36,000 psi (significantly less than the standard psi generated by modern rifle cartridges).  Now we have upgraded the stainless steel we use to 17-4PH H900 stainless steel.  The yield strength of this remarkable steel is 200,000 psi. That is 33% stronger than Grade 5 Titanium! Mountain Tactical proudly manufactures their Gen3 Elite Series Stainless Steel Recoil Lugs from 17-4PH H900 Stainless Steel for the ultimate in weather resistance and a lifetime of service. Installation is simple.  Simply remove the two action screws and separate your action from the stock.  Using a pair of pliers, remove the existing metal piece from the stock.  Then push the Elite Series Recoil Lug into the same recess.  Put your action and stock back together and tighten your action screws.  You are done! Note that sometimes it can take a little longer to line up your action and stock because of the tighter tolerances of the recoil lug. The Mountain Tactical Company Elite Series Recoil Lugs for the Tikka T3 are of the finest quality you will find anywhere.
In magazzino
59,90 € * 33,30 € - 64,90 €*
Newsletter