Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia

EGW
LPA-LOW LEUPOLD DELTAPONT PRO SIGHT MOUNT

841370115662 296000678
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: Rock Island 1911s EAA / Tanfoglio Witness' with LPA/Bomar style rear sights (EAA Super Sight)
0 0 1 EUR
N. prodotto: 296000678
EGW LPA-LOW LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Parti Fabbricante: 49403 841370115662 I mirini red dot di EGW sono progettati per essere installati da sinistra a destra (con la volata rivolta in avanti). La coda di rondine ha una conicità progressiva per permettere un'installazione più semplice. Semplicemente rimuovi il mirino posteriore dalla tua arma e sostituiscilo con il supporto EGW per montare il tuo Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, o mirino red-dot Optima. Puoi rimuovere il supporto e rimettere il tuo mirino posteriore in qualsiasi momento. Hardware di montaggio incluso. Istruzioni di installazione Rimuovi il mirino posteriore* Installa il Supporto Mirino EGW nella coda di rondine Serra la vite di fissaggio (se applicabile) Posiziona il mirino red dot sul Supporto Mirino EGW (posizionando un piccolo pezzo di carta tra il mirino red dot e il supporto mirino renderà la rimozione più facile e terrà il Loctite lontano dal mirino red dot.) Applica Loctite blu alle viti di montaggio fornite Serra le viti di montaggio a 15in/lbs La modifica della tua arma da fuoco può invalidare la garanzia del produttore. Questo prodotto dovrebbe essere installato e controllato da un armaiolo qualificato. Non si assume alcuna responsabilità per danni o lesioni che possono derivare dall'installazione o dall'uso improprio di questo prodotto. Questo supporto non è compatibile con: Rock Island 1911s EAA / Tanfoglio Witness con mirini posteriori stile LPA/Bomar (EAA Super Sight)
Avvisa quando diventa disponibile
Non disponibile.
Caratteristiche: Adatto per: Magnum Research, IWI, EAA Colore: Nero Materiale: Alluminio Modello: SAR K2P, Baby Desert Eagle, Witness Elite Match, Jericho 941 Numero di basi: 1 pezzo Tipo: Tattico

Caratteristiche

Adatto per: EAA,IWI,Magnum Research Colore: Nero Materiale: Alluminio Modello: Witness Elite Match,Baby Desert Eagle,SAR K2P,Jericho 941 Numero di basi: 1 pezzo Tipo: Tattico Peso della spedizione: 0,045kg Altezza di spedizione: 25mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 140mm

Dettagli dell'elemento

Made in Usa



EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: Rock Island 1911s EAA / Tanfoglio Witness' with LPA/Bomar style rear sights (EAA Super Sight)
Newsletter