Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.604" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Mount per red dot di alta qualità per CZ Shadow 2
Il CZ SHADOW 2 LEUPOLD DELTAPOINT PRO SIGHT MOUNT e il CZ SHADOW 2 VORTEX LEUPOLD DELTAPOINT PRO SIGHT MOUNT sono progettati per offrire una soluzione di montaggio robusta e affidabile per i tuoi mirini ottici.
Caratteristiche principali:
- Materiale: Alluminio 7075
- Rivestimento: Hardcoat nero opaco
- Dimensioni: Lunghezza totale: 1.604", Larghezza totale: .99"
- Hardware di montaggio: (2) Viti a testa a bottone 6-32, (2) Viti a testa piatta 6-32, (1) Vite di fissaggio 6-32
- Compatibilità con red dot: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter
I mirini red dot di EGW sono progettati per essere installati da sinistra a destra (con la bocca rivolta in avanti). La slitta ha un conicità progressiva per facilitare l'installazione. Rimuovi semplicemente il mirino posteriore della tua arma e sostituiscilo con il nostro montaggio per installare il tuo Vortex Viper/Venom, Burris FastFire o Docter. Non sono necessarie modifiche; puoi rimuovere il nostro montaggio e ripristinare il tuo mirino posteriore in qualsiasi momento. Hardware di montaggio incluso.
Istruzioni per l'installazione:
- Rimuovi il mirino posteriore*
- Installa il montaggio EGW nella slitta
- Serra la vite di fissaggio (se applicabile)
- Posiziona il mirino red dot sul montaggio EGW (inserire un piccolo pezzo di carta tra il mirino red dot e il montaggio faciliterà la rimozione e manterrà il Loctite lontano dal mirino red dot).
- Applica Loctite blu sulle viti di montaggio fornite
- Serra le viti di montaggio a 15in/lbs
Note: 2 Viti a testa a bottone - Fornite per i mirini Vortex Viper e Venom. 2 Viti a testa piatta - Fornite per i mirini Burris FastFire e Docter. Le viti incluse con questo montaggio richiedono una chiave a brugola da 5/64'' per l'installazione.