Il Carrello è vuoto.

Carrello

0364 1955 195

Iscriviti alla Newsletter

RANCH PRODUCTS
10/22® EXTENDED MAGAZINE RELEASE

746122100

Compact Shape Is Faster To Hit; Won't Get In The Way

Extends half an inch farther out than the "flush" factory release so it's easier to hit and operate when you're in a hurry to change magazines. Thin, compact shape won't poke you in the back if you carry your rifle in a sling. Installs without gunsmithing.

SPECS: CM steel, blue, matte finish. Extends .430" (11mm) from bottom of receiver.

Altro...

Forma Compatta Più Rapida da Premere; Non Dà Fastidio

Si estende di mezzo pollice in più rispetto al rilascio di fabbrica "a filo", rendendolo più facile da premere e da operare quando sei di fretta nel cambiare i caricatori. Forma sottile e compatta che non ti pungolerà nella schiena se porti il tuo fucile con una tracolla. Si installa senza la necessità di un armaiolo.

SPECS: Acciaio CM, blu, finitura opaca. Si estende di .430" (11mm) dal fondo del ricevitore.

Altro...

Punteggi dei clienti per RANCH PRODUCTS BLUE EXTENDED MAG RELEASE

Numero di punteggi: 12
Da brownells.com: 12
Punteggio medio: 4,3

10/22 SS Ext. Mag Release (02/10/2011)

Firstly, easy to install. Ejects magazines without effort. However, the corners are sure to poke you pretty hard. It could use some buffing out because if you look at the photo, which I didn't, there are a lot of tool marks. But you won't see it once it's installed but I can see what looks like a cracks or other squiggy looking folds. Is this part a casting poured from a mold?

Work's great (10/04/2010)

Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.

Size is decieving (28/08/2010)

When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.

Very good for older 10/22's (10/09/2010)

Older 10/22's need these releases. Maybe that's why new ones come with similar ones installed?

Only one problem: The description said it is blued, but mine is parkerized. Not a problem, but (barely) worth noting. Parkerized steel is more rust-resistant than blued.

Working as expected (02/02/2011)

Easy to install and works like expected.

vast improvement over stock mag. release (18/06/2011)

This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.

Greatly eases releasing a magazine (19/10/2011)

Factory magazine release was stiff and did not drop the magazine easily, had to get a good grip on the magazine and pull or flip it out with a screw driver/car key.
This magazine release is as easy as pushing the lever with a knuckle and the magazine will drop free.
Basically how the factory release should be, I highly recommend this to anyone with a 10/22.

Great product! (13/06/2012)

It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.

Great design, will last a lifetime (04/01/2014)

All steel, dimensionally perfect for hi-cap magazines. This is the only mag catch that I tried to accommodate the Pro-Mag Archangel Nomad magzine with sleeve, except the vintage Eagle polymer magazine catch of the 1980's. I would have given it a 5-star if the part has been serrated for non-slip operation and aesthetics. I have added a 20 l.p.i. on the paddle and it work even better and looks phenomenal. Excellent price tag.

What was looking for (29/11/2016)

Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory

Much needed upgrade (20/02/2017)

Solid replacement for the flimsy plastic and far too small original release.

Easy to swap out and SOLID.

Only gripe is the edge seeing that the mag release and bolt release are in tight quarters. The edges are not sharp per say but would serve tiny and weaker hands much better to be rounded out. I am not a small shooter nor have weak hands and this is an annoyance for me.

A side note, I will never buy Ruger again!!!! the "need" for this product and others on the 10-22 are ridiculous. The 10-22 is supposed to be one of the most reliable platforms in existance and was purchaed for a new shooter. I have had to perform more modifications and cleaning up from a lack of proper fit or finish due to Ruger manufacturing.

Works well, but dimensions are small. (05/09/2018)

Good quality and very sturdy. It functions very well, not too long and not too short. My only issue is the dimensions are on the small side, making the part sit loosely in the trigger. It even rattles. Even when a magazine is inserted it will rattle. This could give away your position if your sneaking up on game. Other than that it works.

