Brownells Italia - Il negozio online del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Italia
611760420009 749012736
The SAECO Lead Hardness Tester lets you positively identify the hardness of your cast lead bullets, verifying they’re safe to shoot and won’t damage your valuable firearm. You can cast bullets from scrap lead and check their hardness so you can shoot them with complete confidence. Or check the hardness of your black powder cast bullets to ensure proper seating in the rifling and consistent accuracy for BPCR competition. Just insert the bullet into the aluminum housing, turn the hardened steel indenter until it stops, then read the depth of penetration off the vernier scale to determine the hardness. The tester is calibrated from 0 to 10 using the SAECO scale. A hardness of at least 6 is required for medium velocities in handguns, while a reading of over 8 works best for magnum handgun bullets or gas-checked rifle bullets. (For reference, wheel weights usually test between 7 and 9, and linotype normally reads a 10.) An indispensable tool for anybody serious about bullet casting.
349.9 349.9 1 EUR
N. prodotto: 749012736
REDDING SAECO LEAD HARDNESS TESTER
Parti Fabbricante: 42000 611760420009 Il SAECO Lead Hardness Tester permette di identificare con precisione la durezza dei proiettili in piombo fuso, verificando che siano sicuri da sparare e non danneggino la vostra preziosa arma da fuoco. Potete fondere proiettili da piombo di recupero e controllarne la durezza per poterli sparare con totale fiducia. Oppure verificate la durezza dei vostri proiettili in piombo per polvere nera per assicurare un corretto posizionamento nelle rigature e un'accuratezza consistente per le competizioni BPCR. Basta inserire il proiettile nell'alloggiamento in alluminio, girare l'indentatore in acciaio temprato fino a quando non si ferma, poi leggere la profondità di penetrazione sulla scala vernier per determinare la durezza. Il tester è calibrato da 0 a 10 utilizzando la scala SAECO. Una durezza di almeno 6 è richiesta per velocità medie nelle armi corte, mentre una lettura di oltre 8 è ideale per proiettili da pistola magnum o proiettili da fucile con gas check. (Per riferimento, i pesi per equilibratura delle ruote di solito misurano tra 7 e 9, e il linotipo normalmente registra un 10.) Uno strumento indispensabile per chiunque prenda sul serio la fusione dei proiettili.
349.9 EUR 6 349,90 € *
Tempi di consegna circa 12-16 giorni.
6 pz. nel magazzino USA

Caratteristiche

Peso della spedizione: 0,204kg Altezza di spedizione: 33mm Larghezza di spedizione: 38mm Lunghezza di spedizione: 160mm

Dettagli dell'elemento

Made in Usa




The SAECO Lead Hardness Tester lets you positively identify the hardness of your cast lead bullets, verifying they’re safe to shoot and won’t damage your valuable firearm. You can cast bullets from scrap lead and check their hardness so you can shoot them with complete confidence. Or check the hardness of your black powder cast bullets to ensure proper seating in the rifling and consistent accuracy for BPCR competition. Just insert the bullet into the aluminum housing, turn the hardened steel indenter until it stops, then read the depth of penetration off the vernier scale to determine the hardness. The tester is calibrated from 0 to 10 using the SAECO scale. A hardness of at least 6 is required for medium velocities in handguns, while a reading of over 8 works best for magnum handgun bullets or gas-checked rifle bullets. (For reference, wheel weights usually test between 7 and 9, and linotype normally reads a 10.) An indispensable tool for anybody serious about bullet casting.
Riordinato
69,90 € * 39,90 € - 69,90 €*
Newsletter