XRT Series X-Rings, bringing a whole new level of beauty and precision into an extremely rugged Picatinny platform scope mount. The X-Rings have been built from the bottom up to provide the extreme precision and accuracy that TPS rings have been known for over the last two decades. The ring bases begin from a solid billet of 7075-T6 aluminum and then machined with our unique Double-Lug Picatinny recoil shoulders from the solid billet. We have designed and engineered the Double-Lug recoil system to allow the parallelism and perpendicularity of the lugs to the ring bore to be within .0002, thereby providing repeatability that no other mount in the world with similar integrated lugs has done before. The X-Rings are specifically designed for the Mil-STD 1913 rail system. Because of the Double-Lug system, they do require two (2) accompanied cross-slots in a 1913 cross-slot configuration. The ring caps are secured with Four (4) 8-32 x 1/2″ Camcar-Textron Torx drive screws and with the same unique design that allows you to tighten the left side of the cap, then the right side without the scope rotating. The edges and corners are fully radiused, preventing snagging, and providing a beautiful appearance to your rifle. The rings are securely attached to your rail with an oversized clamp system using Two (2) 8-32 x 1/2″ Camcar-Textron Torx screws, preventing any chance your rings will loosen or move once installed. With unparalleled precision and holding force, and sleek design, these will meet the extreme expectations of any class shooter. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. .700″ (17.8mm) wide. Height measured from the top of base to center of the ring. 30mm – High: .1.075″ (31.11mm).
Scopri il nuovo livello di bellezza e precisione con gli XRT X-RINGS!
La serie XRT X-Rings porta un nuovo standard di bellezza e precisione in una piattaforma di montaggio per ottiche Picatinny estremamente robusta. Gli X-Rings sono stati progettati e costruiti per fornire l'estrema precisione e accuratezza che i ring TPS sono noti per offrire da oltre due decenni.
Le basi degli anelli iniziano da un billette solido di alluminio 7075-T6, lavorato con i nostri unici spalle di rinculo Double-Lug Picatinny. Abbiamo progettato e ingegnerizzato il sistema di rinculo Double-Lug per garantire che la parallelità e la perpendicolarità delle linguette rispetto al foro dell'anello siano entro .0002, offrendo così una ripetibilità che nessun altro montaggio al mondo con linguette integrate simili ha mai raggiunto.
Gli X-Rings sono specificamente progettati per il sistema di rotaie Mil-STD 1913. A causa del sistema Double-Lug, richiedono due (2) slot incrociati accompagnati in una configurazione di slot incrociati 1913. I coperchi degli anelli sono fissati con quattro (4) viti Torx Camcar-Textron 8-32 x 1/2″ e con lo stesso design unico che consente di stringere il lato sinistro del coperchio e poi il lato destro senza che l'ottica ruoti.
I bordi e gli angoli sono completamente arrotondati, prevenendo impigliamenti e fornendo un aspetto elegante al tuo fucile. Gli anelli sono saldamente attaccati alla tua rotaia con un sistema di morsetti sovradimensionato utilizzando due (2) viti Torx Camcar-Textron 8-32 x 1/2″, prevenendo qualsiasi possibilità che gli anelli si allentino o si muovano una volta installati.
Con una precisione e una forza di tenuta senza pari, e un design elegante, questi anelli soddisferanno le aspettative estreme di qualsiasi tiratore di classe.
SPECIFICHE:
- Alluminio Lega 7075-T651
- Colore: nero opaco, anodizzato duro secondo gli standard Mil-A-8625
- Larghezza: .700″ (17.8mm)
- Altezza misurata dalla parte superiore della base al centro dell'anello
- 30mm – Alto: .1.075″ (31.11mm)