Helps You Fit The Standing Lugs On Oversized Barrels
Three essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case.
SPECS: Barrel Holder - Steel. Approximately 3.5" (9cm) long .44" (1.1cm) O.D. Barrel Lug Cutter - Carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long.
Altro...
Ti Aiuta a Montare le Tacche di Bloccaggio su Canne Sovradimensionate
Tre strumenti essenziali lavorano insieme per aiutarti a montare con successo canne sovradimensionate. Il Supporto per Canna blocca la canna nel carrello per permetterti di tagliare il materiale in eccesso sulle tacche con le Taglierine per Tacche della Canna in carburo incluse. Inoltre, lo Spingi-carrello mantiene il carrello in posizione avanzata per esercitare una pressione costante sulla canna durante il taglio. Fornito in una pratica valigetta.
SPECIFICHE: Supporto per Canna - Acciaio. Lunghezza approssimativa 3.5" (9cm), diametro esterno 0.44" (1.1cm). Taglierina per Tacche della Canna - Carburo. Taglierina da 0.186" e 0.195"; include manico. Spingi-carrello - asta in acciaio, manico in plastica. Lunghezza 6.5" (16.5cm).
Altro...
Punteggi dei clienti per BROWNELLS 1911 BARREL HOLDER
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4,7
Works SPLENDIDLY!(01/03/2011)
I used this kit to fit a "drop-in" match barrel that wasn't quite so drop-in. When used with care and per the instructions, this kit provides a very tight barrel-to-slide lock-up that pleasingly "snicks" into battery during that last little bit of forward slide movement. I used the .186 cutter and polished by hand for the perfect fit. Enables the hobbyist gunsmith to fit a barrel just like a pro. You'll likely need a longer barrel link for best results, so I also recommend buying a packaged set of links containing various lengths. Rather than using the furnished slide pusher, I just applied steady pressure with my thumb on the back of the slide until it aligned perfectly with the back of the frame. A very slick tool.
lug fitting kit(02/11/2015)
does what it should ,haven' t used the slide pusher. Have not used the guide, rod every slide I worked with of late was cut for a reverse plug
Right tool for proper lug fitting.(20/05/2011)
Makes the job of fitting up an accurate 1911 a snap.
N. prodotto: 080711100 BROWNELLS 1911 BARREL HOLDER050806104556 Tre strumenti essenziali lavorano insieme per aiutarti a montare con successo canne sovradimensionate. Il Supporto per Canna blocca la canna nel carrello per permetterti di tagliare il materiale in eccesso sulle tacche con le Taglierine per Tacche della Canna in carburo incluse. Inoltre, lo Spingi-carrello mantiene il carrello in posizione avanzata per esercitare una pressione costante sulla canna durante il taglio. Fornito in una pratica valigetta.
33.9EUR033,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Adatto per:
1911
Modello:
Commander,Government,Officers
Peso della spedizione: 0,091kgAltezza di spedizione: 8mmLarghezza di spedizione: 79mmLunghezza di spedizione: 165mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 080000058 BROWNELLS 1911 LUG CUTTER HANDLE ONLY Tre strumenti essenziali lavorano insieme per aiutarti a montare con successo canne sovradimensionate. Il Supporto per Canna blocca la canna nel carrello per permetterti di tagliare il materiale in eccesso sulle tacche con le Taglierine per Tacche della Canna in carburo incluse. Inoltre, lo Spingi-carrello mantiene il carrello in posizione avanzata per esercitare una pressione costante sulla canna durante il taglio. Fornito in una pratica valigetta.
49.9EUR5149,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
N. prodotto: 080746001 BROWNELLS 1911 SLIDE PUSHER Parti Fabbricante: 45SLIDEPUSHER050806104341 Tre strumenti essenziali lavorano insieme per aiutarti a montare con successo canne sovradimensionate. Il Supporto per Canna blocca la canna nel carrello per permetterti di tagliare il materiale in eccesso sulle tacche con le Taglierine per Tacche della Canna in carburo incluse. Inoltre, lo Spingi-carrello mantiene il carrello in posizione avanzata per esercitare una pressione costante sulla canna durante il taglio. Fornito in una pratica valigetta.
34.9EUR1334,90 €
*
Tempi di consegna circa 12-16 giorni. Più di 10 pz. nel magazzino USA
N. prodotto: 080000089 BROWNELLS 1911 AUTO LUG FITTING KIT Tre strumenti essenziali lavorano insieme per aiutarti a montare con successo canne sovradimensionate. Il Supporto per Canna blocca la canna nel carrello per permetterti di tagliare il materiale in eccesso sulle tacche con le Taglierine per Tacche della Canna in carburo incluse. Inoltre, lo Spingi-carrello mantiene il carrello in posizione avanzata per esercitare una pressione costante sulla canna durante il taglio. Fornito in una pratica valigetta.
259.9EUR0259,90 €
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Helps You Fit The Standing Lugs On Oversized Barrels
Three essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case.
SPECS: Barrel Holder - Steel. Approximately 3.5" (9cm) long .44" (1.1cm) O.D. Barrel Lug Cutter - Carbide. .186" cutter and .195" cutter; includes handle. Slide pusher- steel shaft, plastic handle. 6.5" (16.5cm) long.
Altro...
Ti Aiuta a Montare le Tacche di Bloccaggio su Canne Sovradimensionate
Tre strumenti essenziali lavorano insieme per aiutarti a montare con successo canne sovradimensionate. Il Supporto per Canna blocca la canna nel carrello per permetterti di tagliare il materiale in eccesso sulle tacche con le Taglierine per Tacche della Canna in carburo incluse. Inoltre, lo Spingi-carrello mantiene il carrello in posizione avanzata per esercitare una pressione costante sulla canna durante il taglio. Fornito in una pratica valigetta.
SPECIFICHE: Supporto per Canna - Acciaio. Lunghezza approssimativa 3.5" (9cm), diametro esterno 0.44" (1.1cm). Taglierina per Tacche della Canna - Carburo. Taglierina da 0.186" e 0.195"; include manico. Spingi-carrello - asta in acciaio, manico in plastica. Lunghezza 6.5" (16.5cm).
Altro...
Punteggi dei clienti per BROWNELLS 1911 BARREL HOLDER
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4,7
Works SPLENDIDLY!(01/03/2011)
I used this kit to fit a "drop-in" match barrel that wasn't quite so drop-in. When used with care and per the instructions, this kit provides a very tight barrel-to-slide lock-up that pleasingly "snicks" into battery during that last little bit of forward slide movement. I used the .186 cutter and polished by hand for the perfect fit. Enables the hobbyist gunsmith to fit a barrel just like a pro. You'll likely need a longer barrel link for best results, so I also recommend buying a packaged set of links containing various lengths. Rather than using the furnished slide pusher, I just applied steady pressure with my thumb on the back of the slide until it aligned perfectly with the back of the frame. A very slick tool.
lug fitting kit(02/11/2015)
does what it should ,haven' t used the slide pusher. Have not used the guide, rod every slide I worked with of late was cut for a reverse plug
Right tool for proper lug fitting.(20/05/2011)
Makes the job of fitting up an accurate 1911 a snap.