The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Altro...
Il Taper Crimp Die di Lee è realizzato in acciaio temprato progettato per superare i problemi di crimpatura causati da un design del die non adeguato. I proiettili giacchettati devono avere una scanalatura per la crimpatura.
Altro...
Punteggi dei clienti per LEE PRECISION LEE TAPER CRIMP DIE, 44 SPECIAL
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
Works well at about half the price(11/04/2014)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!
N. prodotto: 100053276 LEE PRECISION LEE TAPER CRIMP DIE, 44 SPECIAL Parti Fabbricante: 90784734307907846 Il Taper Crimp Die di Lee è realizzato in acciaio temprato progettato per superare i problemi di crimpatura causati da un design del die non adeguato. I proiettili giacchettati devono avere una scanalatura per la crimpatura.
21.9EUR121,90 €
*
Tempi di consegna circa 12-16 giorni. 1 pz. nel magazzino USA
Caratteristiche:Cartuccia: 44 SpecialMatrice tipo: Taper Crimp Dies
Cartuccia:
44 Special
Matrice tipo:
Taper Crimp Dies
Peso della spedizione: 0,091kgAltezza di spedizione: 30mmLarghezza di spedizione: 32mmLunghezza di spedizione: 114mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 100053274 LEE PRECISION LEE TAPER CRIMP DIE, 38 SPECIAL Parti Fabbricante: 90781734307907815 Il Taper Crimp Die di Lee è realizzato in acciaio temprato progettato per superare i problemi di crimpatura causati da un design del die non adeguato. I proiettili giacchettati devono avere una scanalatura per la crimpatura.
23.9EUR623,90 €
*
Tempi di consegna circa 12-16 giorni. 6 pz. nel magazzino USA
N. prodotto: 100053275 LEE PRECISION LEE TAPER CRIMP DIE, 40 S&W/ 10MM Parti Fabbricante: 90782734307907822 Il Taper Crimp Die di Lee è realizzato in acciaio temprato progettato per superare i problemi di crimpatura causati da un design del die non adeguato. I proiettili giacchettati devono avere una scanalatura per la crimpatura.
23.9EUR323,90 €
*
Tempi di consegna circa 12-16 giorni. 3 pz. nel magazzino USA
Caratteristiche:Cartuccia: 10 mm Aua, 40 S&WMatrice tipo: Taper Crimp Dies
N. prodotto: 100053279 LEE PRECISION LEE TAPER CRIMP DIE, 9MM Parti Fabbricante: 90780734307907808 Il Taper Crimp Die di Lee è realizzato in acciaio temprato progettato per superare i problemi di crimpatura causati da un design del die non adeguato. I proiettili giacchettati devono avere una scanalatura per la crimpatura.
21.9EUR821,90 €
*
Tempi di consegna circa 12-16 giorni. 8 pz. nel magazzino USA
Caratteristiche:Cartuccia: 9 mm LugerMatrice tipo: Taper Crimp Dies
N. prodotto: 100053278 LEE PRECISION LEE TAPER CRIMP DIE, 45 ACP Parti Fabbricante: 90785734307907853 Il Taper Crimp Die di Lee è realizzato in acciaio temprato progettato per superare i problemi di crimpatura causati da un design del die non adeguato. I proiettili giacchettati devono avere una scanalatura per la crimpatura.
23.9EUR223,90 €
*
Tempi di consegna circa 12-16 giorni. 2 pz. nel magazzino USA
Caratteristiche:Cartuccia: 45 Aua (ACP)Matrice tipo: Taper Crimp Dies
N. prodotto: 100053277 LEE PRECISION LEE TAPER CRIMP DIE, 45 COLT Parti Fabbricante: 90786734307907860 Il Taper Crimp Die di Lee è realizzato in acciaio temprato progettato per superare i problemi di crimpatura causati da un design del die non adeguato. I proiettili giacchettati devono avere una scanalatura per la crimpatura.
Scopri il Taper Crimp Die di LEE PRECISION per il 44 Special. Realizzato in acciaio temprato per una crimpatura perfetta. Ideale per proiettili giacchettati. 🔫✨ Learn more!
The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Altro...
Il Taper Crimp Die di Lee è realizzato in acciaio temprato progettato per superare i problemi di crimpatura causati da un design del die non adeguato. I proiettili giacchettati devono avere una scanalatura per la crimpatura.
Altro...
Punteggi dei clienti per LEE PRECISION LEE TAPER CRIMP DIE, 44 SPECIAL
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
Works well at about half the price(11/04/2014)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!