Il Carrello è vuoto.

Carrello

0364 1955 195

Iscriviti alla Newsletter

SILENCERCO
BERETTA 92FS/M9 THREADED BARREL

816413022580 100023757

Sets You Up To Shoot Your Beretta With a Sound Suppressor

The Silencerco Beretta 92F / 92FS / M9 Threaded Pistol Barrel turns your “Plain-Jane” Beretta into a suppressor ready host. The Silencerco Beretta 92F / 92FS / M9 Threaded Pistol Barrel does not require an XL piston. A normal ½"-28 tpi piston will provide reliable function. Threaded 1/2"-28 to accept a wide variety of pistol suppressors 1-10" twist rate Machined from 416R stainless steel Nonreflective black nitride finish Silencerco's Beretta 92F / 92FS / M9 Threaded Pistol Barrel comes ready drop-in into your pistol, and each ships with a thread protector to guard against damage to the threads when you're shooting unsuppressed.

Altro...

Ti Prepara a Sparare con la tua Beretta Usando un Soppressore Acustico

La canna filettata per pistola Silencerco Beretta 92F / 92FS / M9 trasforma la tua Beretta in una piattaforma pronta per il soppressore. La canna filettata per pistola Silencerco Beretta 92F / 92FS / M9 non richiede un pistone XL. Un normale pistone da ½"-28 tpi garantirà un funzionamento affidabile. Filettatura 1/2"-28 per accettare una vasta gamma di soppressori per pistola. Passo di rigatura 1-10". Realizzata in acciaio inossidabile 416R. Finitura nera opaca antiriflesso. La canna filettata per pistola Silencerco Beretta 92F / 92FS / M9 è pronta per essere inserita nella tua pistola e ogni canna viene fornita con un protettore di filettatura per proteggere i filetti quando si spara senza soppressore.

Altro...

Punteggi dei clienti per SILENCERCO BERETTA 92FS/M9 THREADED BARREL

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 3,9

Great barrel. (07/08/2017)

I picked up a used Beretta 92FS and this barrel went on sale the following day. Purchased the parts needed to complete the barrel assembly from Beretta. I took the gun to the range this past weekend and put 100 rounds through it with and without a supressor. Flawless. Great addition to the gun.

Bad experience, possible lemon (21/09/2017)

My well-used locking block would NOT fit into this Silencerco threaded barrel without modification - modification I wasn't willing to do. I initially thought the locking block was catching at the rear of the barrel, but it's also possible that the groove in the front was machined too narrowly, making the locking block unable to pivot all the way down. It would take a good amount of sanding for the locking block to slide freely like it does in my OEM Beretta barrel. IMO, this is unacceptable for a part that's A) supposedly "drop-in", and B) made for one of the most common supressor-hosts on the market. I should note this could have just been a lemon, or part of a bad batch (9/2017). Machining quality wasn't great, either, as there were machining lines around the chamber area, and the thread protector was not as well finished as my Silencerco Glock 34 barrel's, which I am COMPLETELY satisfied with. This 92 barrel, though, will be going back to Brownells as my first-ever return.

Silencerco Beretta 92FS Barrel Fitment (22/12/2017)

It's a shame I had to return this barrel. A factory new Beretta Locking Block would not fit properly. Had to almost force the block into position in the barrel then the block would not move/pivot as it should. This should be a drop in fit and I will not do any fitting to make it work.

Works with military surplus 92s model (17/02/2018)

I bought a beretta 92s model and wanted to shoot surpressed. I was pleasenly surprised that it dropped right in. I also bought a factory beretta upgraded locking block kit from brownells so I didnât have to reuse the original block from the old barrel.

The barrel fit and finished is just what I was hoping for and now I can use my liberty mystic x :)

Happy shooting!

Nice upgrade! (03/03/2018)

Silencerco has a winner with the Beretta 92 threaded barrel upgrade. I wanted to get my 92fs suppressor ready and they have it at a great price. Switching out the locking block from old to new was simple and easy. After the install, I gave it a test with 250 rounds and I found no differences at all with ..wellâ¦.. anything! It performed flawlessly and with same accuracy as I know my weapon.

This barrel is not chrome-lined like the Beretta original, however it is made of 416R steel with the same twist rate. After my test of 250, I cleaned and inspected the barrel and found no issues. I consider this a great choice for an upgrade and recommend if youâre ready to upgrade.

