Unlike all other hammers out there, the PSDB is all-steel precision CNC machined hammer. No cheap wood handles or over-molded screws for tips. This is a serious hammer for serious gunsmithing - hitting pins, punches, whatever. The PSDB can have 3 different hammer tip materials “on-board” - one can be screwed into each side of the hammer head, and the third screws into the bottom of the handle. So no matter what type of pin, or against what finish you might have to hit you can pick a hard or soft non-marring hammer tip for the job. The tips are held tight with large o-rings, so they’ll never back-off and come loose. The PSDB is a whole new type of dead-blow hammer, with the PSDB Hammer from Magna-Matic Defense your not just pounding sand. Our dead-blow design incorporates a solid steel slug (rather than sand in most dead-blow hammers), this provides you with a kinetic transfer of energy that multiplies your hitting force. If you have a job where light gentle tapping is required, you can remove the steel slug, and store it in the handle of the PSDB. We have put tremendous thought into the design of this hammer, from the various curves in the handle allowing for numerous choked up hand positions for lighter tapping, or a full handle grip for maximum force. The end of our handle isn’t just a clever storage area for the steel slug when not in use, since we have the third hammer tip on the end of the handle, you can produce very light gentle tapping force with the end of the handle. PSDB Hammer Includes: Hammer body/handle One brass tip One hardened steel tip One delrin (plastic) tip One steel dead-blow slug. Features All steel construction Precision CNC machined Made in the USA Interchangable tips Steel dead-blow slug Clear zinc plated for severe corrosion resistance
SPECS:
Total hammer weight 1 pound, 8.5 ounces
Deadblow weight 3.1 ounces
Delrin Head weight 0.5 ounces
10.5 inches tall
3.5 inches wide at the head faces
Head OD at the face is 0.971 inches
Head OD at the knurling is 1.12 inches
Scopri il martello dead-blow in acciaio di precisione PSDB di MAGNA-MATIC!
Contrariamente a tutti gli altri martelli disponibili, il PSDB è un martello in acciaio interamente realizzato con lavorazione CNC di precisione. Niente manici in legno economici o viti sovrastampate per le punte. Questo è un martello serio per un'accurata lavorazione delle armi: per colpire perni, punzoni e altro.
Il PSDB può avere 3 diversi materiali per le punte "a bordo" - una può essere avvitata su ciascun lato della testa del martello, e la terza si avvita nella parte inferiore del manico. Quindi, indipendentemente dal tipo di perno o dal tipo di finitura su cui potrebbe essere necessario colpire, puoi scegliere una punta dura o morbida che non danneggi per il lavoro.
Le punte sono tenute saldamente con grandi o-ring, quindi non si allenteranno mai. Il PSDB rappresenta un nuovo tipo di martello dead-blow; con il martello PSDB di Magna-Matic Defense non stai semplicemente colpendo la sabbia. Il nostro design dead-blow incorpora un proiettile in acciaio solido (anziché sabbia come nella maggior parte dei martelli dead-blow), fornendoti un trasferimento cinetico di energia che moltiplica la tua forza di impatto.
Se hai un lavoro che richiede colpi leggeri e delicati, puoi rimuovere il proiettile in acciaio e conservarlo nel manico del PSDB. Abbiamo dedicato una notevole attenzione al design di questo martello, dalle varie curve nel manico che consentono numerose posizioni di presa per colpi leggeri, a una presa completa del manico per la massima forza.
L'estremità del nostro manico non è solo un'area di stoccaggio intelligente per il proiettile in acciaio quando non è in uso; poiché abbiamo la terza punta del martello all'estremità del manico, puoi produrre una forza di colpo molto leggera e delicata con l'estremità del manico.
Il martello PSDB include:
- Corpo/manico del martello
- Una punta in ottone
- Una punta in acciaio temprato
- Una punta in delrin (plastica)
- Un proiettile dead-blow in acciaio
Caratteristiche:
- Costruzione interamente in acciaio
- Lavorazione CNC di precisione
- Prodotto negli USA
- Punte intercambiabili
- Proiettile dead-blow in acciaio
- Placcatura in zinco chiaro per resistenza alla corrosione severa
Specifiche:
- Peso totale del martello: 1 libbra, 8.5 once
- Peso dead-blow: 3.1 once
- Peso della testa in Delrin: 0.5 once
- Altezza: 10.5 pollici
- Larghezza alla testa: 3.5 pollici
- Diametro esterno della testa alla faccia: 0.971 pollici
- Diametro esterno della testa alla zigrinatura: 1.12 pollici