Il Carrello è vuoto.

Carrello

0364 1955 195

VOLQUARTSEN REMINGTON 870/1100 EXACT EDGE EXTRACTOR

Traduzione automatica (Descrizione originale - Produttore): L'estrattore di bordo esatto è prodotto attraverso un processo EDM per produrre tolleranze impegnative. Il nuovo estrattore non perderà il suo bordo sotto impatto. Altro...

810162010874 930000144

The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under impact. The extractor features a very precise hook point. It is hardened to a RC 58-60 to withstand years of use and still maintain its edge. We are able to hold the tolerances to +/-.0001" by utilizing the EDM manufacturing process. Replaces Remington part #16176 and fits 870, 12, 20 and 1100, 12, 20.

SPECS: For Remington 870 and 1100 models.

Altro...

L'estrattore di bordo esatto è prodotto attraverso un processo EDM per produrre tolleranze impegnative. Il nuovo estrattore non perderà il suo bordo sotto impatto. L'estrattore presenta un punto molto preciso gancio. Si è indurito a una RC 58-60 per resistere ad anni di utilizzo e ancora mantenere il suo bordo. Siamo in grado di tenere le tolleranze di + /-. 0001" utilizzando il processo produttivo di EDM. Sostituisce parte Remington 16176 # e si inserisce 870, 12, 20 e 1100, 12, 20.

Specifiche: per Remington 870 e modelli 1100.

Altro...

Punteggi dei clienti per Remington 870/1100 Exact Edge Extractor

Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4,6

no better then remingtons (20/07/2016)

I bought these under the impression they would fit without any gun smithing wrong! save the money and get the remington extractor

Very nice, precision-made item (29/07/2016)

The Volquartsen Exact-Edge is a super replacement part. The fit is precise enough and the installation went fairly easy outside of the part where the locking pin and spring flew across the room.... despite my efforts to prevent that. Anyway, having recovered my truant parts, it went back together with no fuss. Full disclosure.... I haven't been to the range with it yet, but so far the function has been flawless. Much. much better than the chipped, worn extractor it replaced. In fact, I decided to replace the original, Remington MiM extractor on another 870P I'm customizing, with an Exact-Edge too.

Replaced original (19/01/2017)

I bought this to replace the original extractor on my 870 express made in 1988. The original was rounded off and didn't extract reliably. I replaced spring at same time. Install was easy, no modifications needed. Simple, quick, easy push in replacement.

Better than the original (04/12/2017)

Replaced the old original extractor and spring that was well worn and rounded. Was a fast and simple job. Havenât had a problem with the new one.

Amazing! (19/12/2017)

This product is amazing. it was shocking how poor the quality of the factory extractor was compared to this piece. Very easy to install, i did it without removing the bolt. Works perfectly. For a cheap, quality piece of mind upgrade, this thing is perfect.

<img width="500" src='/userdocs/reviewimages/342d3a8e-9498-48f6-99e4-6248b13ab531.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/a1989df3-cc22-4e3a-a807-e2ebab7e42ab.jpg' alt=''>

For More Positive Extractions (25/12/2017)

I used this product to replace my factory MIM extractor that came from the factory on my Express model. I had noticed that on certain brands of cheap ammo, the extractor once and a rare while missed the edge of the shell and continue rearward, leaving the shell partially extracted. Unloading a gun and taking the barrel off on the range to fix a jam is a headache, and embarrassing, to say the least.

I decided to go with this product instead of the Remington because of the stellar reviews. For a few buck more, why not?

Install is ridiculously simple, especially if you have a smaller flat head screwdriver. By depressing the plunger, you can swap out extractors in seconds. The replacement seems longer to me than the MIM part, and the hook is definitely sharper and more pronounced. Plus, it fit the gun seamlessly, so no polishing was necessary.

After installing this and polishing the chamber, extraction is much more positive. The new extractor seems to latch onto the shell more firmly, even with the cheapest birdshot ammunition. About 200 rounds later, the problem seems permanently fixed.

Quality Product; Fixes Common Issues (07/01/2018)

I bought an 18.5" Remington 870 Tactical a week ago and I started dry cycling it and noticed that the factory extractor's blunt nose started hitting the bottom of the ramp it's meant to slide up into in the barrel's perimeter. The issue was that the extractor was meeting the ramp at too low a position. It started making a notch at the base of the ramp. Not too happy about that. It's a brand new shotgun which I have yet to fire. I'm under the impression that any gun should be able to dry cycle many times without killing itself.

