Il Carrello è vuoto.

Carrello

0364 1955 195

Iscriviti alla Newsletter

SEEKINS PRECISION
AR-15/M16 ENHANCED BOLT CATCH

811452029613 100011243

Enables Easy Locking & Fast Bolt Release

Steel bolt catch features an enlarged lower portion that makes it easy to lock bolt to the rear. Enlarged upper portion allows fast bolt release, and “Diamond Texture” thumb pad gives positive engagement and enhances rifle’s appearance.

SPECS: Steel, Parkerized. 1-3/16" (3cm) long. Fits all standard AR-15s.

Altro...

Consente il Bloccaggio Facile & Rilascio Rapido del Carrello

Il fermo del carrello in acciaio presenta una parte inferiore ingrandita che facilita il bloccaggio del carrello in posizione arretrata. La parte superiore ingrandita consente un rilascio rapido del carrello, e il pad del pollice con "Diamond Texture" garantisce un ingaggio positivo e migliora l'aspetto del fucile.

SPECS: Acciaio, Parkerizzato. Lunghezza 1-3/16" (3cm). Adatto a tutti gli AR-15 standard.

Altro...

Punteggi dei clienti per SEEKINS PRECISION AR15 BOLT CATCH

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 2,9

Big upgrade over the stock part (20/05/2014)

I was drawn to this part because I found the bottom portion of a standard bolt catch to be inadequate when locking the bolt open. The enlarged and protruded bottom portion of this part solved that problem for me. It is machined well and of high quality. The only reason I did not give it 5 stars is because it is incompatible with the Magpul BAD lever or any equivalent device that attaches to a standard bolt release. This may or may not matter to you.

Easy Install, Easy Upgrade: Faster Bolt (21/06/2014)

Used for a RRA Entry Tactical Duty Rifle.
This simple upgrade makes it faster & easier to lock back and release the BCG.
No Qualms Here
Buy It! you wont regret it!

Will NOT work in Mega Side-Charging Upr (21/06/2014)

While this is a lovely bolt catch, it will NOT work in a Mega Arms Side-Charging Upper. There is not enough material milled out of the upper for this bolt catch to fit.

Out of spec (24/09/2014)

I have tried two of the Seekins enhanced bolt catch on different builds without success.

The first one would not lock the bolt open after firing the last round from several different magazines, and would not hold the bolt back even when manually locked back.

The second one I ordered would not fit into the receiver at all. It was a Seekins forged lower that I was building up. I measured both the lower and the bolt catch and the bolt catch was slightly oversized to the point that it would not fit.

I really like the design of the larger paddle, but they need to get their specs correct on this part.

Out of Spec Hole Diameter (23/11/2014)

I bought one of these about a year ago for the AR 15 that I was building and it worked perfectly. I decided to buy two more for my other AR's but they are both defective. The hole diameter is too small and they will not work freely. The hole diameter is the same size as the roll pin when it should be slightly larger. When I compared the hole sizes to the old bolt catch their is a very noticeable difference. I am guessing that they ran a whole batch of these with the wrong hole size and from the other review that I read Seekins Precision does not QA their parts! I think they need to remove the name "Precision" from their name since they say they make MIL SPEC parts when their parts aren't!

Didn't work for me (02/02/2015)

I've build around 11 ARs using Aero, Spikes, DPMS, Bushmaster and other lowers for myself and a few friends. I've always used the bolt catch from DPMS or CMMG lpk. On my last AR build (Aero lower) for myself I decided to put this item in for a more enhanced bolt catch. I wanted one bigger in both the catch and release areas.

Installation was like any bolt catch. It moved freely without the mag and it locked the bolt without the mag but when the mag came into play, it never locked itself. It seemed like it had problems moving, it felt tight with the mag in the mag well.

It looks good, good material, nice wide surface on both ends but not in spec.

Great upgrade (17/03/2016)

After my first carbine class I went in search of a bolt catch that had an enlarged bottom portion for locking the bolt open.

I found the Seekins and gave it a try. It worked perfectly and was exactly what I was looking for. Since then I've installed them in three other lowers and have had no problems with fit or function.

I've installed them in lowers from BCM, Spikes Tactical, and PSA.

No go (22/12/2016)

Love the feel of this catch, couldn't care about looks. I wanted a larger paddle and In return the bolt won't lock up on the last round. Happened after two months. I don't feel you should have to remove the paddle to clean it inside of 10000 rounds. And I find it funny that the stock catch never wore down on my service rifle.

