One piece, steel mount provides a secure, stable scope base that won’t shift between shots. Rock-solid, three-point mounting system attaches to the factory scope mount screw hole in the receiver and the charger guide dovetail, while the setscrew at the front uses the receiver ring as a stop to prevent forward movement. No drilling or tapping required; mounting hardware included. Machined from the same type of steel as the M14 receiver, so mount and receiver expand at the same rate as the gun heats up to help keep your optic zeroed during prolonged fire. Thirteen MIL-STD 1913 Picatinny cross-slots offer plenty of versatility in setting eye relief. Sight channel allows use of iron sights without removing the scope. Cutout above ejection port helps prevent case hangups.
SPECS: 8620 steel, Parkerized, matte black finish. 5½” (14cm) long, 1½” (3.8cm) wide, 2” (5.1cm) tall. 11.6 oz. (329g) weight. All mounting hardware included. Minor fitting required.
Altro...
Attacco per Mirino Stabile e Sicuro Senza Bisogno di Armaiolo
Un supporto in acciaio monopezzo che fornisce una base solida e stabile per il mirino, che non si sposta tra un colpo e l'altro. Sistema di montaggio a tre punti solidissimo, si attacca al foro della vite della base di montaggio dello scopo originale sul ricevitore e alla coda di rondine della guida del caricatore, mentre la vite di fissaggio anteriore utilizza l'anello del ricevitore come arresto per impedire movimenti in avanti. Non è necessario praticare fori o filettature; ferramenta di montaggio inclusa. Lavorato dallo stesso tipo di acciaio del ricevitore M14, così il supporto e il ricevitore si espandono allo stesso ritmo quando l'arma si scalda, aiutando a mantenere il mirino zeroato durante il fuoco prolungato. Tredici slot trasversali MIL-STD 1913 Picatinny offrono molta versatilità nel posizionare il rilievo oculare. Il canale di mira permette l'uso dei mirini in ferro senza rimuovere lo scopo. Il taglio sopra il porto di espulsione aiuta a prevenire inceppamenti dei bossoli.
SPECIFICHE: Acciaio 8620, Parkerizzato, finitura nera opaca. Lunghezza 5½” (14cm), larghezza 1½” (3.8cm), altezza 2” (5.1cm). Peso 11.6 oz. (329g). Tutte le ferramenta di montaggio incluse. Richiede un leggero adattamento.
Altro...
Punteggi dei clienti per FULTON ARMORY M14/M1A SCOPE MOUNT
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
Impresed so far(14/06/2012)
Fit like a glove. The descreption said there may be some minor gunsmithing. None was needed, other than removel of the stripper guide.I also used a small pice of lead between the forward set screw and the screw that rests on the chamber ring. The only gripe I have is the lack of any instructions, not so much for assembly but for adjustment. Finnsh is good there are some tool marks in the hallow around the main bolt hole other than that finnsh is exellent. I have not been to the range yet, but there is nothing about this mount that would make me think it wouldn't do very well.
N. prodotto: 100005275 FULTON ARMORY M14/M1A SCOPE MOUNT Parti Fabbricante: A315M Un supporto in acciaio monopezzo che fornisce una base solida e stabile per il mirino, che non si sposta tra un colpo e l'altro. Sistema di montaggio a tre punti solidissimo, si attacca al foro della vite della base di montaggio dello scopo originale sul ricevitore e alla coda di rondine della guida del caricatore, mentre la vite di fissaggio anteriore utilizza l'anello del ricevitore come arresto per impedire movimenti in avanti. Non è necessario praticare fori o filettature; ferramenta di montaggio inclusa. Lavorato dallo stesso tipo di acciaio del ricevitore M14, così il supporto e il ricevitore si espandono allo stesso ritmo quando l'arma si scalda, aiutando a mantenere il mirino zeroato durante il fuoco prolungato. Tredici slot trasversali MIL-STD 1913 Picatinny offrono molta versatilità nel posizionare il rilievo oculare. Il canale di mira permette l'uso dei mirini in ferro senza rimuovere lo scopo. Il taglio sopra il porto di espulsione aiuta a prevenire inceppamenti dei bossoli.
Adatto per:
Springfield
Colore:
Nero Opaco
Materiale:
Acciaio
Modello:
M14,M1A
Numero di basi:
1 pezzo
Tipo:
Basi tattiche
Peso della spedizione: 0,34kgAltezza di spedizione: 38mmLarghezza di spedizione: 79mmLunghezza di spedizione: 165mm
One piece, steel mount provides a secure, stable scope base that won’t shift between shots. Rock-solid, three-point mounting system attaches to the factory scope mount screw hole in the receiver and the charger guide dovetail, while the setscrew at the front uses the receiver ring as a stop to prevent forward movement. No drilling or tapping required; mounting hardware included. Machined from the same type of steel as the M14 receiver, so mount and receiver expand at the same rate as the gun heats up to help keep your optic zeroed during prolonged fire. Thirteen MIL-STD 1913 Picatinny cross-slots offer plenty of versatility in setting eye relief. Sight channel allows use of iron sights without removing the scope. Cutout above ejection port helps prevent case hangups.
SPECS: 8620 steel, Parkerized, matte black finish. 5½” (14cm) long, 1½” (3.8cm) wide, 2” (5.1cm) tall. 11.6 oz. (329g) weight. All mounting hardware included. Minor fitting required.
Altro...
Attacco per Mirino Stabile e Sicuro Senza Bisogno di Armaiolo
Un supporto in acciaio monopezzo che fornisce una base solida e stabile per il mirino, che non si sposta tra un colpo e l'altro. Sistema di montaggio a tre punti solidissimo, si attacca al foro della vite della base di montaggio dello scopo originale sul ricevitore e alla coda di rondine della guida del caricatore, mentre la vite di fissaggio anteriore utilizza l'anello del ricevitore come arresto per impedire movimenti in avanti. Non è necessario praticare fori o filettature; ferramenta di montaggio inclusa. Lavorato dallo stesso tipo di acciaio del ricevitore M14, così il supporto e il ricevitore si espandono allo stesso ritmo quando l'arma si scalda, aiutando a mantenere il mirino zeroato durante il fuoco prolungato. Tredici slot trasversali MIL-STD 1913 Picatinny offrono molta versatilità nel posizionare il rilievo oculare. Il canale di mira permette l'uso dei mirini in ferro senza rimuovere lo scopo. Il taglio sopra il porto di espulsione aiuta a prevenire inceppamenti dei bossoli.
SPECIFICHE: Acciaio 8620, Parkerizzato, finitura nera opaca. Lunghezza 5½” (14cm), larghezza 1½” (3.8cm), altezza 2” (5.1cm). Peso 11.6 oz. (329g). Tutte le ferramenta di montaggio incluse. Richiede un leggero adattamento.
Altro...
Punteggi dei clienti per FULTON ARMORY M14/M1A SCOPE MOUNT
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
Impresed so far(14/06/2012)
Fit like a glove. The descreption said there may be some minor gunsmithing. None was needed, other than removel of the stripper guide.I also used a small pice of lead between the forward set screw and the screw that rests on the chamber ring. The only gripe I have is the lack of any instructions, not so much for assembly but for adjustment. Finnsh is good there are some tool marks in the hallow around the main bolt hole other than that finnsh is exellent. I have not been to the range yet, but there is nothing about this mount that would make me think it wouldn't do very well.