Mainstay Of Any Polishing Room For Most Polishing Jobs
Spiral Stitched - used primarily for first cleaning operation on the gun with No. 140 Polish-O-Ray"! to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of Soft Felt wheels - being of a more flexible nature, great care must be exercised to not round edges, or funnel and elongate screw and pin holes.Loose Muslin - used following each change of grit to smooth out grit marks and prepare the surface for the next finer grit. Also used to finish off the gun just prior to bluing.Note: - Use enough sections to make each wheel as wide as your polishing motor will handle - a minimum of three sections to each wheel. Never try to use the same wheel for different grit numbers. After a wheel is broken-in and in use, mark it with the grit number to be used on it and direction of rotation to be turned. Will increase wheel life, give better finishes and save hours of work.
Pilastro di tutta la stanza per i lavori più lucidatura lucidatura
Spirale cucita - utilizzato principalmente per la prima operazione di pulizia sulla pistola con n. 140 polacco-O-Ray"! per staccare la ruggine, sporco e vecchio blu e portare il metallo a una finitura brillante. Utilizzato anche da alcuni operatori invece ruote feltro morbido - essendo di natura più flessibile, grande cura deve essere esercitato per non arrotondare i bordi, o imbuto e allungare i fori vite e pin.Sciolto mussola - usato dopo ogni cambio di graniglia per appianare i segni di grinta e preparare la superficie per il prossimo grinta più fine. Utilizzato anche per finire la pistola prima della brunitura.Nota: - utilizzare abbastanza sezioni per rendere ogni ruota così ampia come gestirà la lucidatura motore - un minimo di tre sezioni per ogni ruota. Mai cercare di utilizzare la stessa ruota per i numeri di grana diversa. Dopo una ruota si è rotto-in e in uso, contrassegnarlo con il numero di grinta per essere utilizzato su di esso e il senso di rotazione per essere trasformato. Aumentare la vita ruota, darà migliori finiture e risparmiare ore di lavoro.
Specifiche: ruote cucite hanno faccia 3/8"(0,5 mm). Ruote allentati sono 20 strati. Arbor: 1/2"(12.7 mm), 5/8" (15,9 mm), 3/4" mm 919), 7/8" (22,2 mm), 1"(22,5 cm). Ruota diametro: 6 cm (15.2), 8 (20,3 cm) ", 10" (25,4 mm).
Altro...
Punteggi dei clienti per BROWNELLS 10" LOOSE MUSLIN WHEEL 1" ARBOR
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4,7
The best buffs(27/10/2011)
I have tried cheaper buffs and that is what I got. These last extremely well and are the best I have found.
GOOD FOR TIGHT SPACES(16/02/2012)
good for when you need to polish/clean tiny/tight spaces as they are about a 1/4"thick.
Doesn't come in pairs(27/04/2012)
The wheels do not come in pairs (stitched and loose) even though IMHO the description makes it sound that way. Had to pay shipping twice for the loose wheels.
Mainstay Of Any Polishing Room For Most Polishing Jobs
Spiral Stitched - used primarily for first cleaning operation on the gun with No. 140 Polish-O-Ray"! to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of Soft Felt wheels - being of a more flexible nature, great care must be exercised to not round edges, or funnel and elongate screw and pin holes.Loose Muslin - used following each change of grit to smooth out grit marks and prepare the surface for the next finer grit. Also used to finish off the gun just prior to bluing.Note: - Use enough sections to make each wheel as wide as your polishing motor will handle - a minimum of three sections to each wheel. Never try to use the same wheel for different grit numbers. After a wheel is broken-in and in use, mark it with the grit number to be used on it and direction of rotation to be turned. Will increase wheel life, give better finishes and save hours of work.
Pilastro di tutta la stanza per i lavori più lucidatura lucidatura
Spirale cucita - utilizzato principalmente per la prima operazione di pulizia sulla pistola con n. 140 polacco-O-Ray"! per staccare la ruggine, sporco e vecchio blu e portare il metallo a una finitura brillante. Utilizzato anche da alcuni operatori invece ruote feltro morbido - essendo di natura più flessibile, grande cura deve essere esercitato per non arrotondare i bordi, o imbuto e allungare i fori vite e pin.Sciolto mussola - usato dopo ogni cambio di graniglia per appianare i segni di grinta e preparare la superficie per il prossimo grinta più fine. Utilizzato anche per finire la pistola prima della brunitura.Nota: - utilizzare abbastanza sezioni per rendere ogni ruota così ampia come gestirà la lucidatura motore - un minimo di tre sezioni per ogni ruota. Mai cercare di utilizzare la stessa ruota per i numeri di grana diversa. Dopo una ruota si è rotto-in e in uso, contrassegnarlo con il numero di grinta per essere utilizzato su di esso e il senso di rotazione per essere trasformato. Aumentare la vita ruota, darà migliori finiture e risparmiare ore di lavoro.
Specifiche: ruote cucite hanno faccia 3/8"(0,5 mm). Ruote allentati sono 20 strati. Arbor: 1/2"(12.7 mm), 5/8" (15,9 mm), 3/4" mm 919), 7/8" (22,2 mm), 1"(22,5 cm). Ruota diametro: 6 cm (15.2), 8 (20,3 cm) ", 10" (25,4 mm).
Altro...
Punteggi dei clienti per BROWNELLS 10" LOOSE MUSLIN WHEEL 1" ARBOR
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4,7
The best buffs(27/10/2011)
I have tried cheaper buffs and that is what I got. These last extremely well and are the best I have found.
GOOD FOR TIGHT SPACES(16/02/2012)
good for when you need to polish/clean tiny/tight spaces as they are about a 1/4"thick.
Doesn't come in pairs(27/04/2012)
The wheels do not come in pairs (stitched and loose) even though IMHO the description makes it sound that way. Had to pay shipping twice for the loose wheels.