Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia
080860107
To complement our “Ring-Of-Steel” Action Wrench System, we’ve developed the only professional-quality Barrel Vise that will positively clamp and keep even the tightest barrel from turning during removal. Machined from solid steel for durability to service the barrel installation and removal needs of any gunsmith for years and years. Our exclusive four bolt system and extra-wide design generates so much holding force, the Brownells Barrel Vise must be firmly bolted to the stoutest bench or an immovable base to realize its full ­potential. Split barrel bushings come in a variety of sizes to fit many popular barrels (and some not-so-common ones) to make this universal Barrel Vise system the very first choice of ­professional gunsmiths. Steel Bushings provide years of service and have the necessary clamping power to break loose the tightest barrels. Aluminum Bushings also give a strong hold without risk of marring your barrel.  

SPECS: Blocks - Steel, blued. Top Block - 4-1/2" (11.4cm) x 3" (7.6cm) x 1-1/2" (3.8cm). Bottom Block - 7" (17.7cm) x 3" (7.6cm) x 1-1/8" (2.8cm). ­Includes 4, 1/2"-20 x 2" Allen head bolts. Bottom block is drilled and countersunk for 1/2" diameter mounting bolts. Bushings - C.R.S. Steel, blue finish or 6160 aluminum, natural finish. All bushings 3" long, -13/4" diameter. #4, 7, 8, 9, 10 and 11 are in a range of I.D.’s to closely match the shank diameters of most rifle barrels. #5 fits military Mauser 98 barrels. #6 is tapered to fit Remington factory .30-06 Sporter and other similar profile barrels. #12 & 13 are a special machined set of bushings for standard and heavy M14/M1A/M1 Garand barrels. #15 is for the FN FAL barrel. #16 is an aluminum bushing for ?" octagonal barrels. Steel and Aluminum Barrel Vise Sets come complete with the four ?"-20 tpi x 2" Allen head bolts, hex wrench, and bushings #4, #6, #7, #8, #9, #10 and #11. (Bushings #5, 12, 13, 14, 15 and 16 must be purchased separately).

419.9 419.9 2 EUR
N. prodotto: 080860107
BROWNELLS STEEL BARREL VISE SET Per completare il nostro sistema di chiavi per azione "Ring-Of-Steel", abbiamo sviluppato l'unico Morsetto per Canna di qualità professionale che garantirà di bloccare e mantenere ferma qualsiasi canna, anche la più stretta, durante la rimozione. Lavorato da un blocco solido di acciaio per durabilità, per soddisfare le esigenze di installazione e rimozione della canna di qualsiasi armaiolo per anni e anni. Il nostro esclusivo sistema a quattro bulloni e il design extra-largo generano una forza di tenuta così grande che il Morsetto per Canna Brownells deve essere saldamente fissato a una banca robusta o a una base immobile per realizzare il suo pieno potenziale. Le boccole divise per canna sono disponibili in una varietà di misure per adattarsi a molte canne popolari (e alcune meno comuni) per rendere questo sistema universale di Morsetto per Canna la prima scelta dei armaioli professionisti. Le boccole in acciaio garantiscono anni di servizio e hanno la necessaria potenza di serraggio per allentare le canne più strette. Le boccole in alluminio offrono anche una forte tenuta senza rischio di danneggiare la tua canna.
419.9 EUR 5 419,90 € *
Tempi di consegna circa 12-16 giorni.
5 pz. nel magazzino USA
Caratteristiche: Materiale: Acciaio

Top takeaways

  1. Il Morsetto per Canna Brownells, realizzato in acciaio per durabilità, utilizza un sistema a quattro bulloni per una forza di tenuta eccezionale.
  2. Le boccole divise per canna sono disponibili in acciaio e alluminio, adattandosi a molte canne popolari e garantendo anni di servizio.
  3. Il set include boccole specifiche per vari fucili, con alcune boccole da acquistare separatamente per adattarsi a modelli speciali.