Best uses..."target practice" only because this will make you one. Save your money and go stock!

Bent and locked up my 9mm carbine (30/07/2018)

I've run a few of these before without issue, but on the FIRST time I ran my 9mm carbine to slide-lock it bent this piece and locked up my PCC HARD. I had to use a screwdriver and a hammer to bend it back enough to tap it down. I could then slide my bolt forward and begin to repair. I had been using a box-stock factory bolt catch without issue prior to this. Not an upgrade and too soft. The one I had on my HD rifle is now coming off as well and replaced with something hardened.

Leggi più recensioni su brownells.com

39.9 39.9 1 EUR

N. prodotto: 100011243
SEEKINS PRECISION AR15 BOLT CATCH
Parti Fabbricante: 011510057 811452029613 Il fermo del carrello in acciaio presenta una parte inferiore ingrandita che facilita il bloccaggio del carrello in posizione arretrata. La parte superiore ingrandita consente un rilascio rapido del carrello, e il pad del pollice con "Diamond Texture" garantisce un ingaggio positivo e migliora l'aspetto del fucile.

39.9 EUR 4 39,90 € *

Tempi di consegna circa 12-16 giorni.
4 pz. nel magazzino USA

Caratteristiche: Adatto per: AR-15

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: AR-15 Peso della spedizione: 0,045kg Altezza di spedizione: 25mm Larghezza di spedizione: 69mm Lunghezza di spedizione: 198mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

Enables Easy Locking & Fast Bolt Release

SPECS: Steel, Parkerized. 1-3/16" (3cm) long. Fits all standard AR-15s.

Altro...

Consente il Bloccaggio Facile & Rilascio Rapido del Carrello

SPECS: Acciaio, Parkerizzato. Lunghezza 1-3/16" (3cm). Adatto a tutti gli AR-15 standard.

Altro...

Punteggi dei clienti per SEEKINS PRECISION AR15 BOLT CATCH

Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 2,9

Big upgrade over the stock part (20/05/2014)

Easy Install, Easy Upgrade: Faster Bolt (21/06/2014)

Used for a RRA Entry Tactical Duty Rifle.
This simple upgrade makes it faster & easier to lock back and release the BCG.
No Qualms Here
Buy It! you wont regret it!

Will NOT work in Mega Side-Charging Upr (21/06/2014)

While this is a lovely bolt catch, it will NOT work in a Mega Arms Side-Charging Upper. There is not enough material milled out of the upper for this bolt catch to fit.

Out of spec (24/09/2014)

Out of Spec Hole Diameter (23/11/2014)

Didn't work for me (02/02/2015)

Great upgrade (17/03/2016)

No go (22/12/2016)

Bent and locked up my 9mm carbine (30/07/2018)

Leggi più recensioni su brownells.com

Scelti da altri clientie

SIGHT PRO SIGHT MOVER - MGW MAIN SIGHT TOOL

MGW MAIN SIGHT TOOL
SIGHT PRO SIGHT MOVER

MGW

In magazzino

499,90 € *

Strumenti regolazione mire

4,9

SEEKINS PRECISION AR-15 BILLET MAGAZINE RELEASE BUTTON
AR-15/M16 BILLET MAGAZINE RELEASE BUTTON

SEEKINS PRECISION

In magazzino

21,90 € *

Sgancio caricatore

BROWNELLS AR-15 ARMORER'S WRENCH
AR-15 ARMORER'S WRENCH

BROWNELLS

In magazzino

74,90 € *

Chiavi

3,6

J P ENTERPRISES AR-15 SPRING KIT
AR-15 REDUCED POWER SPRING KIT

J P ENTERPRISES

In magazzino

26,90 € *

Molle grilletto

4,7

NORDIC COMPONENTS BENELLI 12GA EXTENSION NUT
EXTENSION TUBE NUT 12 GA

NORDIC COMPONENTS

Riordinato

79,90 € *

Accesso

Hai dimenticato la password?
Registrati

Social Media

Brownells.it

Catalogo prodotti

Ordinare

Customer Service

Benvenuti!

Benvenuti su Brownells.it, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Italia!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te!

Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.it per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.

Nel nostro negozio online potrai trovare oltre 60.000 prodotti, tra cui parti d'arma, accessori, utensili per armieri, materiale per ricarica e componenti di munizioni, e altri prodotti per mantenere, riparare e aggiornare le tue armi.