I was very happy to see that there was a quality alternative extractor, and the "exact edge" design is just what I needed, as it eliminates the dull face that the other one had and so it just slides right up the ramp when the bolt meets the barrel.

It's possible that the factory extractor would have done the job if I had rounds to cycle, as it may have pushed the extractor up a tad so it hit the ramp at the right spot, but I didn't like that the gun had a weakness even when dry cycling. I've also heard of the issue of rounds not being extracted properly, and that this does the job for that as well, so win-win. Sucks I had to fix a brand new gun, but I guess it's a lot like when software is released and they have day 1 patches.

This is a must-have for reliability-sake.

Great upgrade (17/05/2018)

Super easy to replace the original extractor with this upgrade. Made much better than the factory 870 extractor and reliable. I have had several thousand rounds through my 870 express supermag with this new extractor and it has preformed flawlessly.

Leggi più recensioni su brownells.com

35.3 35.3 1 EUR

930000144
Remington 870/1100 Exact Edge Extractor
Parti Fabbricante: VCREM 810162010874 L'estrattore di bordo esatto è prodotto attraverso un processo EDM per produrre tolleranze impegnative. Il nuovo estrattore non perderà il suo bordo sotto impatto. L'estrattore presenta un punto molto preciso gancio. Si è indurito a una RC 58-60 per resistere ad anni di utilizzo e ancora mantenere il suo bordo. Siamo in grado di tenere le tolleranze di + /-. 0001" utilizzando il processo produttivo di EDM. Sostituisce parte Remington 16176 # e si inserisce 870, 12, 20 e 1100, 12, 20.

35.3 EUR 97 35,30 € *

+10 disponibili presso il magazzino Brownells USA

Caratteristiche: Adatto per: Remington Modello: 1100, 870

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: Remington Modello: 1100,870

Dettagli dell'elemento

Made in Usa

SPECS: For Remington 870 and 1100 models.

Altro...

Specifiche: per Remington 870 e modelli 1100.

Altro...

Punteggi dei clienti per Remington 870/1100 Exact Edge Extractor

Numero di punteggi: 8
Da brownells.com: 8
Punteggio medio: 4,6

no better then remingtons (20/07/2016)

I bought these under the impression they would fit without any gun smithing wrong! save the money and get the remington extractor

Very nice, precision-made item (29/07/2016)

Replaced original (19/01/2017)

Better than the original (04/12/2017)

Replaced the old original extractor and spring that was well worn and rounded. Was a fast and simple job. Havenât had a problem with the new one.

Amazing! (19/12/2017)

For More Positive Extractions (25/12/2017)

Quality Product; Fixes Common Issues (07/01/2018)

Great upgrade (17/05/2018)

Leggi più recensioni su brownells.com

Scelti da altri clientie

Extractor Spring

REMINGTON

+10 disponibili presso il magazzino Brownells USA +10 disponibili presso il magazzino Brownells USA

7,40 € *

Molle per estrattore

5 (3)

Sear Spring, Light Pull

REMINGTON

+10 disponibili presso il magazzino Brownells USA +10 disponibili presso il magazzino Brownells USA

8,80 € *

Molle sear

0 (0)

Firing Pin

REMINGTON

+10 disponibili presso il magazzino Brownells USA +10 disponibili presso il magazzino Brownells USA

15,50 € *

Percussore

0 (0)

Firing Pin Retractor Spring

REMINGTON

+10 disponibili presso il magazzino Brownells USA +10 disponibili presso il magazzino Brownells USA

7,70 € *

Molle percussore

0 (0)

Jumbo Head Safety
TACTICAL RESPONSE® JUMBO HEAD SAFETY

SCATTERGUN TECHNOLOGY

+10 disponibili presso il magazzino Brownells USA +10 disponibili presso il magazzino Brownells USA

26,40 € *

Sicura

4,1 (16)

Accesso

Hai dimenticato la password?
Registrati

Social Media

Brownells.it

Catalogo prodotti

Ordinare

Customer Service

Benvenuti!

Benvenuti su Brownells.it, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Italia!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te!

Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.it per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.

Nel nostro negozio online potrai trovare oltre 60.000 prodotti, tra cui parti d'arma, accessori, utensili per armieri, materiale per ricarica e componenti di munizioni, e altri prodotti per mantenere, riparare e aggiornare le tue armi.

Tutti i prezzi sono comprensivi di Iva ma sono esclusi i costi di spedizione. P.IVA C.F. IT02801420981

Visualizzazione classica

Visualizzazione mobile