Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia

EGW
SIG SAUER M17 ADAPTER PLATE DELTAPOINT PRO TO VORTEX VENOM

841370111978 296000649
The rear sight plate on your gun needs to be removed to install your red dot on this plate. The plate is mounted to the slide from underneath the slide using the provided 4-40 screws. The red dot is then installed on top of the adapter plate using the provided 6-32 screws. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Dose not work with Sig P320RX, P320 X-Five W/Romeo1 Cut or M17 Military Surplus.
0 0 1 EUR
N. prodotto: 296000649
EGW SIG SAUER M17 ADAPTER PLATE DELTAPOINT PRO TO VENOM
Parti Fabbricante: 49201 841370111978 Per installare il tuo red dot su questa piastra, devi rimuovere la piastra del mirino posteriore dalla tua pistola. La piastra viene montata al carrello dall'interno utilizzando le viti 4-40 fornite. Il red dot viene poi installato sopra la piastra adattatrice utilizzando le viti 6-32 fornite. Istruzioni per l'installazione Rimuovere il mirino posteriore* Installare la EGW Sight Mount nella coda di rondine Posizionare il red dot sight sulla EGW Sight Mount (inserire un piccolo pezzo di carta tra il red dot sight e la sight mount faciliterà la rimozione e impedirà al Loctite di aderire al red dot sight.) Applicare il Loctite blu sulle viti di montaggio fornite Serrare le viti di montaggio a 15in/lbs La modifica della tua arma da fuoco potrebbe annullare la garanzia del produttore. Questo prodotto dovrebbe essere installato e controllato da un armaiolo qualificato. Non si assume alcuna responsabilità per danni o lesioni che possono derivare dall'installazione o dall'uso improprio di questo prodotto. Non è compatibile con Sig P320RX, P320 X-Five W/Romeo1 Cut o M17 Military Surplus.
Avvisa quando diventa disponibile
Non disponibile.
Caratteristiche: Adatto per: Sig Sauer Colore: Nero Materiale: Alluminio Modello: P320 X-Five, M17, M18 Numero di basi: 1 pezzo Tipo: Basi per adattatori

Caratteristiche

Adatto per: Sig Sauer Colore: Nero Materiale: Alluminio Modello: M18,P320 X-Five,M17 Numero di basi: 1 pezzo Tipo: Basi per adattatori Peso della spedizione: 0,045kg Altezza di spedizione: 25mm Larghezza di spedizione: 51mm Lunghezza di spedizione: 140mm

Dettagli dell'elemento

Made in Usa



The rear sight plate on your gun needs to be removed to install your red dot on this plate. The plate is mounted to the slide from underneath the slide using the provided 4-40 screws. The red dot is then installed on top of the adapter plate using the provided 6-32 screws. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Dose not work with Sig P320RX, P320 X-Five W/Romeo1 Cut or M17 Military Surplus.
Newsletter