Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia

EGW
CZ 75, 85, P-01, PCR LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370115914 296000677
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (may require fitting due to a variance in dovetail dimensions) CZ P-09 (may require fitting due to a variance in dovetail dimensions) CZ PCR (there will be a gap under the front of the adapter plate) Tristar P120
0 0 1 EUR
N. prodotto: 296000677
EGW CZ75, 85, P-01, PCR LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Parti Fabbricante: 49402 841370115914 Per montare il tuo mirino Leupold DeltaPoint Pro, JPoint, Redfield Accelerator o Optima red-dot, rimuovi semplicemente il mirino posteriore dalla tua arma e sostituiscilo con il supporto EGW. Puoi rimuovere il supporto e ripristinare il mirino posteriore in qualsiasi momento. Viti per il montaggio incluse. Istruzioni per l'installazione Rimuovi il mirino posteriore* Installa il supporto EGW nella coda di rondine Stringi la vite di fissaggio (se applicabile) Posiziona il mirino red dot sul supporto EGW (mettendo un piccolo pezzo di carta tra il mirino red dot e il supporto facilita la rimozione e protegge dai residui di Loctite.) Applica Loctite blu alle viti di montaggio fornite Serra le viti di montaggio a 15in/lbs La modifica della tua arma da fuoco può annullare la garanzia del produttore. Questo prodotto dovrebbe essere installato e controllato da un armaiolo qualificato. Non si assume alcuna responsabilità per danni o lesioni che possono derivare dall'installazione o dall'uso improprio di questo prodotto. Questo supporto è compatibile con: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (potrebbe richiedere adattamenti a causa di variazioni nelle dimensioni della coda di rondine) CZ P-09 (potrebbe richiedere adattamenti a causa di variazioni nelle dimensioni della coda di rondine) CZ PCR (ci sarà uno spazio sotto la parte anteriore della piastra di adattamento) Tristar P120
Avvisa quando diventa disponibile
Non disponibile.
Caratteristiche: Adatto per: CZ Colore: Nero Materiale: Alluminio Modello: 75, 85, P-07, P-09, 97B, P-01, SP-01 Shadow, PCR, SP-01, SP-01 Phantom, 97D Numero di basi: 1 pezzo Tipo: Tattico

Caratteristiche

Adatto per: CZ Colore: Nero Materiale: Alluminio Modello: P-09,P-07,SP-01 Phantom,SP-01 Shadow,97D,P-01,85,PCR,SP-01,75,97B Numero di basi: 1 pezzo Tipo: Tattico Peso della spedizione: 0,045kg Altezza di spedizione: 25mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 140mm

Dettagli dell'elemento

Made in Usa



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (may require fitting due to a variance in dovetail dimensions) CZ P-09 (may require fitting due to a variance in dovetail dimensions) CZ PCR (there will be a gap under the front of the adapter plate) Tristar P120
Newsletter