Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia
592046792358 100015709
The lugs are designed to fit snuggly, with minimum movement, to keep the nut from getting damaged. The inside of the wrench will fit over most standard A1 and A2 flash hiders, as well as Yankee Hill and others. The outside of the wrench fits nicely inside the stock handguard. There are two wrench flats for a 15/16 open end wrench or crows foot wrench, if you want to use a torque wrench. This is the Professional/Gunsmith version of the barrel nut wrench for the Smith & Wesson M&P 15-22. You will get many years of trouble free use from this barrel nut wrench. This wrench will fit over most standard diameter muzzle devices, such as the A2 birdcage, but the barrel nut and handguard end cap will not. Therefore, you have to remove the muzzle device to remove the barrel nut and barrel. Simple, step-by-step instructions are included. Machined from the highest quality U.S. aluminum stock available. Designed, developed, and manufactured in the USA.  
49.9 49.9 1 EUR
N. prodotto: 100015709
TACTICOOL22 M&P 15-22 BARREL NUT WRENCH
Parti Fabbricante: BNW1PRO 592046792358 Le alette sono progettate per adattarsi perfettamente, con il minimo movimento, per evitare danni al dado. L'interno della chiave si adatta alla maggior parte dei freni di bocca standard A1 e A2, oltre che a quelli di Yankee Hill e altri. L'esterno della chiave si adatta bene all'interno dell'astina standard. Ci sono due piatti per chiave fissa da 15/16 o per chiave a corona, nel caso in cui si voglia utilizzare una chiave dinamometrica. Questa è la versione Professionale/Armeria della chiave per dadi canna per il Smith & Wesson M&P 15-22. Questa chiave per dadi canna vi garantirà molti anni di utilizzo senza problemi. La chiave si adatterà alla maggior parte dei dispositivi di riduzione del rinculo di diametro standard, come il birdcage A2, ma il dado della canna e il cappuccio finale dell'astina no. Pertanto, è necessario rimuovere il dispositivo di riduzione del rinculo per rimuovere il dado della canna e la canna. Istruzioni semplici e passo dopo passo sono incluse. Prodotto lavorando il miglior alluminio disponibile negli Stati Uniti. Progettato, sviluppato e fabbricato negli USA.
49.9 EUR 5 49,90 € *
Tempi di consegna circa 12-16 giorni.
5 pz. nel magazzino USA

Caratteristiche

Peso della spedizione: 0,068kg Altezza di spedizione: 32mm Larghezza di spedizione: 32mm Lunghezza di spedizione: 254mm

Dettagli dell'elemento

Made in Usa




The lugs are designed to fit snuggly, with minimum movement, to keep the nut from getting damaged. The inside of the wrench will fit over most standard A1 and A2 flash hiders, as well as Yankee Hill and others. The outside of the wrench fits nicely inside the stock handguard. There are two wrench flats for a 15/16 open end wrench or crows foot wrench, if you want to use a torque wrench. This is the Professional/Gunsmith version of the barrel nut wrench for the Smith & Wesson M&P 15-22. You will get many years of trouble free use from this barrel nut wrench. This wrench will fit over most standard diameter muzzle devices, such as the A2 birdcage, but the barrel nut and handguard end cap will not. Therefore, you have to remove the muzzle device to remove the barrel nut and barrel. Simple, step-by-step instructions are included. Machined from the highest quality U.S. aluminum stock available. Designed, developed, and manufactured in the USA.  
Newsletter