Oltre 300.000 clienti - vi ringraziamo!

Oltre 40.000 prodotti per caccia e sport di tiro

Il Gas Key Regolabile Rubber City Armory migliora le prestazioni dei sistemi GI a massa ridotta e standard, con regolazione gas facile e senza smontaggio.
-10 %

RUBBER CITY ARMORY ADJUSTABLE GAS KEY

100015575

Caratteristiche

  • Tipo di arma:
    AR-15
  • Peso della spedizione: 0,009kg
  • Altezza di spedizione: 16mm
  • Larghezza di spedizione: 57mm
  • Lunghezza di spedizione: 102mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x
  • Specifiche:
  • Adatto per: AR-15
0 0 1 EUR
Solo fino a domenica, ore 23.59
-10 %
74,90 €
0 0 1 EUR
Descrizione Specification Recensioni dei clienti Accessories

RUBBER CITY ARMORY ADJUSTABLE GAS KEY

Solo fino a domenica, ore 23.59
-10 %
74,90 €
Avvisa quando diventa disponibile

Descrizione:

Mostra originale (inglese)

Potenzia le tue prestazioni con il Gas Key Regolabile di Rubber City Armory!

Il Gas Key Regolabile di Rubber City Armory migliora le prestazioni dei sistemi GI a massa ridotta e standard senza la necessità di smontaggi complicati. Grazie a questo prodotto innovativo, il flusso di gas può essere regolato e mantenuto direttamente sul carrier utilizzando 2 viti di regolazione: una per regolare il flusso di gas e l'altra per fissarlo in posizione.

Realizzato in 4140 pre-indurito con una durezza di 28-32RC, presenta angoli smussati per ridurre gli spigoli vivi, garantendo così una maggiore sicurezza e facilità d'uso.

Specifiche:

  • Materiale: 4140 pre-indurito
  • Durezza: 28-32RC
  • Viti di montaggio incluse: 2

Rendi la tua esperienza di tiro ancora più efficace con il Gas Key Regolabile di Rubber City Armory!



Caratteristiche

  • Tipo di arma:
    AR-15
  • Peso della spedizione: 0,009kg
  • Altezza di spedizione: 16mm
  • Larghezza di spedizione: 57mm
  • Lunghezza di spedizione: 102mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

Recensioni dei clienti

Valutazioni dei clienti (3)

4,3 / 5
Assolutamente raccomandato

Brownells USA Excellent Product 31/07/2015

I ordered this product for my suppressed 16" 300blk. The first time I ordered the product, it arrived with the bag cut (where the parts are) and a small piece of tape to cover it. I was missing one mounting bolt and all of the set screws. I returned it (Brownells made it right in a hurry) and received the replacement. This one had all of the pieces. The finish of the part is done well and is smooth to the touch. There aren't any instructions on how to install it but it is pretty straightforward. I thoroughly degreased the parts and placed a thin layer of red Loctite around the gas port and set the key in place. I also used a small amount of red Loctite on the mounting screws and torqued them to 58 in/lbs. I then put a quick shot of air through the key to make sure the hole was clear and let it set up for 24 hours. I did not stake it, as I was not sure if I was going to like it.



After the Loctite was good and set up, I took the gun out to the range to see how it worked. I am shooting 110gr Varmageddons with 19.5gr of W296, at about 2400 ft/s (Carbine gas) and an AAC Cyclone suppressor. I started with the set screw all the way in the closed position and placed one round in the magazine and fired. To my surprise the case was ejected at about 3-4 o'clock and about 5 feet away. The bolt did not lock back. I tried this several more times with the same result so it doesn't appear that one would be able to shut the gas all the way with a supersonic load. Recoil was drastically reduced from how the gun ran previous, which would slam the bolt back hard and throw brass directly behind me and over 20 feet away.



I backed out the adjustment screw 1/2 a turn and repeated. Same ejection and recoil, no bolt lock back. Another 1/2 turn, and the bolt locked back. I backed the screw out another 1/4 turn and put the locking screw in on top of it (no Loctite). I then fired the weapon approximately 30 times and checked the set screws. There was 0 movement but time will tell whether I will need to put some blue Loctite on or not.



Overall this is a good product. It is easy to adjust and comes with one extra set screw and one adjustment wrench. It does come with a little Rubber City Armory logo decal. It is very cheap looking but that is not really a big deal.



Now some may be concerned with where the gas goes. It goes in the receiver as my gun was a little dirtier than normal after the small amount of firing that I did. This did not affect how the rifle ran, as I had no malfunctions. Now I will go ahead and get those screws staked in.

Raccomandato con riserve

Brownells USA Great Idea. 09/04/2015

Gas control screws had to be reset repeatedly.



Even with the set screw there were problems keeping it where I wanted it. Once it was adjusted the adjustment changed when you tightened the locking screw.

  • Specifiche:
  • Adatto per: AR-15

Lo sapevi?

Informazioni sul produttore

Operatore economico responsabile secondo il regolamento UE

Brownells
Via Mezzavilla 4
25043 Breno
Italia
service@brownells.it

Ops! Qualcosa è andato storto.

Si è verificato un errore durante il caricamento di questo contenuto. Aggiorna la pagina per continuare. Se il problema persiste, contatta il nostro servizio clienti.

Torna all'inizio