Caratteristiche

Materiale: Acciaio Peso della spedizione: 8,278kg

Dettagli dell'elemento

Made in Usa




N. prodotto: 080860307
BROWNELLS ALUMINUM BARREL VISE SET Per completare il nostro sistema di chiavi per azione "Ring-Of-Steel", abbiamo sviluppato l'unico Morsetto per Canna di qualità professionale che garantirà di bloccare e mantenere ferma qualsiasi canna, anche la più stretta, durante la rimozione. Lavorato da un blocco solido di acciaio per durabilità, per soddisfare le esigenze di installazione e rimozione della canna di qualsiasi armaiolo per anni e anni. Il nostro esclusivo sistema a quattro bulloni e il design extra-largo generano una forza di tenuta così grande che il Morsetto per Canna Brownells deve essere saldamente fissato a una banca robusta o a una base immobile per realizzare il suo pieno potenziale. Le boccole divise per canna sono disponibili in una varietà di misure per adattarsi a molte canne popolari (e alcune meno comuni) per rendere questo sistema universale di Morsetto per Canna la prima scelta dei armaioli professionisti. Le boccole in acciaio garantiscono anni di servizio e hanno la necessaria potenza di serraggio per allentare le canne più strette. Le boccole in alluminio offrono anche una forte tenuta senza rischio di danneggiare la tua canna.
419.9 EUR 0 419,90 € *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Materiale: Alluminio

Top takeaways

  1. Il Morsetto per Canna Brownells è realizzato in acciaio solido per una durabilità eccezionale e utilizza un sistema a quattro bulloni per una forza di tenuta superiore.
  2. Le boccole divise per canna sono disponibili in varie misure per adattarsi a molte canne, rendendo il sistema universale per armaioli professionisti.
  3. Il set include boccole in acciaio e alluminio, offrendo opzioni per una forte tenuta senza rischi di danni alle canne.

Caratteristiche

Materiale: Alluminio Peso della spedizione: 6,055kg

Dettagli dell'elemento

Made in Usa

🔧 Scopri il VISE AND BUSHING SETS BROWNELLS, il Morsetto per Canna in acciaio di qualità professionale. Perfetto per armaioli, garantisce una tenuta sicura. 🌟 Acquista ora!

To complement our “Ring-Of-Steel” Action Wrench System, we’ve developed the only professional-quality Barrel Vise that will positively clamp and keep even the tightest barrel from turning during removal. Machined from solid steel for durability to service the barrel installation and removal needs of any gunsmith for years and years. Our exclusive four bolt system and extra-wide design generates so much holding force, the Brownells Barrel Vise must be firmly bolted to the stoutest bench or an immovable base to realize its full ­potential. Split barrel bushings come in a variety of sizes to fit many popular barrels (and some not-so-common ones) to make this universal Barrel Vise system the very first choice of ­professional gunsmiths. Steel Bushings provide years of service and have the necessary clamping power to break loose the tightest barrels. Aluminum Bushings also give a strong hold without risk of marring your barrel.  

SPECS: Blocks - Steel, blued. Top Block - 4-1/2" (11.4cm) x 3" (7.6cm) x 1-1/2" (3.8cm). Bottom Block - 7" (17.7cm) x 3" (7.6cm) x 1-1/8" (2.8cm). ­Includes 4, 1/2"-20 x 2" Allen head bolts. Bottom block is drilled and countersunk for 1/2" diameter mounting bolts. Bushings - C.R.S. Steel, blue finish or 6160 aluminum, natural finish. All bushings 3" long, -13/4" diameter. #4, 7, 8, 9, 10 and 11 are in a range of I.D.’s to closely match the shank diameters of most rifle barrels. #5 fits military Mauser 98 barrels. #6 is tapered to fit Remington factory .30-06 Sporter and other similar profile barrels. #12 & 13 are a special machined set of bushings for standard and heavy M14/M1A/M1 Garand barrels. #15 is for the FN FAL barrel. #16 is an aluminum bushing for ?" octagonal barrels. Steel and Aluminum Barrel Vise Sets come complete with the four ?"-20 tpi x 2" Allen head bolts, hex wrench, and bushings #4, #6, #7, #8, #9, #10 and #11. (Bushings #5, 12, 13, 14, 15 and 16 must be purchased separately).

In magazzino
449,90 € *
5
Newsletter