Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia
100004369
For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.

109.9 109.9 1 EUR
N. prodotto: 100004369
10-8 PERFORMANCE ARMORER'S BLOCK
Parti Fabbricante: BLOCK Pratico blocco da banco lavorato in nylon super-resistente rinforzato con vetro, sostiene i componenti della pistola 1911 in modo da poter eseguire una varietà di lavori di riparazione, assemblaggio/smontaggio e accurizzazione in modo rapido e semplice. Mantiene in modo sicuro il telaio su un lato, consentendoti di lavorarci sopra senza rischiare di danneggiare la finitura. Utile per controllare l'ingaggio di martello e grilletto, rimuovere il perno della molla del martello, rimuovere il carter della molla principale e tenere il blocco di sicurezza per facilitare la limatura della superficie di ingaggio del perno di arresto. Utilizzabile per tendere l'estrattore fuori dalla slitta, in modo da non rischiare di graffiarla, e per mantenere l'estrattore in posizione mentre si lima e si rifinisce l'artiglio. Sostiene la canna durante la rimozione del perno di collegamento, con fori ciechi per catturare i perni in modo che non si perdano. È possibile anche posizionare il telaio tra due blocchi e serrare il tutto in una morsa da banco per adattare la slitta.
109.9 EUR 0 109,90 € *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: 1911 Modello: Government, Commander, Officers

Caratteristiche

Adatto per: 1911 Modello: Commander,Government,Officers Peso della spedizione: 0,363kg Altezza di spedizione: 38mm Larghezza di spedizione: 122mm Lunghezza di spedizione: 107mm

Dettagli dell'elemento

Made in Usa



For Fast, Easy Maintenance, While Protecting Pistol & Hands From Damage
Handy bench block machined from super-tough, glass-reinforced nylon supports 1911 pistol components so you can perform a variety of repair, assembly/disassembly, and accurizing tasks quickly and easily. Securely holds the frame on its side, so you can work on it without risk of damaging the finish. Helps you check hammer/sear engagement, remove hammer strut pin, remove mainspring housing, and holds thumb safety for easy filing of sear stop stud engagement surface. Use to tension the extractor off the slide, so you don’t risk scratching the slide, and retain the extractor while filing and honing the claw. Holds the barrel during link pin removal, with blind holes to catch the pins so they don’t get lost. You can even place the frame between two blocks and clamp it in a bench vise for slide fitting.

SPECS: Glass-reinforced nylon, black. 4” long (10.2cm) x 4” wide x 1¼” (3.2cm) high.

Newsletter