OPF-M17, ACRO, RSD is precision machined from 4140 steel, and QPQ coated. Aimpoint ACRO P1/P2 requires the plates to adhere to Aimpoint ACRO TDP with tight tolerances, OPF-M17, ACRO, RSD has proven to be the best choice among professional users. OPF-M17, ACRO, RSD is compatible with MIL issued M17/M18. It is a drop in adapter for superb Aimpoint ACRO sights. It is identical to the Tangodown SSM-03. OPF-M17, ACRO, RSD is compatible with P320 X-Five Legion, Legion Carry, and DP Cut. It is not compatible with P320 Pro Cut, P320 sub compact, AXG, and RX. OPF-M17-ACRO, RSD is shipped with two M4 0.7mm x 6mm (torque value: 20 to 25 in·lb), a T20 key, and a packet of VC-3. Proudly designed and made in the USA. ATTENTION: Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO. Should this be the case, firmly push the MPS on the plate, or gently tap on the sight until the MPS fully seats. For the new M17/M18 and SIG P320 with the Delta Point Pro cut, Forward Controls Design is proud to offer OPF-M17, ACRO, RSD (rear sight dovetail).
Mounting Plate di alta precisione per ottiche M17/M18
Il M17/M18 OPTIC MOUNTING PLATE WITH RSD, prodotto da FORWARD CONTROLS DESIGN, è stato progettato per offrire prestazioni superiori e compatibilità con ottiche Aimpoint ACRO.
Descrizione del Prodotto
Il OPF-M17, ACRO, RSD è realizzato con precisione in acciaio 4140 e rivestito con QPQ. Questo montaggio è conforme alle tolleranze rigide del TDP di Aimpoint ACRO P1/P2, rendendolo la scelta migliore per gli utenti professionisti.
Compatibile con le versioni militari M17/M18, il OPF-M17, ACRO, RSD è un adattatore plug-and-play per ottiche Aimpoint ACRO di alta qualità. È identico al modello Tangodown SSM-03.
Compatibilità
- P320 X-Five Legion
- Legion Carry
- DP Cut
Nota: Non è compatibile con P320 Pro Cut, P320 sub compact, AXG e RX.
Contenuto della Confezione
Il OPF-M17-ACRO, RSD viene fornito con:
- Due viti M4 0.7mm x 6mm (valore di coppia: 20 a 25 in·lb)
- Una chiave T20
- Un pacchetto di VC-3
Progettato e realizzato con orgoglio negli USA.
Attenzione per gli utenti Steiner MPS
Il perno di rinculo dell'MPS sotto l'ottica può variare in larghezza e risultare leggermente più largo rispetto a quello dell'ACRO. In tal caso, spingere saldamente l'MPS sulla piastra o battere delicatamente sull'ottica fino a quando l'MPS non si posiziona completamente.
Per il nuovo M17/M18 e SIG P320 con il taglio Delta Point Pro, Forward Controls Design è orgogliosa di offrire il OPF-M17, ACRO, RSD (dovetail per la mira posteriore).