92s (21/05/2018)

Had to take a dremmel to it in order for the locking block to fit item needs a minor gunsmithing note added i by no means am one but just had to remove a few 1000âs of an inch. Fires very well no FTE or FTF on it yet. I had to send my HK barrel back because it FTE If itâs a range toy by all means go for it, for EDC I wouldnât trust anything but the original manufacturer barrels.

Works nice (11/10/2018)

This works pretty nice. I orderd a piston from silencerco to swap out on my osprey can so I can use it with this that I'm still waiting on, but I put around 250 rounds through it just with the barrel alone. It worked well while I was hitting a bunch of steel targets and using various ammo. I used the locking block from my stock barrel. There is a pin to knock out, then you just slide the little rear pin out and then the block can come out, I reused the pins on the new barrel as well. The extra little bit of barrel is also kind of cool I think. It will stick out of your holsters a little though. The one thing that I had after install was some stiffness with the slide. Just make sure you lube everything and rack it a good number of times to help break it in some before you shoot so that that break in process can go smoothly as well. I did have some hangups with some reloads but I think that fault was on my end and some 147gr winchester ammo a friend had me try, it did get stuck a couple times. I don't know if that was all just breakin kinks or what but my 124gr and 115gr ammo ran perfect. 124gr is my favored ammo for the full size 9mm.

Leggi più recensioni su brownells.com

334.9 334.9 1 EUR

N. prodotto: 100023757
SILENCERCO BERETTA 92FS/M9 THREADED BARREL
Parti Fabbricante: AC2291 816413022580 La canna filettata per pistola Silencerco Beretta 92F / 92FS / M9 trasforma la tua Beretta in una piattaforma pronta per il soppressore. La canna filettata per pistola Silencerco Beretta 92F / 92FS / M9 non richiede un pistone XL. Un normale pistone da ½"-28 tpi garantirà un funzionamento affidabile. Filettatura 1/2"-28 per accettare una vasta gamma di soppressori per pistola. Passo di rigatura 1-10". Realizzata in acciaio inossidabile 416R. Finitura nera opaca antiriflesso. La canna filettata per pistola Silencerco Beretta 92F / 92FS / M9 è pronta per essere inserita nella tua pistola e ogni canna viene fornita con un protettore di filettatura per proteggere i filetti quando si spara senza soppressore.

334.9 EUR 0 334,90 € *

È un Contattateci per ordinare

Prodotto acquistabile in backorder. Per prezzo e disponibilità contattaci.

Caratteristiche: Adatto per: Beretta Barrel Length: 4.9'' Cartuccia: 9 mm Luger Finitura: Nero Modello: M9, 92F/FS Tipo: Filettato

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Restrizioni

È un Contattateci per ordinare

Caratteristiche

Adatto per: Beretta Barrel Length: 4.9'' Cartuccia: 9 mm Luger Finitura: Nero Modello: 92F/FS,M9 Tipo: Filettato Peso della spedizione: 0,159kg Altezza di spedizione: 48mm Larghezza di spedizione: 46mm Lunghezza di spedizione: 203mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c

Sets You Up To Shoot Your Beretta With a Sound Suppressor

Altro...

Ti Prepara a Sparare con la tua Beretta Usando un Soppressore Acustico

Altro...

Punteggi dei clienti per SILENCERCO BERETTA 92FS/M9 THREADED BARREL

Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 3,9

Great barrel. (07/08/2017)

Bad experience, possible lemon (21/09/2017)

Silencerco Beretta 92FS Barrel Fitment (22/12/2017)

Works with military surplus 92s model (17/02/2018)

Nice upgrade! (03/03/2018)

92s (21/05/2018)

Works nice (11/10/2018)

Leggi più recensioni su brownells.com

Accesso

Hai dimenticato la password?
Registrati

Social Media

Brownells.it

Catalogo prodotti

Ordinare

Customer Service

Benvenuti!

Benvenuti su Brownells.it, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Italia!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te!

Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.it per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.

Nel nostro negozio online potrai trovare oltre 60.000 prodotti, tra cui parti d'arma, accessori, utensili per armieri, materiale per ricarica e componenti di munizioni, e altri prodotti per mantenere, riparare e aggiornare le tue armi.