Leggi più recensioni su brownells.com

27.9 27.9 1 EUR

N. prodotto: 746122100
RANCH PRODUCTS BLUE EXTENDED MAG RELEASE
Parti Fabbricante: NONE Si estende di mezzo pollice in più rispetto al rilascio di fabbrica "a filo", rendendolo più facile da premere e da operare quando sei di fretta nel cambiare i caricatori. Forma sottile e compatta che non ti pungolerà nella schiena se porti il tuo fucile con una tracolla. Si installa senza la necessità di un armaiolo.

27.9 EUR 26 27,90 € *

Tempi di consegna circa 12-16 giorni.
Più di 10 pz. nel magazzino USA

Caratteristiche: Adatto per: Ruger Modello: 10/22

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: Ruger Modello: 10/22 Peso della spedizione: 0,023kg Altezza di spedizione: 13mm Larghezza di spedizione: 18mm Lunghezza di spedizione: 94mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

Compact Shape Is Faster To Hit; Won't Get In The Way

SPECS: CM steel, blue, matte finish. Extends .430" (11mm) from bottom of receiver.

Altro...

Forma Compatta Più Rapida da Premere; Non Dà Fastidio

SPECS: Acciaio CM, blu, finitura opaca. Si estende di .430" (11mm) dal fondo del ricevitore.

Altro...

Punteggi dei clienti per RANCH PRODUCTS BLUE EXTENDED MAG RELEASE

Numero di punteggi: 12
Da brownells.com: 12
Punteggio medio: 4,3

10/22 SS Ext. Mag Release (02/10/2011)

Work's great (10/04/2010)

Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.

Size is decieving (28/08/2010)

When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.

Very good for older 10/22's (10/09/2010)

Working as expected (02/02/2011)

Easy to install and works like expected.

vast improvement over stock mag. release (18/06/2011)

This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.

Greatly eases releasing a magazine (19/10/2011)

Great product! (13/06/2012)

It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.

Great design, will last a lifetime (04/01/2014)

What was looking for (29/11/2016)

Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory

Much needed upgrade (20/02/2017)

Works well, but dimensions are small. (05/09/2018)

Leggi più recensioni su brownells.com

Scelti da altri clientie

MAGPUL AR-15 PMAG GEN M3 MAGAZINE 223/5.56 20RD POLYMER BLACK 1PK
AR-15 20RD PMAG GEN M3 MAGAZINE 223/5.56

MAGPUL

ATTENZIONE: prima dell'acquisto leggi l'informativa che trovi nel banner giallo in homepage! Per ordinare scrivi a assistenzaclienti@brownells.it inviando copia di documenti in corso di validità che attestino l'appartenenza ad una delle categorie autorizzate all'acquisto.

29,90 € *

Caricatori | Magazines

WOLFF KIT 18055
M1 CARBINE TUNE-UP SPRING KIT

WOLFF

In magazzino

27,90 € *

Molle

ALANGATOR. TRIMAG 10/22® MAG COUPLER
10/22® TRIMAG MAGAZINE COUPLER

ALANGATOR.

Riordinato

22,90 € *

4,8

SINCLAIR INTERNATIONAL BENCHREST TARGETS ON A ROLL 250 PACK
BENCHREST TARGETS ON A ROLL (250)

SINCLAIR INTERNATIONAL

Non disponibile

Bersagli in carta

WOLFF KIT 18075 TUNE-UP PAK
RUGER® 10/22® RIFLE TUNE-UP KITS

WOLFF

Riordinato

16,90 € *

Molle

4,3

Accesso

Hai dimenticato la password?
Registrati

Social Media

Brownells.it

Catalogo prodotti

Ordinare

Customer Service

Benvenuti!

Benvenuti su Brownells.it, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Italia!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te!

Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.it per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.

Nel nostro negozio online potrai trovare oltre 60.000 prodotti, tra cui parti d'arma, accessori, utensili per armieri, materiale per ricarica e componenti di munizioni, e altri prodotti per mantenere, riparare e aggiornare le tue armi.