Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia

EGW
DESERT EAGLE (PRE 2017) TRIJICON RMR SIGHT MOUNT

841370116737 296000562
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Trijicon RMR Please take note to the Pre 2017 and Post 2017 differences when placing your order. Pre 2017 rear shelf behind the dovetail is .187" Post 2017 rear shelf behind the dovetail is .120" Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trjicon RMR The flat head screws that are included with this mount require a 5/64'' allen wrench for installation.
84.9 84.9 1 EUR
N. prodotto: 296000562
EGW DESERT EAGLE (PRE 2017) TRIJICON RMR SIGHT MOUNT
Parti Fabbricante: 49503 841370116737 Materiale: Alluminio 7075 Rivestimento: Hardcoat Nero Opaco Lunghezza Totale: 1.811" Larghezza Totale: .99" Materiale di Montaggio: (2) Viti a Testa Piatta 6-32, (1) Vite di Regolazione 6-32 Adattamento per Red Dot: Trijicon RMR Si prega di prestare attenzione alle differenze Pre 2017 e Post 2017 quando si effettua l'ordine. Pre 2017 lo scaffale posteriore dietro il coda di rondine è di .187" Post 2017 lo scaffale posteriore dietro il coda di rondine è di .120" Semplicemente rimuovere il mirino posteriore dalla vostra arma e sostituirlo con il nostro supporto per montare il vostro Trijicon RMR. Non sono richieste modifiche. È possibile rimuovere il nostro supporto e ripristinare il mirino posteriore in qualsiasi momento. Materiale di montaggio incluso. Istruzioni per l'installazione Rimuovere il mirino posteriore* Installare il Supporto per Mirino EGW nel coda di rondine Stringere la vite di regolazione (se applicabile) Posizionare il mirino red dot sul Supporto per Mirino EGW (inserire un piccolo pezzo di carta tra il mirino red dot e il supporto del mirino faciliterà la rimozione e impedirà al Loctite di aderire al mirino red dot.) Applicare Loctite blu alle viti di montaggio fornite Serrare le viti di montaggio a 15in/lbs 2 Viti a Testa Piatta - Fornite per Trijicon RMR Le viti a testa piatta incluse con questo supporto richiedono una chiave allen da 5/64'' per l'installazione.
84.9 EUR 0 84,90 € *
Avvisa quando diventa disponibile
Esaurito. Nessuna data di consegna nota.
Caratteristiche: Adatto per: Magnum Research Colore: Nero Materiale: Alluminio Modello: Desert Eagle Numero di basi: 1 pezzo Tipo: Tattico

Top takeaways

  1. Il supporto per mirino EGW è realizzato in alluminio 7075 con rivestimento hardcoat nero opaco, compatibile con il Trijicon RMR.
  2. È progettato per armi Desert Eagle pre 2017 con scaffale posteriore dietro il coda di rondine di .187".
  3. Il montaggio è semplice e non richiede modifiche permanenti all'arma, permettendo di ripristinare il mirino posteriore in qualsiasi momento.

Caratteristiche

Adatto per: Magnum Research Colore: Nero Materiale: Alluminio Modello: Desert Eagle Numero di basi: 1 pezzo Tipo: Tattico Peso della spedizione: 0,041kg Altezza di spedizione: 25mm Larghezza di spedizione: 89mm Lunghezza di spedizione: 140mm

Dettagli dell'elemento

Made in Usa



Supporto Trijicon RMR per Desert Eagle pre 2017. Facile da installare, in alluminio 7075 con rivestimento nero opaco. 🦅🔧 Scopri di più e ordina ora!

Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Trijicon RMR Please take note to the Pre 2017 and Post 2017 differences when placing your order. Pre 2017 rear shelf behind the dovetail is .187" Post 2017 rear shelf behind the dovetail is .120" Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trjicon RMR The flat head screws that are included with this mount require a 5/64'' allen wrench for installation.
Newsletter