SWITCHBACK 2.0 LARGE FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® 2.0 adds a multi-function finger ring and robust pocket clip to your tactical flashlight. It mounts securely between the light’s tailcap and body, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. The SwitchBack® 2.0 is the next evolution in the innovative SwitchBack Flashlight Ring product line. It incorporates new features and refinements based on thousands of hours of use by our subject matter experts and customers. The SwitchBack mounts between the tailcap and body of your flashlight, making it secure regardless of impact, moisture, and heat/cold changes. FEATURES: SwitchBacks can be used with handguns or long guns. It allows the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. New for SwitchBack 2.0: A finger ring that releases under heavy force/torque but can be reset. A stronger pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wider thumb rest with traction features. Small crush ribs on the SwitchBack 2.0’s lip that create a custom fit across a broader range of lights. An aluminum spacer that expands compatibility to Streamlight HL and HL-X flashlights and other manufacturers with similar designs. Installation For installation, first try installing the SwitchBack on your light without use of the O-ring or aluminum washer. Simply unscrew the tailcap, add the SwitchBack, and rescrew the tailcap back on. If the light does not activate upon use of the tailcap switch with the SwitchBack installed, try installing the aluminum washer as shown in the diagram below. Streamlight models tend to require the aluminum washer, but may not, depending on the tailcap features of the light. Elzetta and Surefire models do not usually require the aluminum washer, but users may find that addition of the rubber O-ring will help to stabilize the position of the SwitchBack
Scopri il nuovo SwitchBack 2.0: l'accessorio indispensabile per la tua torcia tattica!
Il SwitchBack® 2.0 è un anello per torcia di grandi dimensioni con clip per tasca, progettato per migliorare l'ergonomia e la funzionalità della tua torcia tattica. Questo innovativo accessorio si monta saldamente tra il corpo e il tappo posteriore della torcia, garantendo una presa ripetibile durante il suo utilizzo da tasche o borse.
Caratteristiche principali:
- Utilizzabile con pistole e fucili.
- Permette di estrarre e indicizzare la torcia da tasche e borse grazie all'anello di ritenzione rigido ma rilasciabile.
- Consente di sparare usando una presa naturale a due mani (tecnica SwitchBack).
- Supporta tutte le tecniche tradizionali in condizioni di scarsa illuminazione come Neck Index, Modified FBI e Harries.
- Ritiene positivamente la torcia durante l'estrazione di un'arma, il ricaricamento e la gestione di malfunzionamenti.
Il SwitchBack 2.0 offre un rapido dispiegamento e una maggiore ritenzione durante molte attività, come arrampicata, escursionismo, manutenzione di auto e casa, e autodifesa.
Novità del SwitchBack 2.0:
- Anello per le dita che si rilascia sotto forte forza/torque ma può essere ripristinato.
- Clip per tasca più robusta che funziona anche con il webbing MOLLE/PALS.
- Posizione della clip per tasca che consente un trasporto leggermente più profondo rispetto al SwitchBack® Large (originale).
- Sezione tubolare tagliata più in basso per consentire la presa su entrambi i lati del tappo posteriore durante l'installazione.
- Supporto per il pollice più ampio con caratteristiche di trazione.
- Piccole nervature di compressione sul bordo del SwitchBack 2.0 che creano una vestibilità personalizzata per una gamma più ampia di torce.
- Spaziatore in alluminio che espande la compatibilità a torce Streamlight HL e HL-X e ad altri produttori con design simili.
Installazione:
Per l'installazione, prova prima a montare il SwitchBack sulla tua torcia senza utilizzare l'O-ring o la rondella in alluminio. Semplicemente svita il tappo posteriore, aggiungi il SwitchBack e riavvita il tappo. Se la torcia non si attiva con l'interruttore del tappo posteriore installato il SwitchBack, prova a installare la rondella in alluminio come mostrato nel diagramma sottostante. I modelli Streamlight tendono a richiedere la rondella in alluminio, ma potrebbero non farlo, a seconda delle caratteristiche del tappo posteriore della torcia. I modelli Elzetta e Surefire di solito non richiedono la rondella in alluminio, ma gli utenti potrebbero scoprire che l'aggiunta dell'O-ring in gomma aiuta a stabilizzare la posizione del SwitchBack.